High-rate telemetry as a novel approach to opening new vistas of high-energy space astrophysics

1996 ◽  
Author(s):  
David Grabelsky ◽  
Steven M. Matz ◽  
William R. Purcell ◽  
Melville P. Ulmer ◽  
John P. Finley ◽  
...  
Keyword(s):  
High Energy ◽  
Energy Space ◽  
High Rate ◽  
Novel Approach

scholarly journals Unimodular vs nilpotent superfield approach to pure dS supergravity

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Sukruti Bansal ◽  
Silvia Nagy ◽  
Antonio Padilla ◽  
Ivonne Zavala
Keyword(s):  
String Theory ◽  
General Framework ◽  
Recent Progress ◽  
High Energy ◽  
De Sitter Spacetime ◽  
De Sitter ◽  
New Approach ◽  
Sitter Spacetime ◽  
Novel Approach ◽  
De Sitter Vacua

Abstract Recent progress in understanding de Sitter spacetime in supergravity and string theory has led to the development of a four dimensional supergravity with spontaneously broken supersymmetry allowing for de Sitter vacua, also called de Sitter supergravity. One approach makes use of constrained (nilpotent) superfields, while an alternative one couples supergravity to a locally supersymmetric generalization of the Volkov-Akulov goldstino action. These two approaches have been shown to give rise to the same 4D action. A novel approach to de Sitter vacua in supergravity involves the generalisation of unimodular gravity to supergravity using a super-Stückelberg mechanism. In this paper, we make a connection between this new approach and the previous two which are in the context of nilpotent superfields and the goldstino brane. We show that upon appropriate field redefinitions, the 4D actions match up to the cubic order in the fields. This points at the possible existence of a more general framework to obtain de Sitter spacetimes from high-energy theories.

scholarly journals In-Situ Annealed Ti3C2Tx MXene Based All-Solid-State Flexible Zn-Ion Hybrid Micro Supercapacitor Array with Enhanced Stability

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
La Li ◽  
Weijia Liu ◽  
Kai Jiang ◽  
Di Chen ◽  
Fengyu Qu ◽  
...  
Keyword(s):  
High Energy ◽  
High Rate ◽  
High Energy Density ◽  
Electrochemical Performances ◽  
Integrated Electronics ◽  
Long Term Stability ◽  
Hybrid Supercapacitors ◽  
Portable Electronics

AbstractZn-ion hybrid supercapacitors (SCs) are considered as promising energy storage owing to their high energy density compared to traditional SCs. How to realize the miniaturization, patterning, and flexibility of the Zn-ion SCs without affecting the electrochemical performances has special meanings for expanding their applications in wearable integrated electronics. Ti3C2Tx cathode with outstanding conductivity, unique lamellar structure and good mechanical flexibility has been demonstrated tremendous potential in the design of Zn-ion SCs, but achieving long cycling stability and high rate stability is still big challenges. Here, we proposed a facile laser writing approach to fabricate patterned Ti3C2Tx-based Zn-ion micro-supercapacitors (MSCs), followed by the in-situ anneal treatment of the assembled MSCs to improve the long-term stability, which exhibits 80% of the capacitance retention even after 50,000 charge/discharge cycles and superior rate stability. The influence of the cathode thickness on the electrochemical performance of the MSCs is also studied. When the thickness reaches 0.851 µm the maximum areal capacitance of 72.02 mF cm−2 at scan rate of 10 mV s−1, which is 1.77 times higher than that with a thickness of 0.329 µm (35.6 mF cm−2). Moreover, the fabricated Ti3C2Tx based Zn-ion MSCs have excellent flexibility, a digital timer can be driven by the single device even under bending state, a flexible LED displayer of “TiC” logo also can be easily lighted by the MSC arrays under twisting, crimping, and winding conditions, demonstrating the scalable fabrication and application of the fabricated MSCs in portable electronics.

scholarly journals Oxygen-Deficient β-MnO2@Graphene Oxide Cathode for High-Rate and Long-Life Aqueous Zinc Ion Batteries

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Shouxiang Ding ◽  
Mingzheng Zhang ◽  
Runzhi Qin ◽  
Jianjun Fang ◽  
Hengyu Ren ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Manganese Oxides ◽  
Rate Capability ◽  
High Energy ◽  
Zinc Ion ◽  
Cycling Stability ◽  
High Rate ◽  
High Energy Density ◽  
Superior Performance ◽  
Long Life

AbstractRecent years have witnessed a booming interest in grid-scale electrochemical energy storage, where much attention has been paid to the aqueous zinc ion batteries (AZIBs). Among various cathode materials for AZIBs, manganese oxides have risen to prominence due to their high energy density and low cost. However, sluggish reaction kinetics and poor cycling stability dictate against their practical application. Herein, we demonstrate the combined use of defect engineering and interfacial optimization that can simultaneously promote rate capability and cycling stability of MnO2 cathodes. β-MnO2 with abundant oxygen vacancies (VO) and graphene oxide (GO) wrapping is synthesized, in which VO in the bulk accelerate the charge/discharge kinetics while GO on the surfaces inhibits the Mn dissolution. This electrode shows a sustained reversible capacity of ~ 129.6 mAh g−1 even after 2000 cycles at a current rate of 4C, outperforming the state-of-the-art MnO2-based cathodes. The superior performance can be rationalized by the direct interaction between surface VO and the GO coating layer, as well as the regulation of structural evolution of β-MnO2 during cycling. The combinatorial design scheme in this work offers a practical pathway for obtaining high-rate and long-life cathodes for AZIBs.

Oxygen Supply Method Using Gas-Permeable Film for Wastewater Treatment

1993 ◽  
Vol 28 (7) ◽  
pp. 243-250 ◽  
Author(s):  
Y. Suzuki ◽  
S. Miyahara ◽  
K. Takeishi
Keyword(s):  
Wastewater Treatment ◽  
Energy Consumption ◽  
Oxygen Transfer ◽  
Transfer Rate ◽  
Oxygen Supply ◽  
Oxygen Transfer Rate ◽  
High Energy ◽  
High Rate ◽  
N Removal ◽  
High Energy Consumption

Gas-permeable film can separate air and water, and at the same time, let oxygen diffuse from the air to the water through the film. An oxygen supply method using this film was investigated for the purpose of reducing energy consumption for wastewater treatment. The oxygen transfer rate was measured for the cases with or without biofilm, which proved the high rate of oxygen transfer in the case with nitrifying biofilm which performed nitrification. When the Gas-permeable film with nitrifying biofilm was applied to the treatment of wastewater, denitrifying biofilm formed on the nitrifying biofilm, and simultaneous nitrification and denitrification occurred, resulting in the high rate of organic matter and T-N removal (7 gTOC/m2/d and 4 gT-N/m2/d, respectively). However, periodic sloughing of the denitrifying biofilm was needed to keep the oxygen transfer rate high. Energy consumption of the process using the film in the form of tubes was estimated to be less than 40% of that of the activated sludge process.

scholarly journals Design of Short, High-Rate DVB-S2-Like Semi-Regular LDPC Codes

2008 ◽  
Vol 2008 ◽  
pp. 1-4
Author(s):  
Luca Barletta ◽  
Arnaldo Spalvieri
Keyword(s):  
Coded Modulation ◽  
High Rate ◽  
Parity Check ◽  
Code Length ◽  
Carrier Recovery ◽  
Low Density Parity Check ◽  
Novel Approach ◽  
Parity Check Codes ◽  
Moderate Length

This work focuses on high-rate () moderate-length () low-density parity-check codes. High-rate codes allow to maintain good quality of the preliminary decisions that are used in carrier recovery, while a moderate code length allows to keep the latency low. The interleaver of the LDPC matrix that we consider is inspired to the DVB-S2 standard one. A novel approach for avoiding short cycles is analyzed. A modified BP decoding algorithm is applied in order to deal with longer cycles. Simulations and results for the AWGN channel are presented, both for BPSK signalling and for coded modulation based on the partition .

scholarly journals Multiscale Copper-µDiamond Nanostructured Composites

2012 ◽  
Vol 730-732 ◽  
pp. 925-930
Author(s):  
Daniela Nunes ◽  
Vanessa Livramento ◽  
Horácio Fernandes ◽  
Carlos Silva ◽  
Nobumitsu Shohoji ◽  
...  
Keyword(s):  
Pure Copper ◽  
Thermal Stabilization ◽  
Hot Extrusion ◽  
Processing Parameters ◽  
High Energy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Optimal Processing ◽  
Novel Approach ◽  
Transmission Electron

Nanostructured copper-diamond composites can be tailored for thermal management applications at high temperature. A novel approach based on multiscale diamond dispersions is proposed for the production of this type of materials: a Cu-nDiamond composite produced by high-energy milling is used as a nanostructured matrix for further dispersion of micrometer sized diamond. The former offers strength and microstructural thermal stability while the latter provides high thermal conductivity. A series of Cu-nDiamond mixtures have been milled to define the minimum nanodiamond fraction suitable for matrix refinement and thermal stabilization. A refined matrix with homogenously dispersed nanoparticles could be obtained with 4 at.% nanodiamond for posterior mixture with mDiamond and subsequent consolidation. In order to define optimal processing parameters, consolidation by hot extrusion has been carried out for a Cu-nDiamond composite and, in parallel, for a mixture of pure copper and mDiamond. The materials produced were characterized by X-ray diffraction, scanning and transmission electron microscopy and microhardness measurements.

scholarly journals Understanding the Role of π-Conjugated Polymers as Binders in Enabling Designs for High-Energy/High-Rate Lithium Metal Batteries

2021 ◽  
Author(s):  
Rodrigo Elizalde-Segovia ◽  
Pratyusha Das ◽  
Billal Zayat ◽  
AHAMED IRSHAD ◽  
Barry Thompson ◽  
...  
Keyword(s):  
Conjugated Polymers ◽  
High Energy ◽  
High Rate ◽  
Lithium Metal ◽  
Lithium Metal Batteries

scholarly journals Evaluation of results of three and four-part fracture dislocations of proximal humerus in young adults using philos (proximal humerus internal locking system)

2018 ◽  
Vol 6 (2) ◽  
pp. 585
Author(s):  
Amit Thakur ◽  
Khalid Muzzafar ◽  
Sumeet Singh Charak ◽  
Bias Dev ◽  
Abdul Ghani
Keyword(s):  
Proximal Humerus ◽  
Young Patients ◽  
Soft Tissue Injuries ◽  
Functional Results ◽  
High Energy ◽  
High Rate ◽  
Fracture Dislocation ◽  
Rotator Cuff Insufficiency ◽  
Fracture Dislocations ◽  
Adequate Management

Background: The fractures of proximal humerus constitute about 5% of fractures in adults third in number to fracture colles and hip usually in elderly patients due to a low energy trauma. In young patients the fractures are mostly due to high energy trauma and as such are associate with other soft tissue injuries. A sub group of young patients have a three or four fracture dislocation of shoulder joint. The aim of this study was to find the results of fixation by PHILOS in these young patients.Methods: This study was done in a teritiary referral centre over a period of about 1 year. All patients were operated within three weeks. Open fractures, patients with age more than 50 years were excluded from the study. All patients underwent open reduction and fixation using commercially available PHILOS. A minimum of 6 months follows up was essential for inclusion into the study. Final functional results were evaluated by Constant Murley scoring.Results: 14 patients were included in the study. The average age of patients was 38.42years. All fractures united. We had 71.4% excellent or good results. The complications noted were shoulder stiffness in 3, inadequate post op reduction, rotator cuff insufficiency, head necrosis, secondary osteo arthritis 1 each.Conclusions: Despite the relatively high rate of complications encountered in the management of these complicated high-energy fractures, the PHILOS plating system could be considered an adequate management of these patients.

Sign in / Sign up

Export Citation Format

Share Document