Towards a low-cost on-chip mid-IR gas sensing solution: chemical synthesis of lead-salt photonic materials

2020 ◽  
Author(s):  
Tahere Hemati ◽  
Xintong Zhang ◽  
Binbin Weng
Keyword(s):  
Chemical Synthesis ◽  
Gas Sensing ◽  
Low Cost ◽  
Lead Salt ◽  
Photonic Materials ◽  
On Chip

scholarly journals A highly stable, nanotube-enhanced, CMOS-MEMS thermal emitter for mid-IR gas sensing

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Daniel Popa ◽  
Richard Hopper ◽  
Syed Zeeshan Ali ◽  
Matthew Thomas Cole ◽  
Ye Fan ◽  
...  
Keyword(s):  
Gas Sensing ◽  
Low Cost ◽  
Complementary Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Light Sources ◽  
Mir Spectroscopy ◽  
Sensing Applications ◽  
Cmos Mems ◽  
Extended Operation ◽  
On Chip

AbstractThe gas sensor market is growing fast, driven by many socioeconomic and industrial factors. Mid-infrared (MIR) gas sensors offer excellent performance for an increasing number of sensing applications in healthcare, smart homes, and the automotive sector. Having access to low-cost, miniaturized, energy efficient light sources is of critical importance for the monolithic integration of MIR sensors. Here, we present an on-chip broadband thermal MIR source fabricated by combining a complementary metal oxide semiconductor (CMOS) micro-hotplate with a dielectric-encapsulated carbon nanotube (CNT) blackbody layer. The micro-hotplate was used during fabrication as a micro-reactor to facilitate high temperature (>700 $$^{\circ }$$ ∘ C) growth of the CNT layer and also for post-growth thermal annealing. We demonstrate, for the first time, stable extended operation in air of devices with a dielectric-encapsulated CNT layer at heater temperatures above 600 $$^{\circ }$$ ∘ C. The demonstrated devices exhibit almost unitary emissivity across the entire MIR spectrum, offering an ideal solution for low-cost, highly-integrated MIR spectroscopy for the Internet of Things.

scholarly journals A highly stable, nanotube-enhanced, CMOS-MEMS thermal emitter for mid-IR gas sensing

2021 ◽  
Author(s):  
Daniel Popa ◽  
Richard Hopper ◽  
Syed Zeeshan Ali ◽  
Matthew Cole ◽  
Ye Fan ◽  
...  
Keyword(s):  
Gas Sensing ◽  
Low Cost ◽  
Complementary Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Light Sources ◽  
Mir Spectroscopy ◽  
Sensing Applications ◽  
Cmos Mems ◽  
Extended Operation ◽  
On Chip

Abstract The gas sensor market is growing fast, driven by many socioeconomic and industrial factors. Mid-infrared (MIR) gas sensors offer excellent performance for an increasing number of sensing applications in healthcare, smart homes, and the automotive sector. Having access to low-cost, miniaturized, energy efficient light sources is of critical importance for the monolithic integration of MIR sensors. Here, we present an on-chip broadband thermal MIR source fabricated by combining a complementary metal oxide semiconductor (CMOS) micro-hotplate with a dielectric-encapsulated carbon nanotube (CNT) blackbody layer. The micro-hotplate was used during fabrication as a micro-reactor to facilitate high temperature (>700 • C) growth of the CNT layer and also for post-growth thermal annealing. We demonstrate, for the first time, stable extended operation in air of devices with a dielectric-encapsulated CNT layer at heater temperatures above 600 • C. The demonstrated devices exhibit almost unitary emissivity across the entire MIR spectrum, offering an ideal solution for low-cost, highly-integrated MIR spectroscopy for the Internet of Sensors.

scholarly journals Design and Manufacturing of a Disposable, Cyclo-Olefin Copolymer, Microfluidic Device for a Biosensor †

Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1178 ◽  
Author(s):  
Jorge Prada ◽  
Christina Cordes ◽  
Carsten Harms ◽  
Walter Lang
Keyword(s):  
Microfluidic Device ◽  
Heating Temperature ◽  
Low Cost ◽  
Reaction Chamber ◽  
Microfluidic System ◽  
Heating Process ◽  
Design And Manufacturing ◽  
On Chip ◽  
Working Parameters ◽  
Auto Fluorescence

This contribution outlines the design and manufacturing of a microfluidic device implemented as a biosensor for retrieval and detection of bacteria RNA. The device is fully made of Cyclo-Olefin Copolymer (COC), which features low auto-fluorescence, biocompatibility and manufacturability by hot-embossing. The RNA retrieval was carried on after bacteria heat-lysis by an on-chip micro-heater, whose function was characterized at different working parameters. Carbon resistive temperature sensors were tested, characterized and printed on the biochip sealing film to monitor the heating process. Off-chip and on-chip processed RNA were hybridized with capture probes on the reaction chamber surface and identification was achieved by detection of fluorescence tags. The application of the mentioned techniques and materials proved to allow the development of low-cost, disposable albeit multi-functional microfluidic system, performing heating, temperature sensing and chemical reaction processes in the same device. By proving its effectiveness, this device contributes a reference to show the integration potential of fully thermoplastic devices in biosensor systems.

scholarly journals Exploring and Exploiting the Symmetry-Breaking Effect of Cyclodextrins in Mechanomolecules

Symmetry ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1249 ◽  
Author(s):  
Bruns
Keyword(s):  
Symmetry Breaking ◽  
Chemical Synthesis ◽  
Low Cost ◽  
Molecular Machine ◽  
Advanced Materials ◽  
Breaking Effect ◽  
Planar Chirality ◽  
Conical Shape ◽  
Wide Availability ◽  
Molecular Rings

Cyclodextrins (CDs) are cone-shaped molecular rings that have been widely employed in supramolecular/host–guest chemistry because of their low cost, high biocompatibility, stability, wide availability in multiple sizes, and their promiscuity for binding a range of molecular guests in water. Consequently, CD-based host–guest complexes are often employed as templates for the synthesis of mechanically bonded molecules (mechanomolecules) such as catenanes, rotaxanes, and polyrotaxanes in particular. The conical shape and cyclodirectionality of the CD “bead” gives rise to a symmetry-breaking effect when it is threaded onto a molecular “string”; even symmetrical guests are rendered asymmetric by the presence of an encircling CD host. This review focuses on the stereochemical implications of this symmetry-breaking effect in mechanomolecules, including orientational isomerism, mechanically planar chirality, and topological chirality, as well as how they support applications in regioselective and stereoselective chemical synthesis, the design of molecular machine prototypes, and the development of advanced materials.

All-nanoparticle layer-by-layer coatings for Mid-IR on-chip gas sensing

2020 ◽  
Vol 56 (91) ◽  
pp. 14283-14286
Author(s):  
Diana Al Husseini ◽  
Junchao Zhou ◽  
Daniel Willhelm ◽  
Trevor Hastings ◽  
Gregory S. Day ◽  
...  
Keyword(s):  
Optical Waveguides ◽  
Gas Sensing ◽  
Layer By Layer ◽  
Precise Control ◽  
Nanoparticle Layer ◽  
Withdrawal Speed ◽  
Layer Deposition ◽  
Nanoparticle Coatings ◽  
On Chip

Functionalization of optical waveguides with submicron all-nanoparticle coatings significantly enhanced the detection of acetone. Such coatings were enabled via precise control of the substrate withdrawal speed using the layer-by-layer deposition.

On-Chip Micro–Electro–Mechanical System Fourier Transform Infrared (MEMS FT-IR) Spectrometer-Based Gas Sensing

2016 ◽  
Vol 70 (5) ◽  
pp. 897-904 ◽  
Author(s):  
Mazen Erfan ◽  
Yasser M Sabry ◽  
Mohammad Sakr ◽  
Bassem Mortada ◽  
Mostafa Medhat ◽  
...  
Keyword(s):  
Fourier Transform ◽  
Mechanical System ◽  
Gas Sensing ◽  
Fourier Transform Infrared ◽  
Micro Electro Mechanical System ◽  
Ft Ir ◽  
On Chip

scholarly journals On-Chip Narrowband Thermal Emitter for Mid-IR Optical Gas Sensing

ACS Photonics ◽  
2017 ◽  
Vol 4 (6) ◽  
pp. 1371-1380 ◽  
Author(s):  
Alexander Lochbaum ◽  
Yuriy Fedoryshyn ◽  
Alexander Dorodnyy ◽  
Ueli Koch ◽  
Christian Hafner ◽  
...  
Keyword(s):  
Gas Sensing ◽  
Thermal Emitter ◽  
Optical Gas Sensing ◽  
On Chip

On-Chip Fabrication of None-Dead-Volume Microtips for ESI-MS Applications

2007 ◽  
Vol 121-123 ◽  
pp. 611-614
Author(s):  
Che Hsin Lin ◽  
Jen Taie Shiea ◽  
Yen Lieng Lin
Keyword(s):  
Surface Tension ◽  
Low Cost ◽  
Microfluidic Channel ◽  
Dead Volume ◽  
Esi Ms ◽  
Rapid Fabrication ◽  
Chip Fabrication ◽  
Novel Method ◽  
On Chip ◽  
Highly Uniform

This paper proposes a novel method to on-chip fabricate a none-dead-volume microtip for ESI-MS applications. The microfluidic chip and ESI tip are fabricated in low-cost plastic based materials using a simple and rapid fabrication process. A constant-speed-pulling method is developed to fabricate the ESI tip by pulling mixed PMMA glue using a 30-μm stainless wire through the pre-formed microfluidic channel. The equilibrium of surface tension of PMMA glue will result in a sharp tip after curing. A highly uniform micro-tip can be formed directly at the outlet of the microfluidic channel with minimum dead-volume zone. Detection of caffeine, myoglobin, lysozyme and cytochrome C biosamples confirms the microchip device can be used for high resolution ESI-MS applications.

Optical MEMS platform for low-cost on-chip integration of planar light circuits and optical switching

2004 ◽  
Author(s):  
Kristine A. German ◽  
Joel Kubby ◽  
Jingkuang Chen ◽  
James Diehl ◽  
Kathleen Feinberg ◽  
...  
Keyword(s):  
Optical Switching ◽  
Low Cost ◽  
Optical Mems ◽  
On Chip
Sign in / Sign up

Export Citation Format

Share Document