Comparison between LED and LD as a light source for near-eye holographic display

It is believed by the authors, with supporting experimental evidence, that as little as 0.5°, or less, knife clearance angle may be a critical factor in obtaining optimum quality ultrathin sections. The degree increments located on the knife holder provides the investigator with only a crude approximation of the angle at which the holder is set. With the increments displayed on the holder one cannot set the clearance angle precisely and reproducibly. The ability to routinely set this angle precisely and without difficulty would obviously be of great assistance to the operator. A device has been contrived to aid the investigator in precisely setting the clearance angle. This device is relatively simple and is easily constructed. It consists of a light source and an optically flat, front surfaced mirror with a minute black spot in the center. The mirror is affixed to the knife by placing it permanently on top of the knife holder.

Download Full-text

A confocal laser scanning microscope for fluorescence and reflection at video rates

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100152641 ◽

1989 ◽

Vol 47 ◽

pp. 134-135

Author(s):

P.M. Houpt ◽

A. Draaijer

Keyword(s):

Light Source ◽

Laser Scanning ◽

Focal Point ◽

Confocal Laser Scanning Microscope ◽

Confocal Laser ◽

Point Light Source ◽

Volume Of Interest ◽

Ion Laser ◽

Point Light ◽

Point Detector

In confocal microscopy, the object is scanned by the coinciding focal points (confocal) of a point light source and a point detector both focused on a certain plane in the object. Only light coming from the focal point is detected and, even more important, out-of-focus light is rejected.This makes it possible to slice up optically the ‘volume of interest’ in the object by moving it axially while scanning the focused point light source (X-Y) laterally. The successive confocal sections can be stored in a computer and used to reconstruct the object in a 3D image display.The instrument described is able to scan the object laterally with an Ar ion laser (488 nm) at video rates. The image of one confocal section of an object can be displayed within 40 milliseconds (1000 х 1000 pixels). The time to record the total information within the ‘volume of interest’ normally depends on the number of slices needed to cover it, but rarely exceeds a few seconds.

Download Full-text

Inter-Method Reliability of Pulse Volume Related Measures Derived Using Finger-Photoplethysmography

Journal of Psychophysiology ◽

10.1027/0269-8803/a000197 ◽

2018 ◽

Vol 32 (4) ◽

pp. 182-190 ◽

Cited By ~ 4

Author(s):

Kenta Matsumura ◽

Koichi Shimizu ◽

Peter Rolfe ◽

Masanori Kakimoto ◽

Takehiro Yamakoshi

Keyword(s):

Light Intensity ◽

Adverse Effects ◽

Light Source ◽

Direct Current ◽

Resting State ◽

Current Component ◽

Psychophysiological Measures ◽

Pulse Volume ◽

Optical Paths ◽

Sensor Positions

Abstract. Pulse volume (PV) and its related measures, such as modified normalized pulse volume (mNPV), direct-current component (DC), and pulse rate (PR), derived from the finger-photoplethysmogram (FPPG), are useful psychophysiological measures. Although considerable uncertainties exist in finger-photoplethysmography, little is known about the extent of the adverse effects on the measures. In this study, we therefore examined the inter-method reliability of each index across sensor positions and light intensities, which are major disturbance factors of FPPG. From the tips of the index fingers of 12 participants in a resting state, three simultaneous FPPGs having overlapping optical paths were recorded, with their light intensity being changed in three steps. The analysis revealed that the minimum values of three coefficients of Cronbach’s α for ln PV, ln mNPV, ln DC, and PR across positions were .948, .850, .922, and 1.000, respectively, and that those across intensities were .774, .985, .485, and .998, respectively. These findings suggest that ln mNPV and PR can be used for psychophysiological studies irrespective of minor differences in sensor attachment positions and light source intensity, whereas and ln DC can also be used for such studies but under the condition of light intensity being fixed.

Download Full-text

X-ray microscopy by phase-retrieval methods at the advanced light source

Journal de Physique IV (Proceedings) ◽

10.1051/jp4:20030143 ◽

2003 ◽

Vol 104 ◽

pp. 557-561 ◽

Cited By ~ 3

Author(s):

M. R. Howells ◽

H. Chapman ◽

S. Hau-Riege ◽

H. He ◽

S. Marchesini ◽

...

Keyword(s):

Light Source ◽

Phase Retrieval ◽

X Ray ◽

Advanced Light Source

Download Full-text