If shear waves are to be recorded, all other types of waves (including P waves) have to be regarded as noise. All data processing applied later is limited in its success, not so much by the character of the signal, but by the character of the noise superimposed on the signal. Therefore an optimum method for simultaneous P‐ and S‐wave recording does not exist per se. All efforts made in the field that help to enhance the relatively weak S‐wave signal enhance the possibility of a more detailed interpretation such as polarization analysis. In the course of shear‐wave investigations over a period of more than ten years, simultaneous P‐ and SV‐wave recording has yielded fairly good results for velocity ratio determination, but has never produced satisfying results for polarization analysis because of the interfering P‐wave events. When generating pure SH‐waves, however, P‐wave arrival amplitudes in a shot record can, under favorable conditions, be kept well below the SH‐wave amplitude (−40 dB). Through additional processing, a ratio of P‐ to SH‐signal amplitude of −60 dB can be reached. The improvement achieved by making separate shear‐wave recordings, obviously, must be weighed against the additional costs caused by these recordings.
THE PARASITE PHENOMENON IN A TCAVE CANAL