Research on measurement optical axis eccentricity and fitting method of aspheric mirror

2020 ◽  
Author(s):  
xihong fu ◽  
li shuo ◽  
xue li ◽  
kang shifa ◽  
zheng xiangke ◽  
...  
Keyword(s):  
Optical Axis ◽  
Fitting Method ◽  
Aspheric Mirror

Analysis of 3-d molecular distribution with the digital imaging microscope

1988 ◽  
Vol 46 ◽  
pp. 40-41
Author(s):  
W.A. Carrington ◽  
F.S. Fay ◽  
K.E. Fogarty ◽  
L. Lifshitz
Keyword(s):  
Image Restoration ◽  
Digital Imaging ◽  
Fluorescent Dyes ◽  
Optical Axis ◽  
Computer Hardware ◽  
Computer Algorithms ◽  
Low Contrast ◽  
Specific Proteins ◽  
Effective Use ◽  
Single Living Cells

Advances in digital imaging microscopy and in the synthesis of fluorescent dyes allow the determination of 3D distribution of specific proteins, ions, GNA or DNA in single living cells. Effective use of this technology requires a combination of optical and computer hardware and software for image restoration, feature extraction and computer graphics.The digital imaging microscope consists of a conventional epifluorescence microscope with computer controlled focus, excitation and emission wavelength and duration of excitation. Images are recorded with a cooled (-80°C) CCD. 3D images are obtained as a series of optical sections at .25 - .5 μm intervals.A conventional microscope has substantial blurring along its optical axis. Out of focus contributions to a single optical section cause low contrast and flare; details are poorly resolved along the optical axis. We have developed new computer algorithms for reversing these distortions. These image restoration techniques and scanning confocal microscopes yield significantly better images; the results from the two are comparable.

Field Distribution of Strongly Excited Magnetic Lenses

1975 ◽  
Vol 33 ◽  
pp. 140-141
Author(s):  
M. Strojnik
Keyword(s):  
Flux Density ◽  
Field Distribution ◽  
Optical Axis ◽  
Operating Point ◽  
Pole Piece ◽  
Partial Saturation ◽  
Axial Flux ◽  
The Stability

Magnetic lenses operating in partial saturation offer two advantages in HVEM: they exhibit small cs and cc and their power depends little on the excitation IN. Curve H, Fig. 1, shows that the maximal axial flux density Bz max of one of the lenses investigated changes between points (3) and (4) by 5% as the excitation varies by 40%. Consequently, the designer can relax the requirements concerning the stability of the lens current supplies. Saturated lenses, however, can only be used if (i) unwanted fields along the optical axis can be controlled, (ii) 'wobbling' of the optical axis due to inhomogeneous saturation around the pole piece faces is prevented, (iii) ample ampere-turns can be squeezed into the space available, and (iv) the lens operating point covers a sufficient range of accelerating voltages.

Using A Segmented Voltage Sweep Mode and A Gaussian Curve Fitting Method to Improve Heavy Metal Measurement System Performance

2012 ◽  
Vol 19 (2) ◽  
pp. 381-394
Author(s):  
José Pereira ◽  
Octavian Postolache ◽  
Pedro Girão
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Measurement System ◽  
Curve Fitting ◽  
System Performance ◽  
Redox Potentials ◽  
Voltage Sweep ◽  
Gaussian Curve ◽  
Fitting Method ◽  
Curve Fitting Method

Using A Segmented Voltage Sweep Mode and A Gaussian Curve Fitting Method to Improve Heavy Metal Measurement System PerformanceThis paper presents a voltammetric segmented voltage sweep mode that can be used to identify and measure heavy metals' concentrations. The proposed sweep mode covers a set of voltage ranges that are centered around the redox potentials of the metals that are under analysis. The heavy metal measurement system can take advantage of the historical database of measurements to identify the metals with higher concentrations in a given geographical area, and perform a segmented sweep around predefined voltage ranges or, alternatively, the system can perform a fast linear voltage sweep to identify the voltammetric current peaks and then perform a segmented voltage sweep around the set of voltages that are associated with the voltammetric current peaks. The paper also includes the presentation of two auto-calibration modes that can be used to improve system's reliability and proposes the usage of a Gaussian curve fitting of voltammetric data to identify heavy metals and to evaluate their concentrations. Several simulation and experimental results, that validate the theoretical expectations, are also presented in the paper.

Мобильные навигационные комплексы на отечественных суперярких светодиодах для освоения Арктики

2020 ◽  
Vol 14 (4) ◽  
pp. 338-343
Author(s):  
Д.В. Васильев ◽  
А.И. Лаврюшин
Keyword(s):  
Long Range ◽  
Optical Axis ◽  
Navigation Systems ◽  
Glide Path ◽  
Mobile Navigation ◽  
Path System

Рассмотрен потенциал возможностей светотехнических мобильных навигационных комплексов, обеспечивающих дальний привод летательных аппаратов по глиссаде. Основа комплекса – ​суперяркие монохромные светодиоды производства компании ООО «НПЦ ОЭП «ОПТЭЛ». Для сравнения характеристик светодиодов для задач навигации выбран новый параметр – ​распределение освещенности в плоскости, перпендикулярной оптической оси светодиода. Параметр влияет на массо-­габаритные и тактико-­технические характеристики проектируемых изделий. The article discusses the possibility of creating lighting mobile navigation systems that provide long-range drive of aircraft along the glide path. System base – ​monochrome LEDs of LLC SPCOD “OPTEL”. A new parameter was proposed for navigation issues – ​the distribution of illumination in a plane perpendicular to the optical axis of the LED. The parameter affects the overall dimensions and tactical and technical characteristics of the designed products.

scholarly journals Cut-Edge Detection Method for Rice Harvesting Based on Machine Vision

Agronomy ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 590
Author(s):  
Zhenqian Zhang ◽  
Ruyue Cao ◽  
Cheng Peng ◽  
Renjie Liu ◽  
Yifan Sun ◽  
...  
Keyword(s):  
Machine Vision ◽  
Edge Detection ◽  
Detection Method ◽  
Region Of Interest ◽  
Average Error ◽  
Vertical Projection ◽  
Cut Edge ◽  
Fitting Method ◽  
Combine Harvester ◽  
Edge Detection Method

A cut-edge detection method based on machine vision was developed for obtaining the navigation path of a combine harvester. First, the Cr component in the YCbCr color model was selected as the grayscale feature factor. Then, by detecting the end of the crop row, judging the target demarcation and getting the feature points, the region of interest (ROI) was automatically gained. Subsequently, the vertical projection was applied to reduce the noise. All the points in the ROI were calculated, and a dividing point was found in each row. The hierarchical clustering method was used to extract the outliers. At last, the polynomial fitting method was used to acquire the straight or curved cut-edge. The results gained from the samples showed that the average error for locating the cut-edge was 2.84 cm. The method was capable of providing support for the automatic navigation of a combine harvester.

A Useful Curve Fitting Method for Concrete Uniaxial Compressive Experiment Data

2011 ◽  
Vol 291-294 ◽  
pp. 1015-1020 ◽  
Author(s):  
Chong Jin ◽  
Hong Wang ◽  
Xiao Zhou Xia
Keyword(s):  
Experimental Data ◽  
Orthogonal Polynomial ◽  
Least Square ◽  
Base Function ◽  
Concrete Material ◽  
Fitting Method ◽  
Orthogonal Base ◽  
The Matrix ◽  
Uniform Function ◽  
Curve Fitting Method

Based on the superiority avoiding the matrix equation to be morbid for those fitting functions constructed by orthogonal base, the Legendre orthogonal polynomial is adopted to fit the experimental data of concrete uniaxial compression stress-strain curves under the frame of least-square. With the help of FORTRAN programming, 3 series of experimental data is fitted. And the fitting effect is very satisfactory when the item number of orthogonal base is not less than 5. What’s more, compared with those piecewise fitting functions, the Legendre orthogonal polynomial fitting function obtained can be introduced into the nonlinear harden-soften character of concrete constitute law more convenient because of its uniform function form and continuous derived feature. And the fitting idea by orthogonal base function will provide a widely road for studying the constitute law of concrete material.

Sign in / Sign up

Export Citation Format

Share Document