Matched filter applied to discriminate particles with different sizes in biological flows

2019 ◽  
Author(s):  
Marina Gómez Climente ◽  
Julia Lobera Salazar ◽  
Virginia Palero-Díaz ◽  
M. Pilar Arroyo de Grandes
Keyword(s):  
Matched Filter ◽  
Biological Flows

Object Detection Using an Ideal Observer Model

2020 ◽  
Vol 2020 (16) ◽  
pp. 41-1-41-7
Author(s):  
Orit Skorka ◽  
Paul J. Kane
Keyword(s):  
Object Detection ◽  
Matched Filter ◽  
Image Sensors ◽  
Ideal Observer ◽  
Noise Power ◽  
Relative Evaluation ◽  
Detection And Identification ◽  
Cross Correlation Analysis ◽  
Observer Model ◽  
The Ideal

Many of the metrics developed for informational imaging are useful in automotive imaging, since many of the tasks – for example, object detection and identification – are similar. This work discusses sensor characterization parameters for the Ideal Observer SNR model, and elaborates on the noise power spectrum. It presents cross-correlation analysis results for matched-filter detection of a tribar pattern in sets of resolution target images that were captured with three image sensors over a range of illumination levels. Lastly, the work compares the crosscorrelation data to predictions made by the Ideal Observer Model and demonstrates good agreement between the two methods on relative evaluation of detection capabilities.

Digital Tapped Delay Lines for HWIL Testing of Matched Filter Radar Receivers

2009 ◽  
Author(s):  
Richard F. Olson ◽  
William J. Braselton ◽  
Richard D. Mohlere
Keyword(s):  
Matched Filter ◽  
Delay Lines ◽  
Tapped Delay Lines

Matched Filter Processor for Detection and Discrimination of Unexploded Ordnance

2003 ◽  
Author(s):  
Jeffrey Marqusee ◽  
George Robitaille ◽  
Thomas Bell
Keyword(s):  
Matched Filter ◽  
Unexploded Ordnance

scholarly journals Cloud Detection Based on High Resolution Stereo Pairs of the Geostationary Meteosat Images

2020 ◽  
Vol 12 (3) ◽  
pp. 371 ◽  
Author(s):  
Sahar Dehnavi ◽  
Yasser Maghsoudi ◽  
Klemen Zakšek ◽  
Mohammad Javad Valadan Zoej ◽  
Gunther Seckmeyer ◽  
...  
Keyword(s):  
High Resolution ◽  
Matched Filter ◽  
Stereo Pair ◽  
Cloud Detection ◽  
Operating Characteristics ◽  
Detection Techniques ◽  
Infrared Imager ◽  
Detection Approach ◽  
Considerable Impact ◽  
Image Pairs

Due to the considerable impact of clouds on the energy balance in the atmosphere and on the earth surface, they are of great importance for various applications in meteorology or remote sensing. An important aspect of the cloud research studies is the detection of cloudy pixels from the processing of satellite images. In this research, we investigated a stereographic method on a new set of Meteosat images, namely the combination of the high resolution visible (HRV) channel of the Meteosat-8 Indian Ocean Data Coverage (IODC) as a stereo pair with the HRV channel of the Meteosat Second Generation (MSG) Meteosat-10 image at 0° E. In addition, an approach based on the outputs from stereo analysis was proposed to detect cloudy pixels. This approach is introduced with a 2D-scatterplot based on the parallax value and the minimum intersection distance. The mentioned scatterplot was applied to determine/detect cloudy pixels in various image subsets with different amounts of cloud cover. Apart from the general advantage of the applied stereography method, which only depends on geometric relationships, the cloud detection results are also improved because: (1) The stereo pair is the HRV bands of the Spinning Enhanced Visible and InfraRed Imager (SEVIRI) sensor, with the highest spatial resolution available from the Meteosat geostationary platform; and (2) the time difference between the image pairs is nearly 5 s, which improves the matching results and also decreases the effect of cloud movements. In order to prove this improvement, the results of this stereo-based approach were compared with three different reflectance-based target detection techniques, including the adaptive coherent estimator (ACE), constrained energy minimization (CEM), and matched filter (MF). The comparison of the receiver operating characteristics (ROC) detection curves and the area under these curves (AUC) showed better detection results with the proposed method. The AUC value was 0.79, 0.90, 0.90, and 0.93 respectively for ACE, CEM, MF, and the proposed stereo-based detection approach. The results of this research shall enable a more realistic modelling of down-welling solar irradiance in the future.

scholarly journals Unsupervised Identification of Targeted Spectra Applying Rank1-NMF and FCC Algorithms in Long-Wave Hyperspectral Infrared Imagery

2021 ◽  
Vol 13 (11) ◽  
pp. 2125
Author(s):  
Bardia Yousefi ◽  
Clemente Ibarra-Castanedo ◽  
Martin Chamberland ◽  
Xavier P. V. Maldague ◽  
Georges Beaudoin
Keyword(s):  
Matched Filter ◽  
Principal Component ◽  
Hyperspectral Data ◽  
Clustering Methods ◽  
Spectral Angle Mapper ◽  
Long Wave ◽  
Clustering Approach ◽  
Spectral Comparison ◽  
Computational Simplicity ◽  
Mineral Identification

Clustering methods unequivocally show considerable influence on many recent algorithms and play an important role in hyperspectral data analysis. Here, we challenge the clustering for mineral identification using two different strategies in hyperspectral long wave infrared (LWIR, 7.7–11.8 μm). For that, we compare two algorithms to perform the mineral identification in a unique dataset. The first algorithm uses spectral comparison techniques for all the pixel-spectra and creates RGB false color composites (FCC). Then, a color based clustering is used to group the regions (called FCC-clustering). The second algorithm clusters all the pixel-spectra to directly group the spectra. Then, the first rank of non-negative matrix factorization (NMF) extracts the representative of each cluster and compares results with the spectral library of JPL/NASA. These techniques give the comparison values as features which convert into RGB-FCC as the results (called clustering rank1-NMF). We applied K-means as clustering approach, which can be modified in any other similar clustering approach. The results of the clustering-rank1-NMF algorithm indicate significant computational efficiency (more than 20 times faster than the previous approach) and promising performance for mineral identification having up to 75.8% and 84.8% average accuracies for FCC-clustering and clustering-rank1 NMF algorithms (using spectral angle mapper (SAM)), respectively. Furthermore, several spectral comparison techniques are used also such as adaptive matched subspace detector (AMSD), orthogonal subspace projection (OSP) algorithm, principal component analysis (PCA), local matched filter (PLMF), SAM, and normalized cross correlation (NCC) for both algorithms and most of them show a similar range in accuracy. However, SAM and NCC are preferred due to their computational simplicity. Our algorithms strive to identify eleven different mineral grains (biotite, diopside, epidote, goethite, kyanite, scheelite, smithsonite, tourmaline, pyrope, olivine, and quartz).

scholarly journals High Accuracy Heartbeat Detection from CW-Doppler Radar Using Singular Value Decomposition and Matched Filter

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3588
Author(s):  
Yuki Iwata ◽  
Han Trong Thanh ◽  
Guanghao Sun ◽  
Koichiro Ishibashi
Keyword(s):  
Heart Rate ◽  
Singular Value Decomposition ◽  
Continuous Wave ◽  
Doppler Radar ◽  
Matched Filter ◽  
Singular Value ◽  
Home Healthcare ◽  
Body Motion ◽  
Sitting Posture ◽  
Value Decomposition

Heart rate measurement using a continuous wave Doppler radar sensor (CW-DRS) has been applied to cases where non-contact detection is required, such as the monitoring of vital signs in home healthcare. However, as a CW-DRS measures the speed of movement of the chest surface, which comprises cardiac and respiratory signals by body motion, extracting cardiac information from the superimposed signal is difficult. Therefore, it is challenging to extract cardiac information from superimposed signals. Herein, we propose a novel method based on a matched filter to solve this problem. The method comprises two processes: adaptive generation of a template via singular value decomposition of a trajectory matrix formed from the measurement signals, and reconstruction by convolution of the generated template and measurement signals. The method is validated using a dataset obtained in two different experiments, i.e., experiments involving supine and seated subject postures. Absolute errors in heart rate and standard deviation of heartbeat interval with references were calculated as 1.93±1.76bpm and 57.0±28.1s for the lying posture, and 9.72±7.86bpm and 81.3±24.3s for the sitting posture.

Sign in / Sign up

Export Citation Format

Share Document