Experimental results of using the impedance matching material to increase the bandwith of antenna transmitter

2018 ◽  
Author(s):  
Konstantin N. Klimov ◽  
Andrey M. Belevtsev ◽  
Andrey S. Godin ◽  
Anton S. Boldyreff ◽  
Irina K. Epaneshnikova ◽  
...  
Keyword(s):  
Impedance Matching ◽  
Experimental Results

A wideband right-angle transition between thin substrate integrated waveguide and rectangular waveguide based on multi-section structure

2015 ◽  
Vol 8 (2) ◽  
pp. 185-191 ◽  
Author(s):  
Teng Li ◽  
Wenbin Dou
Keyword(s):  
Insertion Loss ◽  
Rectangular Waveguide ◽  
Return Loss ◽  
Impedance Matching ◽  
Experimental Results ◽  
Center Frequency ◽  
Substrate Integrated Waveguide ◽  
Rectangular Aperture ◽  
Section Structure ◽  
Better Than

In this paper, a novel wideband right-angle transition between thin substrate integrated waveguide (SIW) and rectangular waveguide (RWG) based on multi-section structure operating at center frequency 31.5 GHz is presented. A multi-section SIW with a rectangular aperture etched on the broad wall and two stepped ridges embedded in the RWG flange are introduced to obtain a wide impedance matching. The simulations show that the bandwidth with return loss better than 20 dB is about 17 GHz. In order to verify our designs, two back-to-back transitions with different lengths are fabricated and measured. The experimental results agree well with simulations. The proposed component shows an insertion loss less than 0.44 dB and a return loss better than 14.5 dB over 12.15 GH, which corresponds to 38.57% bandwidth.

scholarly journals A Ka-Band Circular Polarized Waveguide Slot Antenna with a Cross Iris

2020 ◽  
Vol 10 (19) ◽  
pp. 6994
Author(s):  
Sung-Joon Yoon ◽  
Jae-Hoon Choi
Keyword(s):  
Reflection Coefficient ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Experimental Results ◽  
Slot Antenna ◽  
Ka Band ◽  
Circularly Polarized ◽  
Waveguide Slot ◽  
Waveguide Slot Antenna

A Ka-band circularly polarized (CP) waveguide slot antenna with a cross iris is proposed. To achieve the CP characteristic (LHCP) in the antenna, a hexagonal shaped cavity is used. The impedance matching is improved by adjusting the sizes of the hexagonal cavity and a rectangular matching cavity. To enhance the axial ratio bandwidth, a cross iris is used with two arms of different lengths. From experimental results, the proposed antenna has a 3 dB axial ratio bandwidth of 6810 MHz (31.72 GHz–38.53 GHz). The −10 dB reflection coefficient bandwidth of the proposed antenna ranges from 31.51 GHz to 39.21 GHz (7700 MHz).

scholarly journals Full Embroidery Designed Electro-Textile Wearable Tag Antenna for WBAN Application

Sensors ◽  
2019 ◽  
Vol 19 (11) ◽  
pp. 2470 ◽  
Author(s):  
Bahaa Abbas ◽  
Salam K. Khamas ◽  
Alyani Ismail ◽  
Aduwati Sali
Keyword(s):  
Close Agreement ◽  
Impedance Matching ◽  
Experimental Results ◽  
Textile Antenna

A flexible and totally wearable textile antenna is proposed by embroidering the conductive threads into garments. A purely polyester substrate has been utilized, which provides a tag that can be easily integrated with the clothes. The proposed tag antenna is small with dimensions of 72 × 20 × 2.75 mm3 and offers an enhanced performance in terms of gain and stability when worn on different body locations. Experimental results demonstrate an improved impedance matching owing to the elasticity of the E-shaped inductive feeder. Close agreement has been achieved between the simulated and measured results.

scholarly journals A Multiband Monopole Antenna with the Inverted-Trapezoidal CPW Feeding

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Quanqi Zhang ◽  
Yuanxin Li ◽  
Zhixi Liang ◽  
Hong-Zhou Tan ◽  
Yunliang Long
Keyword(s):  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Monopole Antenna ◽  
Experimental Results ◽  
Planar Structure ◽  
Antenna Gain ◽  
China Telecom ◽  
China Unicom ◽  
Multi Band

A multi-band monopole antenna with the improved inverted-trapezoidal coplanar waveguide (CPW) feeding is presented. The antenna has a simple planar structure, and occupies an area of 15 mm × 50 mm. The proposed antenna consists of an improved inverted-trapezoidal CPW-fed patch, and a series of monopole strips with different length. This monopole antenna utilizes the advantages of the CPW feeding to simplify the structure of the antenna into a single metallic level and achieve high antenna gain. The improved inverted-trapezoidal CPW-fed patch and a meander shorting strip lead to a better impedance matching result and multi-band operation. The experimental results of the proposed antenna are shown and discussed. The antenna generates two wide bands centered at about 900 and 2200 MHz to cover the GSM850/GSM900/DCS/PCS/UMTS/LTE2300/2500 bands and the 2.4 GHz WLAN operation. Meanwhile the antenna covers the 4 G bands of China Telecom (2370–2390 MHz/2635–2655 MHz), China Unicom (2300–2320 MHz/2555–2575 MHz) and China Mobile (1880–1900 MHz/2320–2370 MHz/2575–2635 MHz), too.

scholarly journals Performance Analysis of Electromechanical Tuner for Broadband Application

2020 ◽  
Vol 9 (9) ◽  
pp. 11-13
Keyword(s):  
Performance Analysis ◽  
Communication Systems ◽  
Impedance Matching ◽  
Cost Effective ◽  
Experimental Results ◽  
Rf Power ◽  
Power Devices ◽  
Passive Components ◽  
Sensor Application ◽  
Set Up

The greatest challenges to RF power devices are to match impedance for coupled network. Many causes for improper impedance results in cable loss, reflection losses and hence reduce the performance of existing system. An Impedance tuner is designed for testing prior to final set up to get satisfactory output with saving time. In modern communication systems many technologies are adding relay coils and other compensating passive components. In this paper, an impedance matching tuner is designed for multiband application with compact and cost effective structure. The characteristics of fabricated tuner is designed for 50 ohm matching two port network .The designed Electro mechanical tuner is manually characterised on the basis of experimental results to validate the system. The results suggest that it works for multiband sub GHz, Bluetooth sensor application.

Diagnostics of Gold Laser Plasmas

1988 ◽  
Vol 102 ◽  
pp. 357-360
Author(s):  
J.C. Gauthier ◽  
J.P. Geindre ◽  
P. Monier ◽  
C. Chenais-Popovics ◽  
N. Tragin ◽  
...  
Keyword(s):  
Experimental Results ◽  
Pure Gold ◽  
Electronic Temperature ◽  
X Ray ◽  
Laser Plasmas ◽  
Collisional Radiative Model ◽  
Radiative Model

AbstractIn order to achieve a nickel-like X ray laser scheme we need a tool to determine the parameters which characterise the high-Z plasma. The aim of this work is to study gold laser plasmas and to compare experimental results to a collisional-radiative model which describes nickel-like ions. The electronic temperature and density are measured by the emission of an aluminium tracer. They are compared to the predictions of the nickel-like model for pure gold. The results show that the density and temperature can be estimated in a pure gold plasma.

Observation of Phase Contrast Images in STEM and CTEM Modes by Using 100 kV Field Emission Electron Gun

1974 ◽  
Vol 32 ◽  
pp. 390-391
Author(s):  
Y. Harada ◽  
T. Goto ◽  
H. Koike ◽  
T. Someya
Keyword(s):  
Field Emission ◽  
Phase Contrast ◽  
Image Formation ◽  
Fresnel Diffraction ◽  
Experimental Results ◽  
Electron Gun ◽  
Scanning Microscopy ◽  
Emission Electron ◽  
Lattice Images

Since phase contrasts of STEM images, that is, Fresnel diffraction fringes or lattice images, manifest themselves in field emission scanning microscopy, the mechanism for image formation in the STEM mode has been investigated and compared with that in CTEM mode, resulting in the theory of reciprocity. It reveals that contrast in STEM images exhibits the same properties as contrast in CTEM images. However, it appears that the validity of the reciprocity theory, especially on the details of phase contrast, has not yet been fully proven by the experiments. In this work, we shall investigate the phase contrast images obtained in both the STEM and CTEM modes of a field emission microscope (100kV), and evaluate the validity of the reciprocity theory by comparing the experimental results.

A new dissociation mode for dislocations in silicon

1978 ◽  
Vol 36 (1) ◽  
pp. 346-347
Author(s):  
A. Ourmazd ◽  
G.R. Booker ◽  
C.J. Humphreys
Keyword(s):  
Detailed Examination ◽  
Experimental Results ◽  
Dislocation Network ◽  
Weak Beam ◽  
Phosphorus Doped

A (111) phosphorus-doped Si specimen, thinned to give a TEM foil of thickness ∼ 150nm, contained a dislocation network lying on the (111) plane. The dislocation lines were along the three <211> directions and their total Burgers vectors,ḇt, were of the type , each dislocation being of edge character. TEM examination under proper weak-beam conditions seemed initially to show the standard contrast behaviour for such dislocations, indicating some dislocation segments were undissociated (contrast A), while other segments were dissociated to give two Shockley partials separated by approximately 6nm (contrast B) . A more detailed examination, however, revealed that some segments exhibited a third and anomalous contrast behaviour (contrast C), interpreted here as being due to a new dissociation not previously reported. Experimental results obtained for a dislocation along [211] with for the six <220> type reflections using (g,5g) weak-beam conditions are summarised in the table below, together with the relevant values.

Multislice calculations of RHEED patterns from vicinal Si (001)

1993 ◽  
Vol 51 ◽  
pp. 1000-1001
Author(s):  
Scott Lordi
Keyword(s):  
Misorientation Angle ◽  
Incident Angle ◽  
Incident Beam ◽  
Experimental Results ◽  
Bragg Condition ◽  
Vicinal Surfaces ◽  
Kinematic Theory ◽  
Step Edges

Vicinal Si (001) surfaces are interesting because they are good substrates for the growth of III-V semiconductors. Spots in RHEED patterns from vicinal surfaces are split due to scattering from ordered step arrays and this splitting can be used to determine the misorientation angle, using kinematic arguments. Kinematic theory is generally regarded to be inadequate for the calculation of RHEED intensities; however, only a few dynamical RHEED simulations have been attempted for vicinal surfaces. The multislice formulation of Cowley and Moodie with a recently developed edge patching method was used to calculate RHEED patterns from vicinal Si (001) surfaces. The calculated patterns are qualitatively similar to published experimental results and the positions of the split spots quantitatively agree with kinematic calculations.RHEED patterns were calculated for unreconstructed (bulk terminated) Si (001) surfaces misoriented towards [110] ,with an energy of 15 keV, at an incident angle of 36.63 mrad ([004] bragg condition), and a beam azimuth of [110] (perpendicular to the step edges) and the incident beam pointed down the step staircase.

Sign in / Sign up

Export Citation Format

Share Document