Detection of Bragg wavelength shift with high resolution based on an Erbium-doped fiber Bragg grating

2020 ◽  
Author(s):  
Li Kai ◽  
Junqiang Sun
Keyword(s):  
High Resolution ◽  
Fiber Bragg Grating ◽  
Bragg Grating ◽  
Wavelength Shift ◽  
Bragg Wavelength ◽  
Erbium Doped

Development of Fiber Bragg Grating (FBG) as Temperature Sensor Inside Packed-bed Non-thermal Plasma Reactor

2014 ◽  
Vol 68 (3) ◽  
Author(s):  
Siti Musliha Aishah Musa ◽  
RK Raja Ibrahim ◽  
Asrul Izam Azmi
Keyword(s):  
Fiber Bragg Grating ◽  
Temperature Variation ◽  
Thermal Plasma ◽  
Temperature Sensor ◽  
Plasma Reactor ◽  
Packed Bed ◽  
Bragg Grating ◽  
Wavelength Shift ◽  
Bragg Wavelength ◽  
Non Thermal Plasma

This paper presents early work on Fiber Bragg grating (FBG) as temperature sensor to monitor temperature variation inside a packed-bed non-thermal plasma reactor. FBG made from germania-doped fiber with center Bragg wavelength of 1552.5 nm was embedded inside non-thermal plasma reactor with sphere shape dielectric bead (barium titanate) and used to probe the temperature variation inside the reactor. The experimental works have proven that FBG is a suitable sensor to monitor temperature variation inside of reactor via LabVIEW program. Besides that, Optical Spectrum Analyzer (OSA) recorded Bragg wavelength shift as voltage of power supply increases, which indicate the non-uniform temperature variation occurring inside the reactor. However, it does not affect the chemical reaction inside the reactor because the temperature condition is in steady state.

Study on Fiber Bragg Grating Large Current Sensor

2013 ◽  
Vol 823 ◽  
pp. 513-516
Author(s):  
Xin Wang ◽  
Jun Lin Wang
Keyword(s):  
Fiber Bragg Grating ◽  
Rogowski Coil ◽  
Bragg Grating ◽  
Wavelength Shift ◽  
Bragg Wavelength ◽  
Large Power ◽  
Giant Magnetostrictive Material ◽  
Large Current ◽  
Current Detection ◽  
Detection Unit

The large power current is sampled by Rogowski coil, then transforms the sampling signals from AC to DC and regulates the signals, the current detection unit is formed with FBG (Fiber Bragg Grating) and GMM (Giant Magnetostrictive Material), the current measurement is achieved based on the F-P interferometer filter demodulation system, finally, linear relationship between the Bragg wavelength shift and external current is validated by experiment.

Fiber Bragg Grating Demodulation System Based on Equi-Intensity Cantilever Beam

2010 ◽  
Vol 437 ◽  
pp. 359-363
Author(s):  
Hong Li ◽  
Wei Ping Yan ◽  
Ren Sheng Shen ◽  
Ben Yu Wang
Keyword(s):  
Fiber Bragg Grating ◽  
Cantilever Beam ◽  
Optical Spectrum ◽  
Optical Signal ◽  
Electrical Signal ◽  
Bragg Grating ◽  
Wavelength Shift ◽  
Optical Spectrum Analyzer ◽  
Bragg Wavelength ◽  
Scanning Velocity

Optical spectrum analyzer (OSA) can achieve the higher precision and sensitivity, but it is disadvantageous for translating optical signal into electrical signal. A fiber Bragg grating (FBG) matched filtering system based on equi-intensity cantilever beam was presented in this paper. Strain characteristics in different location of cantilever beam were described, and the strain sensitivity of matching grating demodulation based on equi-intensity cantilever beam was deduced mathematically. Strain characteristics of cantilever beam were verified, and the sensing effect of the system was tested. The Bragg wavelength shift range of the demodulating FBG placed on the cantilever beam reached 10 nm, and scanning velocity was 0.125 nm/s. The system could demodulate slow-altered sensing signal accurately and rapidly.

Monitoring of Microorganisms Growth Process Based on Fiber Bragg Grating Biosensor

2011 ◽  
Vol 84-85 ◽  
pp. 586-589
Author(s):  
Ming Fu Zhao ◽  
De Yi Huang ◽  
Lei Zi Jiao ◽  
Xue Mei Cao ◽  
Xi Han
Keyword(s):  
Refractive Index ◽  
Fiber Bragg Grating ◽  
Nonlinear Behavior ◽  
Bragg Grating ◽  
Wavelength Shift ◽  
Refractive Index Sensitivity ◽  
Bragg Wavelength ◽  
Index Changes ◽  
Index Sensitivity ◽  
The Relationship

The low refractive index sensing principle of the fiber Bragg grating (FBG) was analyzed theoretically, the temperature compensation scheme corresponding to the theoretical model was established. A single-end etched FBG was designed and fabricated for simultaneous measurement of temperature and refractive index. The experimental results demonstrated that the Bragg wavelength shift exhibits a nonlinear behavior with the temperature and yeast refractive index changes. The temperature change to the influence of the sensor was eliminated by numerical analysis, and then the relationship between the Bragg wavelength shift and the yeast refractive index is linear, the sensor yeast refractive index sensitivity of 5.42nm/riu was obtained.

Application of Fiber Bragg Grating Sensor coated with Polyaniline as an optical Sensor for chloroform detection

2017 ◽  
Vol 25 (7) ◽  
pp. 555-562
Author(s):  
Irma Zulayka Mohamad Ahad ◽  
Sulaiman Wadi Harun ◽  
Seng neon Gan ◽  
Sook Wai Phang
Keyword(s):  
Thin Film ◽  
Fiber Bragg Grating ◽  
Optical Sensor ◽  
Fast Response ◽  
Chemical Oxidation ◽  
Bragg Grating ◽  
Wavelength Shift ◽  
Peak Ratio ◽  
Bragg Wavelength ◽  
Fbg Sensor

Fiber Bragg Grating (FBG) sensor coated with PAni was designed as a sensing device in chloroform detection. PAni thin film was synthesized through chemical oxidation method by using aniline (Ani) as a monomer, ammonium persulphate (APS) as an initiator and dioctyl sodium sulfosuccinate (AOT) as a dopant. The chemical structure of PAni thin film was confirmed by using Fourier transform infrared (FTIR) and ultraviolet-visible (UV-Vis) spectrometer. The conducting behaviour of PAni thin film (1.157 × 10−2 S/cm) was determined by using four-point probe measurement. In the optical sensor part, FBG was etched in hydrofluoric acid solution (48% HF) to remove the cladding layer on fiber before coated with PAni. The response of this sensor was monitored based on the different of Bragg wavelength shift at ∼1557 nm in an optical spectrum analyzer (OSA) detector. PAni-coated FBG significantly increased in the Bragg wavelength shift (sensitivity = 0.0009) compared with uncoated FBG (sensitivity = 0.0002). The interaction between PAni and chloroform was significantly confirmed by the “polaron peak ratio” (Pf/Pi) and “quinoid and benzenoid peak ratio” (IQ/ IB) through UV-vis and FTIR spectroscopy analysis. In this study, FBG sensor coated with PAni thin film had been found as an efficient sensor in chloroform detection with fast response time (7 s).

Chemical Sensors Based on Fiber Bragg Grating

2011 ◽  
Vol 84-85 ◽  
pp. 582-585 ◽  
Author(s):  
Ming Fu Zhao ◽  
De Yi Huang ◽  
Bin Zhou ◽  
Lei Zi Jiao
Keyword(s):  
Refractive Index ◽  
Fiber Bragg Grating ◽  
Chemical Sensor ◽  
Bragg Grating ◽  
Wavelength Shift ◽  
Bragg Wavelength ◽  
Chemical Substances ◽  
Fbg Sensor ◽  
Surrounding Refractive Index ◽  
The Relationship

In this paper, measurement method for the refractive index of chemical substances based on fiber Bragg grating (FBG) sensor was proposed. The relation between Bragg wavelength shift and surrounding refractive index (SRI) was analyzed theoretically and experimentally. The SRI sensitivity of the chemical sensor could be enhanced by reducing the cladding thickness of the FBG using hydrofluoric acid (HF) solution etching process. The experimental results indicated that the variation of Bragg wavelength increased as the SRI increased. In the low SRI region, the relationship between the Bragg wavelength shift and the change of the SRI was approximately linear.

scholarly journals Simultaneous Measurement of Temperature and Mechanical Strain Using a Fiber Bragg Grating Sensor

Sensors ◽  
2020 ◽  
Vol 20 (15) ◽  
pp. 4223
Author(s):  
Shiuh-Chuan Her ◽  
Wei-Nan Lin
Keyword(s):  
Theoretical Prediction ◽  
Fiber Bragg Grating ◽  
Mechanical Strain ◽  
Bragg Grating ◽  
Wavelength Shift ◽  
Physical Parameters ◽  
Bragg Wavelength ◽  
Fbg Sensor ◽  
Host Structure ◽  
As Stress

Based on the shift of the Bragg wavelength, fiber Bragg grating (FBG) sensors have been employed to measure a variety of physical parameters such as stress, strain, displacement, temperature, vibration and pressure. In this work, a simple and easy way to be implemented FBG sensing methodology was proposed to measure the temperature and strain simultaneously. Half of the FBG was bonded on the host structure, while the other half of the FBG was left free. The host structure was an aluminum test specimen with dimensions of 20 × 3.8 × 0.5 cm3. As the host structure subjected to mechanical and thermal loadings, the Bragg wavelengths reflected from the bonded and unbonded FBGs are different. Theoretical predictions of the Bragg wavelength shifts of the bonded and unbonded FBGs were presented. Utilizing the Bragg wavelength shift of unbonded FBG, the temperature can be determined and is independent of mechanical strain. The Bragg wavelength shift of the bonded FBG allows the determination of the mechanical strain. The temperature measured by FBG sensor was compared with the result from a thermocouple, while the mechanical strain was validated with the theoretical prediction. Good agreement between the experimental measurement and theoretical prediction demonstrates that temperature-strain discrimination can be realized using the proposed method with one single FBG sensor.

scholarly journals Wireless, Portable Fiber Bragg Grating Interrogation System Employing Optical Edge Filter

Sensors ◽  
2019 ◽  
Vol 19 (14) ◽  
pp. 3222 ◽  
Author(s):  
Ken Ogawa ◽  
Shouhei Koyama ◽  
Yuuki Haseda ◽  
Keiichi Fujita ◽  
Hiroaki Ishizawa ◽  
...  
Keyword(s):  
Fiber Bragg Grating ◽  
Broad Band ◽  
Optical Power ◽  
Bragg Grating ◽  
Wavelength Shift ◽  
Laptop Computer ◽  
Bragg Wavelength ◽  
Amplifier Circuit ◽  
Edge Filter ◽  
Vital Sign Measurement

A small-size, high-precision fiber Bragg grating interrogator was developed for continuous plethysmograph monitoring. The interrogator employs optical edge filters, which were integrated with a broad-band light source and photodetector to demodulate the Bragg wavelength shift. An amplifier circuit was designed to effectively amplify the plethysmograph signal, obtained as a small vibration of optical power on the large offset. The standard deviation of the measured Bragg wavelength was about 0.1 pm. The developed edge filter module and amplifier circuit were encased with a single-board computer and communicated with a laptop computer via Wi-Fi. As a result, the plethysmograph was clearly obtained remotely, indicating the possibility of continuous vital sign measurement.

Sign in / Sign up

Export Citation Format

Share Document