Analyzing thermal effect of charging and discharging process in KTN crystal for optical beam deflector applications (Conference Presentation)

2018 ◽  
Author(s):  
Yun Goo Lee ◽  
Annan Q. Shang ◽  
Wenbin Zhu ◽  
Ju-Hung Chao ◽  
Chang-Jiang Chen ◽  
...  
Keyword(s):  
Thermal Effect ◽  
Optical Beam

UHV-STM studies of silicon nano-pyramid growth on silicon surface at high temperature

1992 ◽  
Vol 50 (2) ◽  
pp. 1144-1145
Author(s):  
T. Sato ◽  
S. Kitamura ◽  
T. Sueyoshl ◽  
M. Iwatukl ◽  
C. Nielsen
Keyword(s):  
High Temperature ◽  
Relaxation Process ◽  
Thermal Effect ◽  
Bias Voltage ◽  
Silicon Surface ◽  
Growth Process ◽  
Tunneling Current ◽  
Fabrication Technique ◽  
Nano Fabrication ◽  
Electromigration Effect

Recently, the growth process and relaxation process of crystalline structures were studied by observing a SI nano-pyramid which was built on a Si surface with a UHV-STM. A UHV-STM (JEOL JSTM-4000×V) was used for studying a heated specimen, and the specimen was kept at high temperature during observation. In this study, the nano-fabrication technique utilizing the electromigration effect between the STM tip and the specimen was applied. We observed Si atoms migrated towords the tip on a high temperature Si surface.Clean surfaces of Si(lll)7×7 and Si(001)2×l were prepared In the UHV-STM at a temperature of approximately 600 °C. A Si nano-pyramid was built on the Si surface at a tunneling current of l0nA and a specimen bias voltage of approximately 0V in both polarities. During the formation of the pyramid, Images could not be observed because the tip was stopped on the sample. After the formation was completed, the pyramid Image was observed with the same tip. After Imaging was started again, the relaxation process of the pyramid started due to thermal effect.

Electromagnetically Driven 2-axis Optical Beam Steering MEMS Mirror and Its Dependence of Actuation on Magnetic Field

2010 ◽  
Vol 130 (4) ◽  
pp. 107-112 ◽  
Author(s):  
Yoshiyuki Watanabe ◽  
Yutaka Abe ◽  
Shinnosuke Iwamatsu ◽  
Seiya Kobayashi ◽  
Yoshiyuki Takahashi ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Beam Steering ◽  
Optical Beam

Comparison of Active and Passive Voltage Contrast for Failure Localization

2007 ◽  
Author(s):  
R. Rosenkranz ◽  
W. Werner
Keyword(s):  
Case Studies ◽  
Optical Beam ◽  
Leakage Currents ◽  
Localization Method ◽  
Voltage Contrast ◽  
Failure Localization

Abstract In many cases of failure localization, passive voltage contrast (PVC) localization method does not work, because it is not possible to charge up conducting structures which supposed to be dark in the SEM and FIB images. The reason for this is leakage currents. In this article, the authors show how they succeeded in overcoming these difficulties by the application of the active voltage contrast (AVC) method as it was described as biased voltage contrast by Campbell and Soden. They identified three main cases where the PVC didn't work but where they succeeded in failure localization with the AVC method. This is illustrated with the use of two case studies. Compared to the optical beam based methods the resolution is much better so a single failing contact of e.g. 70 nm technology can clearly be identified which cannot be done by TIVA or OBIRCH.

Sign in / Sign up

Export Citation Format

Share Document