Research on sound absorption performance of ultra-thin metal micro-perforated panel absorber

2021 ◽  
Author(s):  
He Xu ◽  
Deyi Kong ◽  
Yujie Qian ◽  
Ming Hu ◽  
Xiaoning Tang
Keyword(s):  
Sound Absorption ◽  
Thin Metal ◽  
Absorption Performance ◽  
Panel Absorber

Investigation of a Compound Perforated Panel Absorber With Backing Cavities Partially Filled With Polymer Materials

2015 ◽  
Vol 137 (4) ◽  
Author(s):  
C. Q. Wang ◽  
Y. S. Choy
Keyword(s):  
Sound Absorption ◽  
Normal Incidence ◽  
Polyester Fiber ◽  
Polymer Materials ◽  
Element Simulation ◽  
Parallel Arrangement ◽  
Cavity Configuration ◽  
Absorption Performance ◽  
Good Agreement ◽  
Panel Absorber

The paper concerns the sound absorption performance of a compound absorber which consists of a parallel arrangement of multiple perforated panel absorbers of different backing cavity depths partially filled with poroelastic polymer materials. Three polymer materials are considered: expandable polystyrene (EPS) foam, polymethacrylimide (PMI) foam, and polyester fiber. The normal incidence sound absorption coefficients of the compound panel absorber are tested experimentally. Results show that the former two foams can achieve similar absorption performance to the rigid cavity configuration, while the resonances shift to lower frequencies due to the changes of effective cavity depths. It is also found that the additional attenuation by polymer foams may improve sound absorption, but the effect is marginal. For polyester fiber, results show that it performs more like a single perforated panel absorber. Finite element simulation of the compound panel absorber is also discussed, and good agreement is observed between simulated and experimental results.

scholarly journals Sound absorption behavior of woven fabrics as micro perforated panel absorber

2021 ◽  
Vol 1896 (1) ◽  
pp. 012003
Author(s):  
Gunawan ◽  
I Prasetiyo ◽  
D R Adhika ◽  
F Brahmana ◽  
B Yuliarto
Keyword(s):  
Sound Absorption ◽  
Woven Fabrics ◽  
Panel Absorber

Sound absorption performance of flexible polyurethane/silicon dioxide perforated coating composites

2021 ◽  
pp. 004051752110155
Author(s):  
Min Peng ◽  
Xiaoming Zhao ◽  
Weibin Li
Keyword(s):  
Silicon Dioxide ◽  
Sound Absorption ◽  
Woven Fabric ◽  
Perforation Rate ◽  
Cavity Depth ◽  
Resonant Frequencies ◽  
The Matrix ◽  
Absorption Performance ◽  
Traditional Sense ◽  
Flexible Polyurethane

Perforated materials in the traditional sense are rigid, usually dense, costly and inflexible. For this study, polyester/cotton blended woven fabric as the base fabric, nano-SiO2 (silicon dioxide) as the functional particles and PU (polyurethane) as the matrix were selected. Accordingly, flexible PU/SiO2 perforated coating composites with different process parameters were developed. The influence of the nano-SiO2 content, perforation diameter, perforation rate, number of fiber felt layers and cavity depth on the sound absorption coefficient were investigated. The resonant frequencies of materials with different cavity depths were evaluated by both theoretical calculation and experimental method. It was found that the flexible perforated composite has good sound absorption and mechanical properties, and has great potential for applications requiring soft and lightweight sound absorption materials.

scholarly journals Diffuse Sound Absorptive Properties of Parallel-Arranged Perforated Plates with Extended Tubes and Porous Materials

Materials ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1091 ◽  
Author(s):  
Dengke Li ◽  
Daoqing Chang ◽  
Bilong Liu
Keyword(s):  
Boundary Condition ◽  
Porous Material ◽  
Porous Materials ◽  
Sound Absorption ◽  
Azimuthal Angle ◽  
Octave Band ◽  
Frequency Range ◽  
Absorption Coefficients ◽  
Perforated Plates ◽  
Absorption Performance

The diffuse sound absorption was investigated theoretically and experimentally for a periodically arranged sound absorber composed of perforated plates with extended tubes (PPETs) and porous materials. The calculation formulae related to the boundary condition are derived for the periodic absorbers, and then the equations are solved numerically. The influences of the incidence and azimuthal angle, and the period of absorber arrangement are investigated on the sound absorption. The sound-absorption coefficients are tested in a standard reverberation room for a periodic absorber composed of units of three parallel-arranged PPETs and porous material. The measured 1/3-octave band sound-absorption coefficients agree well with the theoretical prediction. Both theoretical and measured results suggest that the periodic PPET absorbers have good sound-absorption performance in the low- to mid-frequency range in diffuse field.

scholarly journals Application of transparent microperforated panel to acrylic partitions for desktop use: A case study by prototyping

2021 ◽  
Author(s):  
Kimihiro Sakagami ◽  
Midori Kusaka ◽  
Takeshi Okuzono ◽  
Shigeyuki Kido ◽  
Daichi Yamaguchi
Keyword(s):  
Adverse Effect ◽  
Sound Absorption ◽  
Acoustic Environment ◽  
Actual Use ◽  
Acrylic Sheet ◽  
Absorption Performance ◽  
The Subject ◽  
Droplet Penetration ◽  
Absorption Characteristics

There are various measures currently in place to prevent the spread of COVID-19; however, in some cases, these can have an adverse effect on the acoustic environment in buildings. For example, transparent acrylic partitions are often used in eating establishments, meeting rooms, offices, etc., to prevent droplet infection. However, acrylic partitions are acoustically reflective; therefore, reflected sounds may cause acoustic problems such as difficulties in conversation or the leakage of conversation. In this study, we performed a prototyping of transparent acrylic partitions to which a microperforated panel (MPP) was applied for sound absorption while maintaining transparency. The proposed partition is a triple-leaf acrylic partition with a single acrylic sheet without holes between two MPP sheets, as including a hole-free panel is important to a possible droplet penetration. The sound absorption characteristics were investigated by measuring the sound absorption in a reverberation room. As the original prototype showed sound absorption characteristics with a gentle peak and low values due to the openings on the periphery, it was modified by closing the openings of the top and sides. The sound absorption performance was improved to some extent when the top and sides were closed, although there remains the possibility of further improvement. This time, only the sound absorption characteristics were examined in the prototype experiments. The effects during actual use will be the subject of future study.

Sound absorption of a finite flexible micro-perforated panel absorber back by a rigid air cavity filled with a fibrous porous material

2021 ◽  
Vol 263 (3) ◽  
pp. 3625-3632
Author(s):  
Ho Yong Kim ◽  
Yeon June Kang
Keyword(s):  
Energy Dissipation ◽  
Porous Material ◽  
Fibrous Material ◽  
Alternative Energy ◽  
Sound Absorption ◽  
Sound Pressure ◽  
Absorption Coefficients ◽  
Air Cavity ◽  
Acoustic Cavity ◽  
Absorption Performance

Back by a rigid cavity filled with a layer of porous layer, the sound absorption performance of a micro-perforated panel (MPP) can be enhanced in comparison with other resonance based sound absorbers. In this paper, a theoretical model of a finite flexible MPP back by a rigid air cavity filled with a fibrous porous material is developed to predict normal sound absorption coefficients. Displacements of MPP and sound pressure field in fibrous porous material and acoustic cavity are expressed using a series of modal functions, and the sound absorption coefficients of MPP system are obtained. Additionally, comparison of energy dissipation by MPP and fibrous material is performed to identify effects of a fibrous material on the sound absorption of a MPP. As expected, at anti-resonance frequency of an MPP, the fibrous material provide an alternative energy dissipation mechanism.

Sign in / Sign up

Export Citation Format

Share Document