Performance of apodized Bragg gratings in dynamic strain measurements using interferometric interrogation

1999 ◽  
Author(s):  
Karianne Pran
Keyword(s):  
Bragg Gratings ◽  
Dynamic Strain ◽  
Strain Measurements

scholarly journals Dynamic Strain Measurements by Fiber Bragg Gratings and a 100 MHz Dispersive Spectrometer

2019 ◽  
Author(s):  
Y. Barbarin ◽  
V. Chuzeville ◽  
V. Colas ◽  
J. M. Chevalier ◽  
P. Hereil ◽  
...  
Keyword(s):  
Fiber Bragg Gratings ◽  
Bragg Gratings ◽  
Dynamic Strain ◽  
Strain Measurements

scholarly journals Distributed Static and Dynamic Strain Measurements in Polymer Optical Fibers by Rayleigh Scattering

Sensors ◽  
2021 ◽  
Vol 21 (15) ◽  
pp. 5049
Author(s):  
Agnese Coscetta ◽  
Ester Catalano ◽  
Enis Cerri ◽  
Ricardo Oliveira ◽  
Lucia Bilro ◽  
...  
Keyword(s):  
Optical Fibers ◽  
Time Domain ◽  
Rayleigh Scattering ◽  
Cost Effective ◽  
Time Domain Reflectometry ◽  
Dynamic Strain ◽  
Strain Measurements ◽  
Graded Index ◽  
Optical Time ◽  
Polymer Optical Fibers

We demonstrate the use of a graded-index perfluorinated optical fiber (GI-POF) for distributed static and dynamic strain measurements based on Rayleigh scattering. The system is based on an amplitude-based phase-sensitive Optical Time-Domain Reflectometry (ϕ-OTDR) configuration, operated at the unconventional wavelength of 850 nm. Static strain measurements have been carried out at a spatial resolution of 4 m and for a strain up to 3.5% by exploiting the increase of the backscatter Rayleigh coefficient consequent to the application of a tensile strain, while vibration/acoustic measurements have been demonstrated for a sampling frequency up to 833 Hz by exploiting the vibration-induced changes in the backscatter Rayleigh intensity time-domain traces arising from coherent interference within the pulse. The reported tests demonstrate that polymer optical fibers can be used for cost-effective multiparameter sensing.

Measurement of Dynamic Strain

1943 ◽  
Vol 10 (2) ◽  
pp. A85-A92
Author(s):  
C. O. Dohrenwend ◽  
W. R. Mehaffey
Keyword(s):  
High Speed ◽  
Shock Loading ◽  
Low Frequency ◽  
Dynamic Strain ◽  
Time Axis ◽  
Low Frequencies ◽  
Strain Measurements ◽  
Moving Vehicles ◽  
Machine Parts ◽  
Dynamic Strains

Abstract The measurement of dynamic strains of both high and low frequency give rise to a variety of problems in instrumentation. Two types of equipment and circuits designed and used by the authors are discussed in detail. The first type based on the amplitude-modulated method is for low frequencies from zero to about 15 per cent of the carrier frequency of 1025 cycles per sec. The equipment has application to strain measurements varying from static values to those produced in moving vehicles, various machine parts, structures such as crane bridges, in fact all strain measurements where the frequency is 150 cycles per sec or less. The second type of equipment discussed is a potentiometer type and is for high-frequency strain measurements from 100 cycles per sec to 8000 cycles per sec. This high-speed equipment is conveniently used for impact strain, such as produced in hammer blows, shock loading, forging equipment, and impact-factor determination. Both units are designed to be used with a cathode-ray oscillograph which lends itself to a variety of recording methods. The methods discussed include both the type where the time axis is obtained by sweeping the oscilloscope beam on a stationary film and where the time axis is obtained mechanically.

CPDWI-assisted BOTDA for fast dynamic strain measurements

2021 ◽  
Author(s):  
Yin Zhou ◽  
Lianshan Yan ◽  
Haijun He ◽  
Xinpu Zhang ◽  
Wei Pan ◽  
...  
Keyword(s):  
Dynamic Strain ◽  
Strain Measurements ◽  
Fast Dynamic
Sign in / Sign up

Export Citation Format

Share Document