Development of a methodology for the formation of surface systems with programmable nanostructure parameters for effective use in modern manufacturing

2021 ◽  
Author(s):  
Marina A. Volosova ◽  
Catherine Sotova ◽  
Ilya V. Minin ◽  
Sergey Ryabtsev ◽  
Jury Bublikov ◽  
...  
Keyword(s):  
Modern Manufacturing ◽  
Effective Use

The Effective Use in the Process of Numerical Control Technology in Mechanical Manufacturing

2014 ◽  
Vol 496-500 ◽  
pp. 1485-1488
Author(s):  
Lian Fu Yang ◽  
Hong Sun
Keyword(s):  
Crucial Role ◽  
Manufacturing Industry ◽  
Present Situation ◽  
Development Trend ◽  
Numerical Control ◽  
Control Technology ◽  
Modern Manufacturing ◽  
Traditional Processing ◽  
Effective Use ◽  
The Development Trend

With the development of the mechanical manufacturing industry, the traditional processing technology already cannot satisfy the needs of the development of the modern manufacturing industry. Numerical control technology has changed the situation. The rational use of numerical control technology in machining will play a crucial role to the development of modern industry. This paper analyzes application of numerical control technology in mechanical manufacturing, through the theory about the present situation of the application of numerical control technology, the development trend of numerical control technology points out the direction for the future.

Analysis of 3-d molecular distribution with the digital imaging microscope

1988 ◽  
Vol 46 ◽  
pp. 40-41
Author(s):  
W.A. Carrington ◽  
F.S. Fay ◽  
K.E. Fogarty ◽  
L. Lifshitz
Keyword(s):  
Image Restoration ◽  
Digital Imaging ◽  
Fluorescent Dyes ◽  
Optical Axis ◽  
Computer Hardware ◽  
Computer Algorithms ◽  
Low Contrast ◽  
Specific Proteins ◽  
Effective Use ◽  
Single Living Cells

Advances in digital imaging microscopy and in the synthesis of fluorescent dyes allow the determination of 3D distribution of specific proteins, ions, GNA or DNA in single living cells. Effective use of this technology requires a combination of optical and computer hardware and software for image restoration, feature extraction and computer graphics.The digital imaging microscope consists of a conventional epifluorescence microscope with computer controlled focus, excitation and emission wavelength and duration of excitation. Images are recorded with a cooled (-80°C) CCD. 3D images are obtained as a series of optical sections at .25 - .5 μm intervals.A conventional microscope has substantial blurring along its optical axis. Out of focus contributions to a single optical section cause low contrast and flare; details are poorly resolved along the optical axis. We have developed new computer algorithms for reversing these distortions. These image restoration techniques and scanning confocal microscopes yield significantly better images; the results from the two are comparable.

The Impact of Visual Feedback Type on the Mastery of Visuo-Motor Transformations

2012 ◽  
Vol 220 (1) ◽  
pp. 3-9 ◽  
Author(s):  
Sandra Sülzenbrück
Keyword(s):  
Empirical Research ◽  
Visual Feedback ◽  
Closed Loop ◽  
Motor Planning ◽  
Visual Input ◽  
Closed Loop Control ◽  
Loop Control ◽  
Feedback Type ◽  
Effective Use ◽  
The Impact

For the effective use of modern tools, the inherent visuo-motor transformation needs to be mastered. The successful adjustment to and learning of these transformations crucially depends on practice conditions, particularly on the type of visual feedback during practice. Here, a review about empirical research exploring the influence of continuous and terminal visual feedback during practice on the mastery of visuo-motor transformations is provided. Two studies investigating the impact of the type of visual feedback on either direction-dependent visuo-motor gains or the complex visuo-motor transformation of a virtual two-sided lever are presented in more detail. The findings of these studies indicate that the continuous availability of visual feedback supports performance when closed-loop control is possible, but impairs performance when visual input is no longer available. Different approaches to explain these performance differences due to the type of visual feedback during practice are considered. For example, these differences could reflect a process of re-optimization of motor planning in a novel environment or represent effects of the specificity of practice. Furthermore, differences in the allocation of attention during movements with terminal and continuous visual feedback could account for the observed differences.

Professional skills for an effective use of phytotherapy in poultry and pig production in Europe

Planta Medica ◽  
2016 ◽  
Vol 81 (S 01) ◽  
pp. S1-S381
Author(s):  
F González César ◽  
BP Isabel ◽  
A Velarde ◽  
D Keller
Keyword(s):  
Professional Skills ◽  
Pig Production ◽  
Effective Use

Management of Hemophilia in France

1976 ◽  
Vol 35 (03) ◽  
pp. 553-558 ◽  
Author(s):  
Jean-Pierre Allain
Keyword(s):  
Home Care ◽  
Replacement Therapy ◽  
The Other ◽  
Blood Components ◽  
Careful Evaluation ◽  
Viii And Ix ◽  
Effective Use ◽  
General Care

SummaryTwo important factors concerning the management of hemophilia in France are considered.The supply of factors VIII and IX for replacement therapy meets the current demand but as the demand increases with the development of self-infusion programs, the production will also have to increase. This can only be done through more effective use of all of the blood components and will require careful evaluation of the needs of each patient.Programs which teach self-infusion and the other aspects of home care are gradually allowing the hemophiliac and his family better understanding of the disease. These programs are developing slowly in France but must be expanded to improve the general care of all French hemophiliacs.

Models of Development Based on Technology Diffusion

2012 ◽  
pp. 117-131 ◽  
Author(s):  
O. Golichenko
Keyword(s):  
Knowledge Transfer ◽  
Technology Diffusion ◽  
Technology Development ◽  
International Competition ◽  
Global Knowledge ◽  
Technology Knowledge ◽  
Catching Up ◽  
Technological Potential ◽  
Models Of Development ◽  
Effective Use

The problems of multifold increase of technological potential of developing countries are considered in the article. To solve them, i.e. to organize effectively tapping into global knowledge and their absorption, the performance of two diffusion channels is considered: open knowledge transfer and commercial knowledge transfer. The models of technological catching-up are investigated. Two of them are found to give an opportunity of effective use of international competition and global technology knowledge as a driver of technology development.

Sign in / Sign up

Export Citation Format

Share Document