Alignment of the Korsch type off-axis 3 mirror optical system using sensitivity table method

2018 ◽  
Author(s):  
Kyungmuk Lee ◽  
Sug-Whan Kim ◽  
Haeng-Bok Lee ◽  
Se-Chol Choi ◽  
Jinsuk Hong ◽  
...  
Keyword(s):  
Optical System ◽  
Table Method

scholarly journals Research on Applicability of Sensitivity Table Method in Optical System Alignment

2020 ◽  
Vol 440 ◽  
pp. 032027
Author(s):  
Wei Wu ◽  
Jianzhong Shang ◽  
Yujun Cao ◽  
Chunqi Chen ◽  
Jun Zhou
Keyword(s):  
Optical System ◽  
Table Method

A Field Emission System For Transmission Electron Microscopy

1973 ◽  
Vol 31 ◽  
pp. 298-299
Author(s):  
Michel Troyonal ◽  
Huei Pei Kuoal ◽  
Benjamin M. Siegelal
Keyword(s):  
Electron Microscope ◽  
Field Emission ◽  
Optical System ◽  
High Vacuum ◽  
Ultra High Vacuum ◽  
Objective Lens ◽  
Electron Optical System ◽  
Cross Sectional ◽  
Transmission Electron ◽  
Emission System

A field emission system for our experimental ultra high vacuum electron microscope has been designed, constructed and tested. The electron optical system is based on the prototype whose performance has already been reported. A cross-sectional schematic illustrating the field emission source, preaccelerator lens and accelerator is given in Fig. 1. This field emission system is designed to be used with an electron microscope operated at 100-150kV in the conventional transmission mode. The electron optical system used to control the imaging of the field emission beam on the specimen consists of a weak condenser lens and the pre-field of a strong objective lens. The pre-accelerator lens is an einzel lens and is operated together with the accelerator in the constant angular magnification mode (CAM).

Information and estimation in image processing

1987 ◽  
Vol 45 ◽  
pp. 14-17
Author(s):  
B. Roy Frieden
Keyword(s):  
Image Processing ◽  
Optical System ◽  
Large Amplitude ◽  
Communication Theory ◽  
Image Data ◽  
Direct Approach ◽  
Ill Posed

Despite the skill and determination of electro-optical system designers, the images acquired using their best designs often suffer from blur and noise. The aim of an “image enhancer” such as myself is to improve these poor images, usually by digital means, such that they better resemble the true, “optical object,” input to the system. This problem is notoriously “ill-posed,” i.e. any direct approach at inversion of the image data suffers strongly from the presence of even a small amount of noise in the data. In fact, the fluctuations engendered in neighboring output values tend to be strongly negative-correlated, so that the output spatially oscillates up and down, with large amplitude, about the true object. What can be done about this situation? As we shall see, various concepts taken from statistical communication theory have proven to be of real use in attacking this problem. We offer below a brief summary of these concepts.

Atomic Resolution in Crystal Aperture Stem

1990 ◽  
Vol 48 (1) ◽  
pp. 236-237
Author(s):  
J T Fourie
Keyword(s):  
Optical System ◽  
Spherical Aberration ◽  
Three Dimensional ◽  
Transmission Function ◽  
Optical Systems ◽  
Bragg Angle ◽  
Electron Optical System ◽  
Intimate Contact ◽  
Diffraction Effects ◽  
Design Aspect

The attempts at improvement of electron optical systems to date, have largely been directed towards the design aspect of magnetic lenses and towards the establishment of ideal lens combinations. In the present work the emphasis has been placed on the utilization of a unique three-dimensional crystal objective aperture within a standard electron optical system with the aim to reduce the spherical aberration without introducing diffraction effects. A brief summary of this work together with a description of results obtained recently, will be given.The concept of utilizing a crystal as aperture in an electron optical system was introduced by Fourie who employed a {111} crystal foil as a collector aperture, by mounting the sample directly on top of the foil and in intimate contact with the foil. In the present work the sample was mounted on the bottom of the foil so that the crystal would function as an objective or probe forming aperture. The transmission function of such a crystal aperture depends on the thickness, t, and the orientation of the foil. The expression for calculating the transmission function was derived by Hashimoto, Howie and Whelan on the basis of the electron equivalent of the Borrmann anomalous absorption effect in crystals. In Fig. 1 the functions for a g220 diffraction vector and t = 0.53 and 1.0 μm are shown. Here n= Θ‒ΘB, where Θ is the angle between the incident ray and the (hkl) planes, and ΘB is the Bragg angle.

STEM and ELS Observation of Early Oxide Formation on the Surface of Cr Thin Films

1980 ◽  
Vol 38 ◽  
pp. 412-413
Author(s):  
Fumio Watari ◽  
J. M. Cowley
Keyword(s):  
Thin Films ◽  
Optical System ◽  
Room Temperature ◽  
Oxide Formation ◽  
Initial Nucleation ◽  
Diffraction Patterns ◽  
Relationship Of ◽  
Multiple Twinning ◽  
Moderately High Temperature

STEM coupled with the optical system was used for the investigation of the early oxidation on the surface of Cr. Cr thin films (30 – 1000Å) were prepared by evaporation onto the polished or air-cleaved NaCl substrates at room temperature and 45°C in a vacuum of 10−6 Torr with an evaporation speed 0.3Å/sec. Rather thick specimens (200 – 1000Å) with various preferred orientations were used for the investigation of the oxidation at moderately high temperature (600 − 1100°C). Selected area diffraction patterns in these specimens are usually very much complicated by the existence of the different kinds of oxides and their multiple twinning. The determination of the epitaxial orientation relationship of the oxides formed on the Cr surface was made possible by intensive use of the optical system and microdiffraction techniques. Prior to the formation of the known rhombohedral Cr2O3, a thin spinel oxide, probably analogous to γ -Al203 or γ -Fe203, was formed. Fig. 1a shows the distinct epitaxial growth of the spinel (001) as well as the rhombohedral (125) on the well-oriented Cr(001) surface. In the case of the Cr specimen with the (001) preferred orientation (Fig. 1b), the rings explainable by spinel structure appeared as well as the well defined epitaxial spots of the spinel (001). The microdif fraction from 20A areas (Fig. 2a) clearly shows the same pattern as Fig. Ia with the weaker oxide spots among the more intense Cr spots, indicating that the thickness of the oxide is much less than that of Cr. The rhombohedral Cr2O3 was nucleated preferably at the Cr(011) sites provided by the polycrystalline nature of the present specimens with the relation Cr2O3 (001)//Cr(011), and by further oxidation it grew into full coverage of the rest of the Cr surface with the orientation determined by the initial nucleation.

Hepatitis-Free Interval After Clotting Factor Therapy in First Infused Haemophiliacs

1986 ◽  
Vol 56 (03) ◽  
pp. 268-270 ◽  
Author(s):  
M Morfini ◽  
D Rafanelli ◽  
G Longo ◽  
A Messori ◽  
P Rossi Ferrini
Keyword(s):  
Life Table ◽  
Lower Risk ◽  
Clotting Factor ◽  
Rank Test ◽  
Life Table Method ◽  
Table Method ◽  
Log Rank Test ◽  
Free Interval ◽  
Post Infusion ◽  
Clotting Factor Concentrates

SummaryPost-infusion hepatitis is known to occur very frequently in haemophiliacs after treatment with unheated commercial clotting factor concentrates, obtained from large plasma donation pool. On the contrary, single-donor cryoprecipitate is likely to carry a lower risk of transmitting hepatitis.To evaluate this hypothesis, we retrospectively reviewed the medical records of 25 first infused haemophiliacs (from 1981 to 1984) treated with unheated commercial clotting factor concentrates (n = 19) or cryoprecipitate (n = 6).The hepatitis-free interval after the beginning of therapy was expressed as exposure days. The end point of each patient, i.e. the hepatitis occurrence, was defined as an increase of aminotransferases (ALT and AST) and/or the seroconversion of HBV-markers, which were checked every three months.The life-table method and log-rank test showed that cryo-precipitates had a significantly longer hepatitis-free interval (p = 0.0131, log-rank test) and a lower risk of transmitting hepatitis (p = 0.01-0.05, life-table method) than the commercial concentrates. However, the safety of cryoprecipitate therapy was shown to cover only a few exposure days, and so the real advantage of this product depends on the bleeding frequency of the patient concerned.We believe that these methods and our findings may be useful to assess and compare the safety of the new “heat-treated” clotting factor concentrates.

Experimental Investigation on a Radio-on-free-space Optical System Suitable for Provision of Ubiquitous Wireless Services

PIERS Online ◽  
2010 ◽  
Vol 6 (5) ◽  
pp. 400-405 ◽  
Author(s):  
Mitsuji Matsumoto ◽  
Kamugisha Kazaura ◽  
Kazuhiko Wakamori ◽  
Takeshi Higashino ◽  
Katsutoshi Tsukamoto ◽  
...  
Keyword(s):  
Experimental Investigation ◽  
Optical System ◽  
Free Space ◽  
Free Space Optical ◽  
Wireless Services

Types of refractive errors and methods for their diagnosis

2020 ◽  
pp. 30-36
Author(s):  
Olga Lemzyakova
Keyword(s):  
Optical System ◽  
Contact Lenses ◽  
Vision Impairment ◽  
Refractive Errors ◽  
Vision Correction ◽  
Light Rays ◽  
Different Types ◽  
Almost All ◽  
Degrees Of Severity ◽  
The Brain

Refraction of the eye means its ability to bend (refract) light in its own optical system. In a normal state, which is called emmetropia, light rays passing through the optical system of the eye focus on the retina, from where the impulse is transmitted to the visual cortex of the brain and is analyzed there. A person sees equally well both in the distance and near in this situation. However, very often, refractive errors develop as a result of various types of influences. Myopia, or short-sightedness, occurs when the light rays are focused in front of the retina as a result of passing through the optical system of the eye. In this case, a person will clearly distinguish close objects and have difficulties in seeing distant objects. On the opposite side is development of farsightedness (hypermetropia), in which the focusing of light rays occurs behind the retina — such a person sees distant objects clearly, but outlines of closer objects are out of focus. Near vision impairment in old age is a natural process called presbyopia, it develops due to the lens thickening. Both myopia and hypermetropia can have different degrees of severity. The variant, when different refractive errors are observed in different eyes, is called anisometropia. In the same case, if different types of refraction are observed in the same eye, it is astigmatism, and most often it is a congenital pathology. Almost all of the above mentioned refractive errors require correction with spectacles or use of contact lenses. Recently, people are increasingly resorting to the methods of surgical vision correction.

Sign in / Sign up

Export Citation Format

Share Document