The research of single point diamond turning Fresnel lens technology

Author(s):  
Yuetian Huang ◽  
bin fan ◽  
yongjian wan ◽  
shijie li
Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4301
Author(s):  
Yassir A. Alamri ◽  
Saad Mahmoud ◽  
Raya Al-Dadah ◽  
Shivangi Sharma ◽  
J. N. Roy ◽  
...  

This paper investigates the potential of a new integrated solar concentrated photovoltaic (CPV) system that uses a solo point focus Fresnel lens for multiple multi-junction solar cells (MJSCs). The proposed system comprises of an FL concentrator as the primary optical element, a multi-leg homogeniser as the secondary optical element (SOE), a plano-concave lens, and four MJSCs. A three-dimensional model of this system was developed using the ray tracing method to predict the influence of aperture width, height, and position with respect to MJSCs of different reflective and refractive SOE on the overall optical efficiency of the system and the irradiance uniformity achieved on the MJSCs’ surfaces. The results show that the refractive homogeniser using N-BK7 glass can achieve higher optical efficiency (79%) compared to the reflective homogeniser (57.5%). In addition, the peak to average ratio of illumination at MJSCs for the reflective homogeniser ranges from 1.07 to 1.14, while for the refractive homogeniser, it ranges from 1.06 to 1.34, causing minimum effects on the electrical performance of the MJSCs. The novelty of this paper is the development of a high concentration CPV system that integrates multiple MJSCs with a uniform distribution of rays, unlike the conventional CPV systems that utilise a single concentrator onto a single MJSC. The optical efficiency of the CPV system was also examined using both the types of homogeniser (reflective and refractive).


2012 ◽  
Vol 497 ◽  
pp. 165-169 ◽  
Author(s):  
He Ping Zhang ◽  
Dong Ming Guo ◽  
Xu Wang ◽  
Hang Gao

Although Single Point Diamond Turning (SPDT) can do pretty well in optical surfacing of large scale KDP crystal, both the surface accuracy and integrity are considerably high; meanwhile as the defects of micro-waveness and stress are inevitable, the laser-induced damage threshold of KDP optical elements after SPDT still cannot be satisfied. Because of the characters of deliquescent and water-soluble, the process of computer controlled Micro-nano deliquescence is attempted to remove the residual micro-waveness on KDP surface after SPDT. Based on the assumption of Preston and the characters of Micro-nano deliquescence, the model of material removal ratio is suggested, the dwell time for ascertained KDP surface is solved, the processing of computer controlled Micro-nano deliquescence is simulated and the processed surface condition on theory is obtained. Besides, the influences of different parameters on the surfacing efficiency and accuracy are analyzed. Finally, three polishing tracks are comparatively analyzed. The simulation results are quite important in guiding the experimental polishing of large scale KDP by computer controlled Micro-nano deliquescence


2019 ◽  
Vol 151 ◽  
pp. 1-12 ◽  
Author(s):  
Guoqing Zhang ◽  
Yuqi Dai ◽  
Suet To ◽  
Xiaoyu Wu ◽  
Yan Lou

Sign in / Sign up

Export Citation Format

Share Document