Multi-modal hyperspectral microscopy imaging as a forensic tool in trace evidence detection

2021 ◽  
Author(s):  
John R. Gilchrist ◽  
Yingwang Gao ◽  
Tristan Haldane ◽  
Stephen Cambell ◽  
Natalie Smyth ◽  
...  
Keyword(s):  
Trace Evidence ◽  
Microscopy Imaging

Low - Voltage Scanning Electron Microscopy Imaging, Secondary and Backscatter, With Microchannel Plate Detector

1990 ◽  
Vol 48 (1) ◽  
pp. 442-442
Author(s):  
Galen Powers ◽  
Ray Cochran
Keyword(s):  
Low Voltage ◽  
Beam Current ◽  
Microchannel Plate ◽  
Normal Operation ◽  
Microscopy Imaging ◽  
Backscatter Signal ◽  
Vacuum Interface ◽  
Width Measurements ◽  
Working Distance ◽  
Beam Currents

The capability to obtain symmetrical images at voltages as low as 200 eV and beam currents less than 9 pico amps is believed to be advantageous for metrology and study of dielectric or biological samples. Symmetrical images should allow more precise and accurate line width measurements than currently achievable by traditional secondary electron detectors. The low voltage and current capability should allow imaging of samples which traditionally have been difficult because of charging or electron beam damage.The detector system consists of a lens mounted dual anode MicroChannel Plate (MCP) detector, vacuum interface, power supplies, and signal conditioning to interface directly to the video card of the SEM. The detector has been miniaturized so that it does not interfere with normal operation of the SEM sample handling and alternate detector operation. Biasing of the detector collection face will either add secondaries to the backscatter signal or reject secondaries yielding only a backscatter image. The dual anode design allows A−B signal processing to provide topological information as well as symmetrical A+B images.Photomicrographs will show some of the system capabilities. Resolution will be documented with gold on carbon. Variation of voltage, beam current, and working distance on dielectric samples such as glass and photoresist will demonstrate effects of common parameter changes.

Dual-stage piezo nanopositioner for high-speed ion conductance microscopy imaging

2020 ◽  
Vol 28 (10) ◽  
pp. 2203-2214
Author(s):  
Jian ZHUANG ◽  
◽  
Zhi-wu WANG ◽  
Xiao-bo LIAO ◽  
Keyword(s):  
High Speed ◽  
Microscopy Imaging ◽  
Ion Conductance ◽  
Dual Stage

The Use of a Sequential Extraction Technique to Characterize Soil Trace Evidence Recovered from a Spade in a Murder Case in Brazil*

2020 ◽  
Vol 65 (6) ◽  
pp. 1921-1934 ◽  
Author(s):  
Samara Alves Testoni ◽  
Vander Freitas Melo ◽  
Lorna Anne Dawson ◽  
Joice Malakoski ◽  
Edimar Cunico ◽  
...  
Keyword(s):  
Sequential Extraction ◽  
Extraction Technique ◽  
Trace Evidence

scholarly journals Use of electromagnetic stimulation on an Enterococcus faecalis biofilm on root canal treated teeth in vitro

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Beatriz H. D. Panariello ◽  
Justin K. Kindler ◽  
Kenneth J. Spolnik ◽  
Ygal Ehrlich ◽  
George J. Eckert ◽  
...  
Keyword(s):  
Enterococcus Faecalis ◽  
Root Canal ◽  
Laser Scanning ◽  
Confocal Imaging ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Microscopy Imaging ◽  
Electromagnetic Stimulation ◽  
Root Canal Disinfection

AbstractRoot canal disinfection is of utmost importance in the success of the treatment, thus, a novel method for achieving root canal disinfection by electromagnetic waves, creating a synergistic reaction via electric and thermal energy, was created. To study electromagnetic stimulation (EMS) for the disinfection of root canal in vitro, single rooted teeth were instrumented with a 45.05 Wave One Gold reciprocating file. Specimens were sterilized and inoculated with Enterococcus faecalis ATCC 29,212, which grew for 15 days to form an established biofilm. Samples were treated with 6% sodium hypochlorite (NaOCl), 1.5% NaOCl 1.5% NaOCl with EMS, 0.9% saline with EMS or 0.9% saline. After treatments, the colony forming units (CFU) was determined. Data was analyzed by Wilcoxon Rank Sums Test (α = 0.05). One sample per group was scored and split for confocal laser scanning microscopy imaging. There was a significant effect with the use of NaOCl with or without EMS versus 0.9% saline with or without EMS (p = 0.012 and 0.003, respectively). CFUs were lower when using 0.9% saline with EMS versus 0.9% saline alone (p = 0.002). Confocal imaging confirmed CFU findings. EMS with saline has an antibiofilm effect against E. faecalis and can potentially be applied for endodontic disinfection.

scholarly journals Is Dialdehyde Chitosan a Good Substance to Modify Physicochemical Properties of Biopolymeric Materials?

2021 ◽  
Vol 22 (7) ◽  
pp. 3391
Author(s):  
Sylwia Grabska-Zielińska ◽  
Alina Sionkowska ◽  
Ewa Olewnik-Kruszkowska ◽  
Katarzyna Reczyńska ◽  
Elżbieta Pamuła
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Physicochemical Properties ◽  
Silk Fibroin ◽  
Three Dimensional ◽  
Microscopy Imaging ◽  
Maximum Deformation ◽  
One Step ◽  
Chitosan Blends ◽  
Fourier Transfer Infrared Spectroscopy

The aim of this work was to compare physicochemical properties of three dimensional scaffolds based on silk fibroin, collagen and chitosan blends, cross-linked with dialdehyde starch (DAS) and dialdehyde chitosan (DAC). DAS was commercially available, while DAC was obtained by one-step synthesis. Structure and physicochemical properties of the materials were characterized using Fourier transfer infrared spectroscopy with attenuated total reflectance device (FTIR-ATR), swelling behavior and water content measurements, porosity and density observations, scanning electron microscopy imaging (SEM), mechanical properties evaluation and thermogravimetric analysis. Metabolic activity with AlamarBlue assay and live/dead fluorescence staining were performed to evaluate the cytocompatibility of the obtained materials with MG-63 osteoblast-like cells. The results showed that the properties of the scaffolds based on silk fibroin, collagen and chitosan can be modified by chemical cross-linking with DAS and DAC. It was found that DAS and DAC have different influence on the properties of biopolymeric scaffolds. Materials cross-linked with DAS were characterized by higher swelling ability (~4000% for DAS cross-linked materials; ~2500% for DAC cross-linked materials), they had lower density (Coll/CTS/30SF scaffold cross-linked with DAS: 21.8 ± 2.4 g/cm3; cross-linked with DAC: 14.6 ± 0.7 g/cm3) and lower mechanical properties (maximum deformation for DAC cross-linked scaffolds was about 69%; for DAS cross-linked scaffolds it was in the range of 12.67 ± 1.51% and 19.83 ± 1.30%) in comparison to materials cross-linked with DAC. Additionally, scaffolds cross-linked with DAS exhibited higher biocompatibility than those cross-linked with DAC. However, the obtained results showed that both types of scaffolds can provide the support required in regenerative medicine and tissue engineering. The scaffolds presented in the present work can be potentially used in bone tissue engineering to facilitate healing of small bone defects.

Sign in / Sign up

Export Citation Format

Share Document