Model of spectral course of aerosol attenuation coefficient for meteorological range of visibility more 15 km

2021 ◽  
Author(s):  
Nikolay N. Shchelkanov
Keyword(s):  
Attenuation Coefficient

scholarly journals X-ray Shielding, Mechanical, Physical, and Water Absorption Properties of Wood/PVC Composites Containing Bismuth Oxide

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2212
Author(s):  
Worawat Poltabtim ◽  
Ekachai Wimolmala ◽  
Teerasak Markpin ◽  
Narongrit Sombatsompop ◽  
Vichai Rosarpitak ◽  
...  
Keyword(s):  
Impact Strength ◽  
Water Absorption ◽  
Attenuation Coefficient ◽  
Bismuth Oxide ◽  
Morphological Properties ◽  
Linear Attenuation Coefficient ◽  
X Rays ◽  
Equivalent Thickness ◽  
X Ray ◽  
The Impact

The potential utilization of wood/polyvinyl chloride (WPVC) composites containing an X-ray protective filler, namely bismuth oxide (Bi2O3) particles, was investigated as novel, safe, and environmentally friendly X-ray shielding materials. The wood and Bi2O3 contents used in this work varied from 20 to 40 parts per hundred parts of PVC by weight (pph) and from 0 to 25, 50, 75, and 100 pph, respectively. The study considered X-ray shielding, mechanical, density, water absorption, and morphological properties. The results showed that the overall X-ray shielding parameters, namely the linear attenuation coefficient (µ), mass attenuation coefficient (µm), and lead equivalent thickness (Pbeq), of the WPVC composites increased with increasing Bi2O3 contents but slightly decreased at higher wood contents (40 pph). Furthermore, comparative Pbeq values between the wood/PVC composites and similar commercial X-ray shielding boards indicated that the recommended Bi2O3 contents for the 20 pph (40 ph) wood/PVC composites were 35, 85, and 40 pph (40, 100, and 45 pph) for the attenuation of 60, 100, and 150-kV X-rays, respectively. In addition, the increased Bi2O3 contents in the WPVC composites enhanced the Izod impact strength, hardness (Shore D), and density, but reduced water absorption. On the other hand, the increased wood contents increased the impact strength, hardness (Shore D), and water absorption but lowered the density of the composites. The overall results suggested that the developed WPVC composites had great potential to be used as effective X-ray shielding materials with Bi2O3 acting as a suitable X-ray protective filler.

scholarly journals Enhancement of the Shielding Capability of Soda–Lime Glasses with Sb2O3 Dopant: A Potential Material for Radiation Safety in Nuclear Installations

2020 ◽  
Vol 11 (1) ◽  
pp. 326
Author(s):  
M.I. Sayyed ◽  
K.A. Mahmoud ◽  
O.L. Tashlykov ◽  
Mayeen Uddin Khandaker ◽  
M.R.I. Faruque
Keyword(s):  
Attenuation Coefficient ◽  
Elastic Moduli ◽  
Gamma Ray ◽  
Radiation Safety ◽  
Soda Lime ◽  
Mass Attenuation Coefficient ◽  
Transmission Factor ◽  
Linear Attenuation Coefficient ◽  
Neutron Shielding ◽  
Removal Cross Section

Elastic moduli were theoretically computed using the Makishima–Mackenzie model for SiO2–Na2O–CaO glasses doped with Sb2O3 contents. The calculated elastic moduli (Young’s, bulk, shear, and longitudinal modulus) were observed to increase with an increase in the Sb2O3 contents. The microhardness showed an increase, while Poisson’s ratio decreased with the rise of the Sb2O3 contents. In addition, gamma-ray and neutron shielding parameters were evaluated for the investigated glasses. The linear attenuation coefficient (LAC) was simulated using the Monte Carlo N-particle transport code (MCNP-5). Other parameters, such as the mass attenuation coefficient (MAC), transmission factor (TF), and half-value layer, were calculated based on the simulated LAC. The addition of Sb2O3 content was observed to enhance the investigated glasses’ shielding parameters, where the highest LAC was achieved for the SCNSb10 glass with 10 mol% Sb2O3 and decreased from 0.441 to 0.154 cm−1 at gamma energies between 0.248 and 1.406 MeV. Furthermore, the fast neutron effective removal cross-section (∑R) was computed theoretically. The calculated results showed that the highest ∑R was equal to 0.0341 cm2g−1 and was obtained for the SCNSb0 glass, which had no Sb2O3 content, while the lowest ∑R was equal to 0.0286 cm2 g−1 for the SCNSb10 glass sample. The present work was carried out to examine the advantages of the soda–lime glasses with different Sb2O3 contents in several photon shielding applications, especially for radiation safety in nuclear installations.

scholarly journals Transverse Asymmetry of the Index Modulation Profile in Few-Mode Fiber Bragg Grating

Photonics ◽  
2021 ◽  
Vol 8 (3) ◽  
pp. 87
Author(s):  
Peihong Guan ◽  
Min Tang ◽  
Min Cao ◽  
Yuean Mi ◽  
Mei Liu ◽  
...  
Keyword(s):  
Fiber Bragg Grating ◽  
Attenuation Coefficient ◽  
Optical Communication ◽  
Mode Conversion ◽  
Bragg Grating ◽  
Mode Division Multiplexing ◽  
Single Side ◽  
Side Illumination ◽  
Index Modulation ◽  
Great Potential Application

The transverse asymmetry of the index modulation profile in the asymmetric few-mode fiber Bragg grating (FM-FBG) was investigated. The transverse asymmetry of the index modulation profile will lead to mode conversion between modes with the different azimuthal orders, and this asymmetry is characterized by the attenuation coefficient α. We evaluated that the value of attenuation coefficient α was 0.2 μm−1, and grating amplitude χ was 2.8 × 10−4 for FM-FBG inscribed by UV single-side illumination. We found that the optimized value of α was 0.16 μm−1, at which the maximum mode conversion efficiency of LP01–LP11 can be achieved. The results of this paper provide great potential application in few-mode fiber (FMF) devices and mode division multiplexing (MDM) optical communication.

scholarly journals Temperature Increase Dependence on Ultrasound Attenuation Coefficient in Innovative Tissue-mimicking Materials

2015 ◽  
Vol 70 ◽  
pp. 187-190 ◽  
Author(s):  
R. Cuccaro ◽  
C. Magnetto ◽  
P.A. Giuliano Albo ◽  
A. Troia ◽  
S. Lago
Keyword(s):  
Attenuation Coefficient ◽  
Temperature Increase ◽  
Ultrasound Attenuation
Sign in / Sign up

Export Citation Format

Share Document