A carbon nanotube structure for an EUV window with differential pumping

Studies on Water in the Hydration Chamber of a Modified Electron Microscope

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100069715 ◽

1970 ◽

Vol 28 ◽

pp. 544-545

Author(s):

R. C. Moretz ◽

G. G. Hausner ◽

D. F. Parsons

Keyword(s):

Thin Film ◽

Thin Films ◽

Electron Microscope ◽

Steady State ◽

Room Temperature ◽

Small Mass ◽

Equilibrium Pressure ◽

Biological Objects ◽

Mechanical Pump ◽

Differential Pumping

Use of the electron microscope to examine wet objects is possible due to the small mass thickness of the equilibrium pressure of water vapor at room temperature. Previous attempts to examine hydrated biological objects and water itself used a chamber consisting of two small apertures sealed by two thin films. Extensive work in our laboratory showed that such films have an 80% failure rate when wet. Using the principle of differential pumping of the microscope column, we can use open apertures in place of thin film windows.Fig. 1 shows the modified Siemens la specimen chamber with the connections to the water supply and the auxiliary pumping station. A mechanical pump is connected to the vapor supply via a 100μ aperture to maintain steady-state conditions.

Download Full-text

Residual Gas Reaction in the Electron Microscope: II The Design of a Gas-Control Chamber for Quantitative Observations

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100062324 ◽

1969 ◽

Vol 27 ◽

pp. 82-83

Author(s):

Chester J. Calbick ◽

Richard E. Hartman

Keyword(s):

Electron Beam ◽

Electron Microscope ◽

Local Environment ◽

Chamber Pressure ◽

Objective Lens ◽

Ion Pump ◽

Quantitative Studies ◽

Precise Knowledge ◽

Differential Pumping ◽

And Control

Quantitative studies of the phenomenon associated with reactions induced by the electron beam between specimens and gases present in the electron microscope require precise knowledge and control of the local environment experienced by the portion of the specimen in the electron beam. Because of outgassing phenomena, the environment at the irradiated portion of the specimen is very different from that in any place where gas pressures and compositions can be measured. We have found that differential pumping of the specimen chamber by a 4" Orb-Ion pump, following roughing by a zeolite sorption pump, can produce a specimen-chamber pressure 100- to 1000-fold less than that in the region below the objective lens.

Download Full-text