<title>Stress-wave nondestructive evaluation of green veneer: southern yellow pine and Douglas fir</title>

Abstract Soy flour was evaluated as a partial substitute for resin in the manufacture of oriented strand board (OSB), a wood-based composite that often replaces solid lumber and plywood in structural applications in the construction industry. Since the presence of soy could alter OSB biodegradation properties, termite resistance of OSB panels made with 0, 10, and 20 percent of polymeric methylene diphenyl diisocyanate (pMDI) resin substituted with soy flour (OSB0, OSB10, and OSB20, respectively) was investigated. Single choice tests between three types of OSB and southern yellow pine (SYP) solid wood and an OSB choice test (OSB0 vs. OSB10) were evaluated. Results indicated that termites always showed a preference for SYP, with the OSB becoming less palatable when soy flour was present. Percentage weight losses for OSB0, OSB10, and OSB20 were 5.7×, 8.4×, and 8.6× less, respectively, compared with SYP. In the absence of SYP, termites did not differentiate OSB0 from OSB10, with OSB10 showing 1.5× less weight loss compared with OSB0. Visual rating data supported weight loss data, except significantly less damage was only found when the choice paired SYP with OSB made with soy (OSB10 or OSB20). Termite consumption preference for SYP was explained by differences in water absorption kinetics. SYP reached saturation (105% moisture content) within 1 week on moist sand, while moisture content of OSB composites slowly climbed to 79 percent over 4 weeks, never reaching a plateau. Lower moisture content was due to the presence of water-repellent resin and wax in the OSB.

Download Full-text

The Effect of Variables on Laboratory Termite Testing: Part 4—Test Block Species, Size, and Test Photoperiod

Forest Products Journal ◽

10.13073/fpj-d-20-00070 ◽

2021 ◽

Vol 71 (2) ◽

pp. 95-100

Author(s):

G. B. Lindsey ◽

T. L. Amburgey ◽

H. M. Barnes

Keyword(s):

Native Species ◽

Wood Sample ◽

Treated Wood ◽

Reticulitermes Flavipes ◽

Coptotermes Formosanus ◽

Standard Laboratory ◽

Yellow Pine ◽

Southern Yellow Pine ◽

The Impact ◽

Standard Tests

Abstract The objective of this study was to determine the impact on termite feeding of wood sample size and species and test photoperiod in standard tests. Native species (Reticulitermes flavipes) and introduced species (Coptotermes formosanus) were tested in an American Wood-Preservers' Association E1 standard laboratory test. For testing involving treated wood, southern yellow pine was determined to be preferable to spruce based on its treatability and availability. Test blocks of 25 by 25 by 6 mm were deemed adequate for testing, with large blocks presenting difficulty with retrieval of termites to determine mortality and smaller blocks being consumed too rapidly by the termites in the test. Photoperiod comparisons were not significantly different for R. flavipes; however, C. formosanus indicated a preference for 100 percent darkness. Therefore, the recommendation is to maintain tests using each species in a 100 percent dark environment.

Download Full-text

A Bid Price Equation for National Forest Timber Sales in Western Arkansas and Southeastern Oklahoma

Southern Journal of Applied Forestry ◽

10.1093/sjaf/28.2.100 ◽

2004 ◽

Vol 28 (2) ◽

pp. 100-108 ◽

Cited By ~ 1

Author(s):

Thomas B. Lynch ◽

Michael M. Huebschmann ◽

David K. Lewis ◽

Daniel S. Tilley ◽

James M. Guldin

Keyword(s):

Price Equation ◽

Pinus Echinata ◽

Shortleaf Pine ◽

Producer Price ◽

Timber Sales ◽

Dimension Lumber ◽

Bid Price ◽

Yellow Pine ◽

Timber Sale ◽

Southern Yellow Pine

Abstract An equation relating bid price to timber sale characteristics was developed using regression techniques on the basis of data from 150 timber sales that occurred between June 1992 and Dec. 1998 in the Ozark and Ouachita National Forests in Arkansas and southeastern Oklahoma. Predicted values of the real winning bid price are based on total sawtimber volume per sale, total pulpwood volume per sale, average sawtimber volume per acre, average sawtimber volume per tree, and the ratio of southern yellow pine #2 dimension lumber producer price index (PPI) to pine sawlog PPI. Sawtimber and pulpwood in these sales are mainly shortleaf pine (Pinus echinata Mill.). The most highly significant variables were total sawtimber volume and the ratio of southern yellow pine #2 dimension lumber PPI to pine sawlog PPI. The equation explains 95% of the variation in the total bid price data. South. J. Appl. For. 28(2):100–108.

Download Full-text

Microdistribution of copper in copper-ethanolamine (Cu-EA) treated southern yellow pine (Pinus spp.) related to density distribution

Holzforschung ◽

10.1515/hf.2005.013 ◽

2005 ◽

Vol 59 (1) ◽

pp. 82-89 ◽

Cited By ~ 7

Author(s):

Jinzhen Cao ◽

D. Pascal Kamdem

Keyword(s):

Cell Wall ◽

Density Distribution ◽

Cell Walls ◽

Middle Lamella ◽

Treated Wood ◽

Yellow Pine ◽

Using Data ◽

Pinus Spp ◽

Southern Yellow Pine ◽

The Relationship

Abstract The relationship between copper absorption and density distribution in wood cell walls was investigated in this study. The density distribution on layer level was obtained from two approaches: (1) calculation by using data obtained from literature; (2) microdistribution of carbon and oxygen atoms in the wood cell. The microdistribution of carbon and oxygen in untreated southern yellow pine (Pinus spp.) sapwood, as well as copper in cell walls of copper-ethanolamine (Cu-EA) treated wood was determined by scanning electron microscopy coupled with energy dispersive X-ray analysis (SEM-EDXA). Both approaches for density distribution led to the same result: the density was higher in the compound middle lamella and cell corners than in the secondary wall. The concentration/intensity of Cu, C and O in the cell wall follow the same trend as the density distribution; suggesting that density may play a major role in SEM-EDXA study of the distribution of metal-containing wood preservatives within the wood cell wall.

Download Full-text