A self-temperature compensation method of fiber optic gage use for strain balances

2019 ◽  
Author(s):  
Fu Min ◽  
Huacheng Qiu ◽  
Yanguang Yang ◽  
Zhendong Xie ◽  
Zengling Ran
Keyword(s):  
Temperature Compensation ◽  
Fiber Optic ◽  
Compensation Method

Investigation on Temperature Compensation of Fiber Bragg Grating Sensors for Hull Monitoring

2018 ◽  
Author(s):  
Ruiqi Ma ◽  
Guoqing Feng ◽  
Huilong Ren ◽  
Peng Fu ◽  
Shuang Wu ◽  
...  
Keyword(s):  
Thermal Expansion ◽  
Fiber Bragg Grating ◽  
Temperature Compensation ◽  
Compensation Method ◽  
Bragg Grating ◽  
Theoretical Derivation ◽  
Temperature Changes ◽  
Hull Girder ◽  
Fbg Sensor ◽  
Fbg Sensors

Hull monitoring system with Fiber Bragg Grating (FBG) sensors increasingly receives people’s attentions. However, for the ship hull monitoring, the deformation of hull girder changes a lot as is subjected to a huge temperature variation. Therefore, the compensation method with only FBG temperature self-correction is not suitable for the hull monitoring sensors because no material thermal expansion effects are reasonably included. In this paper, the new compensation method of hull monitoring FBG sensor based on the sensor theory with both FBG temperature self-correction and steel thermal expansion effects correction is studied. The coupled compensation method suitable for hull monitoring sensor is obtained by theoretical derivation. As the comparison, the coupled compensation experiment was carried out. The results show that the relative error under the temperature compensation method is large in the case of drastic strain and temperature changes, and the correction results of the tested method will be closer to the true level.

scholarly journals Temperature Compensation Method for Digital Cameras in 2D and 3D Measurement Applications

Sensors ◽  
2018 ◽  
Vol 18 (11) ◽  
pp. 3685 ◽  
Author(s):  
Marcin Adamczyk ◽  
Paweł Liberadzki ◽  
Robert Sitnik
Keyword(s):  
Temperature Compensation ◽  
Three Dimensional ◽  
Compensation Method ◽  
Effect Of Temperature ◽  
Calibration Model ◽  
Digital Cameras ◽  
Compensation Model ◽  
Camera Design ◽  
Compensation Approach ◽  
2D And 3D

This paper presents the results of several studies concerning the effect of temperature on digital cameras. Experiments were performed using three different camera models. The presented results conclusively demonstrate that the typical camera design does not adequately take into account the effect of temperature variation on the device’s performance. In this regard, a modified camera design is proposed that exhibits a highly predictable behavior under varying ambient temperature and facilitates thermal compensation. A novel temperature compensation method is also proposed. This compensation model can be applied in almost every existing camera application, as it is compatible with every camera calibration model. A two-dimensional (2D) and three-dimensional (3D) application of the proposed compensation model is also described. The results of the application of the proposed compensation approach are presented herein.

Interferometric Fiber-Optic Electric Current Sensor for Industrial Application

2010 ◽  
Vol 437 ◽  
pp. 314-318 ◽  
Author(s):  
Nikolay I. Starostin ◽  
Maksim V. Ryabko ◽  
Yurii K. Chamorovskii ◽  
Vladimir P. Gubin ◽  
Aleksandr I. Sazonov ◽  
...  
Keyword(s):  
Electric Current ◽  
Industrial Application ◽  
Temperature Compensation ◽  
Fiber Optic ◽  
Fiber Optic Sensor ◽  
Current Sensor ◽  
Sensor Output ◽  
Optic Sensor ◽  
Spun Fiber ◽  
Fiber Coil

The interferometric electric current fiber-optic sensor for application in industry is presented. The modified spun fiber is used for sensitive fiber coil of sensor. The sensor has accuracy of 0.5% at temperature range from -40°C to 60°C without necessity of additional temperature compensation. The range of measured current is 15 – 250 kA. A frequency band is 0 – 5000 Hz and a nonlinearity of a sensor output is ±0.15%.

scholarly journals Research on Temperature Compensation Method in Crankshaft Online Measurement System

2021 ◽  
Vol 11 (16) ◽  
pp. 7558
Author(s):  
Tingting Gu ◽  
Xiaoming Qian ◽  
Peihuang Lou
Keyword(s):  
Ambient Temperature ◽  
Measurement System ◽  
Temperature Compensation ◽  
Compensation Method ◽  
Displacement Sensor ◽  
Online Measurement ◽  
High Precision Measurement ◽  
Temperature Changes ◽  
Dragonfly Algorithm ◽  
Measuring Machine

The crankshaft online measurement system has realized the full inspection function with fast beats, at the same time it requires for high-precision measurement. Considering the effect of ambient temperature and temperature changes on measuring machine, the calibration part, the measured crankshaft and displacement sensor, a temperature compensation method is proposed. Firstly, relationship between calibration part and ambient temperature can be get through the zero calibration. Then use the material properties to obtain compensation values of the calibration part and the measured crankshaft part at different temperatures. Finally, the compensation parameters for displacement sensor can be obtained through the BP algorithm. The improved dragonfly algorithm (DA) is used to optimize the parameters of BP neural network algorithm. Experiments verify the effectiveness of IDA-BP for LVDT in temperature compensation. After temperature compensation, the error range of main journal radius is reduced from 0.0156 mm to 0.0028 mm, the residual error decreased from −0.0282 mm~+0.0018 mm to −0.0058 mm~−0.0008 mm. The influence of temperature changes on the measurement is reduced and measurement accuracy is improved through the temperature compensation method. The effectiveness of the method is proved.

Sign in / Sign up

Export Citation Format

Share Document