Adaptive x-ray threat detection using sequential hypotheses testing with fan-beam experimental data (Conference Presentation)

2017 ◽  
Author(s):  
Ratchaneekorn Thamvichai ◽  
Liang-Chih Huang ◽  
Amit Ashok ◽  
Qian Gong ◽  
David Coccarelli ◽  
...  
Keyword(s):  
Experimental Data ◽  
Threat Detection ◽  
Hypotheses Testing ◽  
X Ray

Evidence for ordered Fe3Ni

1987 ◽  
Vol 45 ◽  
pp. 216-217
Author(s):  
K.B. Reuter ◽  
D.B. Williams ◽  
J.I. Goldstein
Keyword(s):  
Experimental Data ◽  
Martensitic Transformation ◽  
Electron Diffraction ◽  
Room Temperature ◽  
Direct Evidence ◽  
Transformation Product ◽  
Iron Meteorites ◽  
X Ray ◽  
Ni Content ◽  
Temperature Transformation

In the Fe-Ni system, although ordered FeNi and ordered Ni3Fe are experimentally well established, direct evidence for ordered Fe3Ni is unconvincing. Little experimental data for Fe3Ni exists because diffusion is sluggish at temperatures below 400°C and because alloys containing less than 29 wt% Ni undergo a martensitic transformation at room temperature. Fe-Ni phases in iron meteorites were examined in this study because iron meteorites have cooled at slow rates of about 10°C/106 years, allowing phase transformations below 400°C to occur. One low temperature transformation product, called clear taenite 2 (CT2), was of particular interest because it contains less than 30 wtZ Ni and is not martensitic. Because CT2 is only a few microns in size, the structure and Ni content were determined through electron diffraction and x-ray microanalysis. A Philips EM400T operated at 120 kV, equipped with a Tracor Northern 2000 multichannel analyzer, was used.

scholarly journals Zeolite NaP1 Functionalization for the Sorption of Metal Complexes with Biodegradable N-(1,2-dicarboxyethyl)-D,L-aspartic Acid

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2518
Author(s):  
Dorota Kołodyńska ◽  
Yongming Ju ◽  
Małgorzata Franus ◽  
Wojciech Franus
Keyword(s):  
Experimental Data ◽  
Aspartic Acid ◽  
Ph Value ◽  
Complexing Agents ◽  
X Ray Diffraction ◽  
Experimental Conditions ◽  
Modified Zeolite ◽  
X Ray ◽  
Slow Release Fertilizers ◽  
Pseudo Second Order

The possibility of application of chitosan-modified zeolite as sorbent for Cu(II), Zn(II), Mn(II), and Fe(III) ions and their mixtures in the presence of N-(1,2-dicarboxyethyl)-D,L-aspartic acid, IDHA) under different experimental conditions were investigated. Chitosan-modified zeolite belongs to the group of biodegradable complexing agents used in fertilizer production. NaP1CS as a carrier forms a barrier to the spontaneous release of the fertilizer into soil. The obtained materials were characterized by Fourier transform infrared spectroscopy (FTIR); surface area determination (ASAP); scanning electron microscopy (SEM-EDS); X-ray fluorescence (XRF); X-ray diffraction (XRD); and carbon, hydrogen, and nitrogen (CHN), as well as thermogravimetric (TGA) methods. The concentrations of Cu(II), Zn(II), Mn(II), and Fe(III) complexes with IDHA varied from 5–20 mg/dm3 for Cu(II), 10–40 mg/dm3 for Fe(III), 20–80 mg/dm3 for Mn(II), and 10–40 mg/dm3 for Zn(II), respectively; pH value (3–6), time (1–120 min), and temperature (293–333 K) on the sorption efficiency were tested. The Langmuir, Freundlich, Dubinin–Radushkevich, and Temkin adsorption models were applied to describe experimental data. The pH 5 proved to be appropriate for adsorption. The pseudo-second order and Langmuir models were consistent with the experimental data. The thermodynamic parameters indicate that adsorption is spontaneous and endothermic. The highest desorption percentage was achieved using the HCl solution, therefore, proving that method can be used to design slow-release fertilizers.

scholarly journals Phase Relations in the ZrO2-MgO-FeOx System: Experimental Data and Assessment of Thermodynamic Parameters

2021 ◽  
Author(s):  
Ivan Saenko ◽  
O. Fabrichnaya
Keyword(s):  
Electron Microscopy ◽  
Experimental Data ◽  
Solid Solution ◽  
Thermodynamic Parameters ◽  
Spinel Phase ◽  
Experimental Investigations ◽  
X Ray ◽  
Heat Treated ◽  
Preliminary Phase ◽  
Scanning Electron

AbstractThermodynamic parameters were assessed for the MgO–FeOx system and combined with already available descriptions of ZrO2-FeOx and ZrO2-MgO systems to calculate preliminary phase diagrams for planning experimental investigations. Samples of selected compositions were heat treated at 1523, 1673 and 1873 K and characterized using x-ray and scanning electron microscopy combined with energy dispersive x-ray spectroscopy (SEM/EDX). Experiments indicated extension of cubic ZrO2 solid solution into the ternary system at 1873 K (75 mol.% ZrO2, 10 mol.% FeOx and 15 mol.% MgO) and limited solubility of 4 mol.% ZrO2 in spinel phase. Based on the obtained results thermodynamic parameters of C-ZrO2 and spinel phase were optimized.

scholarly journals Enhancing removal efficiency of anionic dye (Cibacron blue) using waste potato peels powder

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Kahina Bouhadjra ◽  
Wahiba Lemlikchi ◽  
Azedine Ferhati ◽  
Samuel Mignard
Keyword(s):  
Experimental Data ◽  
Contact Time ◽  
Potato Peel ◽  
X Ray ◽  
Cibacron Blue ◽  
Anionic Dye ◽  
Experimental Parameters ◽  
Optimum Ph ◽  
Potato Peels ◽  
Scanning Electron

AbstractIn the present study, the potato peel waste (PP) was used for the removal of the anionic dye Cibacron Blue P3R from an aqueous solution, activated with phosphoric acid (PPa) and calcined at 800 °C (PPc). The materials were characterized by Scanning Electron Microscope, Energy dispersive X-ray analysis and Fourier Transform Infrared Spectroscopy. The effects of various experimental parameters (pH, dye concentration, contact time) were also studied. The experimental results have shown that PPc has a greater capacity compared to pp and ppa. The capacity of PP bio-char (PPc) is 270.3 mg g−1 compared to PP (100 mg g−1) and PPa (125 mg g−1). Equilibrium experiments at 180 min for all materials were carried out at optimum pH (2.2): 76.41, 88.6 and 94% for PP, PPa and PPc respectively; and the Langmuir models agreed very well with experimental data. The ability of sorbent for the sorption of CB dye follows this order: calcined > activated > native materials. Potato peel biochar (PPc) can be considered a promising adsorbent for removing persistent dyes from water.

scholarly journals Unbinding of Hyaluronan Accelerates the Enzymatic Activity of Bee Hyaluronidase

2011 ◽  
Vol 286 (41) ◽  
pp. 35699-35707 ◽  
Author(s):  
Attila Iliás ◽  
Károly Liliom ◽  
Brigitte Greiderer-Kleinlercher ◽  
Stephan Reitinger ◽  
Günter Lepperdinger
Keyword(s):  
Experimental Data ◽  
Quartz Crystal ◽  
Surface Loop ◽  
X Ray ◽  
Site Model ◽  
Substrate Interaction ◽  
Close Proximity ◽  
Binding Groove ◽  
The One ◽  
Best Fit

Hyaluronan (HA), a polymeric glycosaminoglycan ubiquitously present in higher animals, is hydrolyzed by hyaluronidases (HAases). Here, we used bee HAase as a model enzyme to study the HA-HAase interaction. Located in close proximity to the active center, a bulky surface loop, which appears to obstruct one end of the substrate binding groove, was found to be functionally involved in HA turnover. To better understand kinetic changes in substrate interaction, binding of high molecular weight HA to catalytically inactive HAase was monitored by means of quartz crystal microbalance technology. Replacement of the delimiting loop by a tetrapeptide interconnection increased the affinity for HA up to 100-fold, with a KD below 1 nm being the highest affinity among HA-binding proteins surveyed so far. The experimental data of HA-HAase interaction were further validated showing best fit to the theoretically proposed sequential two-site model. Besides the one, which had been shown previously in course of x-ray structure determination, a previously unrecognized binding site works in conjunction with an unbinding loop that facilitates liberation of hydrolyzed HA.

ALIGNMENT PHENOMENON IN GAMMA FAMILIES WITH ENERGIES 100–1000 TEV

2005 ◽  
Vol 20 (29) ◽  
pp. 7032-7034 ◽  
Author(s):  
T. S. YULDASHBAEV ◽  
KH. NURITDINOV
Keyword(s):  
Experimental Data ◽  
Energy Dependence ◽  
Energetic Particles ◽  
Emulsion Chamber ◽  
X Ray ◽  
Secondary Particles ◽  
String Models

According to Pamir X-ray Emulsion Chamber (XEC) experimental data at the energies E est > 2 × 1016 eV the fraction of events with four "aligned" most energetic particles increases sharply for families without leading secondary particles. That energy dependence is not described by Quark Gluon String Models.

Experimental and Archaeological Verification of an Index of Retouch for Hafted Bifaces

2006 ◽  
Vol 71 (4) ◽  
pp. 743-757 ◽  
Author(s):  
William Andrefsky
Keyword(s):  
Experimental Data ◽  
Land Use ◽  
Stone Tools ◽  
Stone Tool ◽  
Data Set ◽  
X Ray ◽  
Projectile Points

The relative amount of retouch on stone tools is central to many archaeological studies linking stone tool assemblages to broader issues of human social and economic land-use strategies. Unfortunately, most retouch measures deal with flake and blade tools and few (if any) have been developed for hafted bifaces and projectile points. This paper introduces a new index for measuring and comparing amount of retouch on hafted bifaces and projectile points that can be applied regardless of size or typological variance. The retouch index is assessed initially with an experimental data set of hafted bifaces that were dulled and resharpened on five occasions. The retouch index is then applied to a hafted biface assemblage made from tool stone that has been sourced by X-Ray Fluorescence (XRF). Results of both assessments show that the hafted biface retouch index (HRI) is effective for determining the amount of retouch and the degree to which the hafted bifaces have been curated.

scholarly journals The Use of Connected Masks for Reconstructing the Single Particle Image from X-Ray Diffraction Data. II. The Dependence of the Accuracy of the Solution on the Sampling Step of Experimental Data

2015 ◽  
Vol 10 (2) ◽  
pp. 508-525 ◽  
Author(s):  
Н.Л. Лунина ◽  
N.L. Lunina
Keyword(s):  
Experimental Data ◽  
Particle Image ◽  
Expected Improvement ◽  
Problem Solution ◽  
Phase Problem ◽  
X Ray Diffraction ◽  
Sampling Step ◽  
X Ray ◽  
X Ray Crystallography ◽  
Grid Points

Advances in the methodology of the X-ray diffraction experiments leads to a possibility to register the rays scattered by large isolated biological particles (viruses and individual cells) but not only by crystalline samples. The experiment with an isolated particle provides researchers with the intensities of the scattered rays for the continuous spectrum of scattering vectors. Such experiment gives much more experimental data than an experiment with a crystalline sample where the information is limited to a set of Bragg reflections. This opens up additional opportunities in solving underlying problem of X-ray crystallography, namely, calculating phase values for the scattered waves needed to restore the structure of the object under study. In practice, the original continuous diffraction pattern is sampled, reduced to the values at grid points in the space of scattering vectors (in the reciprocal space). The sampling step determines the amount of the information involved in solving the phase problem and the complexity of the necessary calculations. In this paper, we investigate the effect of the sampling step on the accuracy of the phase problem solution obtained by the method proposed earlier by the authors. It is shown that an expected improvement of the accuracy of the solution with the reducing the sampling step continues even after crossing the Nyquist limit defined as the inverse of the double size of the object under study.

Sign in / Sign up

Export Citation Format

Share Document