Development of relative angle determinable stitching interferometry for high-accuracy x-ray focusing mirrors

2017 ◽  
Author(s):  
Zhanshan Wang ◽  
Yingna Shi ◽  
Qiushi Huang ◽  
Hua Wang ◽  
Aiguo Li ◽  
...  
Keyword(s):  
High Accuracy ◽  
X Ray ◽  
Relative Angle

scholarly journals The Degree of Oxidation of Graphene Oxide

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 560
Author(s):  
Alexandra Carvalho ◽  
Mariana C. F. Costa ◽  
Valeria S. Marangoni ◽  
Pei Rou Ng ◽  
Thi Le Hang Nguyen ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Ab Initio ◽  
State Of The Art ◽  
High Accuracy ◽  
Precise Determination ◽  
Photoemission Spectroscopy ◽  
Pristine Graphene ◽  
X Ray ◽  
Degree Of Oxidation

We show that the degree of oxidation of graphene oxide (GO) can be obtained by using a combination of state-of-the-art ab initio computational modeling and X-ray photoemission spectroscopy (XPS). We show that the shift of the XPS C1s peak relative to pristine graphene, ΔEC1s, can be described with high accuracy by ΔEC1s=A(cO−cl)2+E0, where c0 is the oxygen concentration, A=52.3 eV, cl=0.122, and E0=1.22 eV. Our results demonstrate a precise determination of the oxygen content of GO samples.

scholarly journals 2D–3D reconstruction of distal forearm bone from actual X-ray images of the wrist using convolutional neural networks

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ryoya Shiode ◽  
Mototaka Kabashima ◽  
Yuta Hiasa ◽  
Kunihiro Oka ◽  
Tsuyoshi Murase ◽  
...  
Keyword(s):  
Wrist Joint ◽  
High Accuracy ◽  
Training Data ◽  
Small Data ◽  
Data Set ◽  
Accuracy Estimation ◽  
X Ray ◽  
Learning Network ◽  
Forearm Bone ◽  
Deep Learning Network

AbstractThe purpose of the study was to develop a deep learning network for estimating and constructing highly accurate 3D bone models directly from actual X-ray images and to verify its accuracy. The data used were 173 computed tomography (CT) images and 105 actual X-ray images of a healthy wrist joint. To compensate for the small size of the dataset, digitally reconstructed radiography (DRR) images generated from CT were used as training data instead of actual X-ray images. The DRR-like images were generated from actual X-ray images in the test and adapted to the network, and high-accuracy estimation of a 3D bone model from a small data set was possible. The 3D shape of the radius and ulna were estimated from actual X-ray images with accuracies of 1.05 ± 0.36 and 1.45 ± 0.41 mm, respectively.

scholarly journals X-ray Diffraction Analysis and Williamson-Hall Method in USDM Model for Estimating More Accurate Values of Stress-Strain of Unit Cell and Super Cells (2 × 2 × 2) of Hydroxyapatite, Confirmed by Ultrasonic Pulse-Echo Test

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2949
Author(s):  
Marzieh Rabiei ◽  
Arvydas Palevicius ◽  
Amir Dashti ◽  
Sohrab Nasiri ◽  
Ahmad Monshi ◽  
...  
Keyword(s):  
Young’S Modulus ◽  
Young's Modulus ◽  
Ultrasonic Pulse ◽  
High Accuracy ◽  
Unit Cell ◽  
Deformation Model ◽  
X Ray Diffraction ◽  
Uniform Deformation ◽  
X Ray ◽  
Pulse Echo

Taking into account X-ray diffraction, one of the well-known methods for calculating the stress-strain of crystals is Williamson-Hall (W–H). The W-H method has three models, namely (1) Uniform deformation model (UDM); (2) Uniform stress deformation model (USDM); and (3) Uniform deformation energy density model (UDEDM). The USDM and UDEDM models are directly related to the modulus of elasticity (E). Young’s modulus is a key parameter in engineering design and materials development. Young’s modulus is considered in USDM and UDEDM models, but in all previous studies, researchers used the average values of Young’s modulus or they calculated Young’s modulus only for a sharp peak of an XRD pattern or they extracted Young’s modulus from the literature. Therefore, these values are not representative of all peaks derived from X-ray diffraction; as a result, these values are not estimated with high accuracy. Nevertheless, in the current study, the W-H method is used considering the all diffracted planes of the unit cell and super cells (2 × 2 × 2) of Hydroxyapatite (HA), and a new method with the high accuracy of the W-H method in the USDM model is presented to calculate stress (σ) and strain (ε). The accounting for the planar density of atoms is the novelty of this work. Furthermore, the ultrasonic pulse-echo test is performed for the validation of the novelty assumptions.

scholarly journals Evolving Deep Learning Convolutional Neural Networks for Early COVID-19 Detection in Chest X-ray Images

Mathematics ◽  
2021 ◽  
Vol 9 (9) ◽  
pp. 1002
Author(s):  
Mohammad Khishe ◽  
Fabio Caraffini ◽  
Stefan Kuhn
Keyword(s):  
Deep Learning ◽  
Early Detection ◽  
Iterative Process ◽  
High Accuracy ◽  
X Ray ◽  
Starting Point ◽  
Reliable Model ◽  
Minimum Number ◽  
Chest X Ray ◽  
Deep Learning Model

This article proposes a framework that automatically designs classifiers for the early detection of COVID-19 from chest X-ray images. To do this, our approach repeatedly makes use of a heuristic for optimisation to efficiently find the best combination of the hyperparameters of a convolutional deep learning model. The framework starts with optimising a basic convolutional neural network which represents the starting point for the evolution process. Subsequently, at most two additional convolutional layers are added, at a time, to the previous convolutional structure as a result of a further optimisation phase. Each performed phase maximises the the accuracy of the system, thus requiring training and assessment of the new model, which gets gradually deeper, with relevant COVID-19 chest X-ray images. This iterative process ends when no improvement, in terms of accuracy, is recorded. Hence, the proposed method evolves the most performing network with the minimum number of convolutional layers. In this light, we simultaneously achieve high accuracy while minimising the presence of redundant layers to guarantee a fast but reliable model. Our results show that the proposed implementation of such a framework achieves accuracy up to 99.11%, thus being particularly suitable for the early detection of COVID-19.

scholarly journals XPS Investigations on Solid and Vacuum Deposited, Oxidized and Non-oxidized Palladium

1995 ◽  
Vol 50 (4-5) ◽  
pp. 381-387 ◽  
Author(s):  
Jürgen Kintrup ◽  
Harald Züchner
Keyword(s):  
Chemical Shift ◽  
Curve Fitting ◽  
Photoelectron Spectroscopy ◽  
Chemical Shifts ◽  
Atmospheric Oxygen ◽  
Hydrogen Permeability ◽  
Photoelectric Effect ◽  
High Accuracy ◽  
X Ray ◽  
Charging Effect

Abstract X-ray photoelectron spectroscopy (XPS) has been carried out to study the reaction of differently prepared palladium samples (solid and film Pd) with atmospheric oxygen. A careful curve fitting of the measured Pd-3d5/2 peak allows to separate the Pd-3d5/2 peak for Pd in surface PdO from the dominant Pd-3d5/2 peak of the non-oxidized bulk palladium and to determine the chemical shift of the "oxidized" Pa line with high accuracy. Differences in the chemical shifts for the surface PdO on solid and film palladium are explained by a different charging caused by the photoelectric effect in XPS measurements. The smaller charging effect observed for film palladium as compared to solid palladium indicates a stronger oxygen bonding to the (rougher) film palladium. The strong Pd-O bonding seems to be an essential reason for the reduced hydrogen-permeability of film palladium compared to solid palladium

scholarly journals Multiple linear regression and random forest to predict and map soil properties using data from portable X-ray fluorescence spectrometer (pXRF)

2017 ◽  
Vol 41 (6) ◽  
pp. 648-664 ◽  
Author(s):  
Sérgio Henrique Godinho Silva ◽  
Anita Fernanda dos Santos Teixeira ◽  
Michele Duarte de Menezes ◽  
Luiz Roberto Guimarães Guilherme ◽  
Fatima Maria de Souza Moreira ◽  
...  
Keyword(s):  
Random Forest ◽  
Linear Regression ◽  
Soil Properties ◽  
Multiple Linear Regression ◽  
Low Cost ◽  
High Accuracy ◽  
Important Variable ◽  
X Ray ◽  
Element Contents ◽  
Fluorescence Spectrometer

ABSTRACT Determination of soil properties helps in the correct management of soil fertility. The portable X-ray fluorescence spectrometer (pXRF) has been recently adopted to determine total chemical element contents in soils, allowing soil property inferences. However, these studies are still scarce in Brazil and other countries. The objectives of this work were to predict soil properties using pXRF data, comparing stepwise multiple linear regression (SMLR) and random forest (RF) methods, as well as mapping and validating soil properties. 120 soil samples were collected at three depths and submitted to laboratory analyses. pXRF was used in the samples and total element contents were determined. From pXRF data, SMLR and RF were used to predict soil laboratory results, reflecting soil properties, and the models were validated. The best method was used to spatialize soil properties. Using SMLR, models had high values of R² (≥0.8), however the highest accuracy was obtained in RF modeling. Exchangeable Ca, Al, Mg, potential and effective cation exchange capacity, soil organic matter, pH, and base saturation had adequate adjustment and accurate predictions with RF. Eight out of the 10 soil properties predicted by RF using pXRF data had CaO as the most important variable helping predictions, followed by P2O5, Zn and Cr. Maps generated using RF from pXRF data had high accuracy for six soil properties, reaching R2 up to 0.83. pXRF in association with RF can be used to predict soil properties with high accuracy at low cost and time, besides providing variables aiding digital soil mapping.

scholarly journals Compositional Dependence of Structural Properties of Prepared Alloys and Films

2011 ◽  
Vol 2011 ◽  
pp. 1-6
Author(s):  
M. F. A. Alias ◽  
A. A. J. Al-Douri ◽  
E. M. N. Al-Fawadi ◽  
A. A. Alnajjar
Keyword(s):  
Room Temperature ◽  
Thermal Evaporation ◽  
High Accuracy ◽  
Compositional Dependence ◽  
X Ray Diffraction ◽  
Thermal Evaporation Method ◽  
X Ray ◽  
Glass Substrates ◽  
Different Temperatures ◽  
Good Agreement

Results of a study of alloys and films with various Pb content have been reported and discussed. Films of of thickness 1.5 μm have been deposited on glass substrates by flash thermal evaporation method at room temperature, under vacuum at constant deposition rate. These films were annealed under vacuum around 10−6Torr at different temperatures up to 523 K. The composition of the elements in alloys was determined by standard surfaces techniques such as atomic absorption spectroscopy (AAS) and X-ray fluorescence (XRF), and the results were found of high accuracy and in very good agreement with the theoretical values. The structure for alloys and films is determined by using X-ray diffraction. This measurement reveals that the structure is polycrystalline with cubic structure and there are strong peaks at the direction (200) and (111). The effect of heat treatment on the crystalline orientation, relative intensity, and grain size of films is presented.

High-Accuracy X-ray Reflectivity Study of Native Oxide Formed in Chemical Treatment

1995 ◽  
Vol 34 (Part 2, No. 8A) ◽  
pp. L1013-L1016 ◽  
Author(s):  
Naoki Awaji ◽  
Yoshihiro Sugita ◽  
Satosi Ohkubo ◽  
Toshiro Nakanishi ◽  
Kanetake Takasaki ◽  
...  
Keyword(s):  
Chemical Treatment ◽  
High Accuracy ◽  
Native Oxide ◽  
X Ray
Sign in / Sign up

Export Citation Format

Share Document