The impact of optical turbulence on particle image velocimetry

2017 ◽  
Author(s):  
Silvia Matt ◽  
Gero Nootz ◽  
Samuel Hellman ◽  
Weilin Hou
Keyword(s):  
Particle Image Velocimetry ◽  
Particle Image ◽  
Optical Turbulence ◽  
Image Velocimetry ◽  
The Impact

Particle Image Velocimetry Measurement and Computational Fluid Dynamic Simulations of the Unsteady Flow Within a Rotating Disk Cavity

2014 ◽  
Vol 136 (11) ◽  
Author(s):  
Xiang Luo ◽  
Dongdong Liu ◽  
Hongwei Wu ◽  
Zhi Tao
Keyword(s):  
Particle Image Velocimetry ◽  
Computational Fluid Dynamic ◽  
Particle Image ◽  
Fluid Dynamic ◽  
Three Dimensional ◽  
Rotating Disk ◽  
Turbine Rotor ◽  
Dynamic Simulations ◽  
Image Velocimetry ◽  
The Impact

In this article a combined experimental and numerical investigation of the unsteady mixing flow of the ingestion gas and rim sealing air inside a rotating disk cavity was carried out. A new test rig was set up, and the experiments were conducted on a 1.5-stage turbine rotor disk and included pressure measurements. The flow structure of the mixing region of the ingestion gas and sealing air in cavity was measured using the particle image velocimetry (PIV) technique. To complement the experimental investigation and to aid in understanding the flow mechanism within the cavity, a three-dimensional (3D) unsteady computational fluid dynamic (CFD) analysis was undertaken. Both simulated and experimental results indicated that near the rotating disk, (i) a large amount of the ingestion gas will turn around and flow out the cavity due to the impact of the centrifugal force and the Coriolis force, (ii) a small amount of ingestion gas will mix transiently with the sealing air inside the cavity, whereas near the static disk, (iii) the ingestion gas will flow into the cavity along the static wall and mix with the sealing air.

Flow Characteristics in the Improved Impinging Stream Reactor by Means of Particle Image Velocimetry (PIV)

2017 ◽  
Author(s):  
Liu Xueqing ◽  
Lu Luyi
Keyword(s):  
Fluid Dynamics ◽  
Mass Transfer ◽  
Particle Image Velocimetry ◽  
Particle Image ◽  
Flow Characteristics ◽  
Impact Zone ◽  
Inlet Velocity ◽  
Piv Technique ◽  
Image Velocimetry ◽  
The Impact

The impinging Stream is a novel technique in enhancing heat and mass transfer. In the conventional impinging stream reactor (ISR), as the particles in that reactor are affected by the fluid resistance, the energy of the particles is rapidly decreased after the infiltration of the reverse flow, which leads to the effective mixing of the particles. In this paper, we design an improved impinging stream reactor (IISR) that has different fluid inlet velocity but same mean fluid inlet velocity in a period, which still belongs to definition of impinging stream. In the present study, the flow characteristics in the IISR are investigated using particle image velocimetry (PIV) and computational fluid dynamics. The effects of the fluid inlet velocity in the axisymmetric opposed jets are discussed for equal mean volumetric flow rates of the two jets. The impingement plane and the flow filed of the IISR are measured from captured images using the PIV technique. The two fluid inlet velocity with different sinusoidal variations are applied in the improved impinging stream. Besides, the experimental results show that the impingement plane is moving instantaneously with the two inlet velocity changing dynamically, which expands efficient active areas compared with the conventional impinging stream. Besides, computational fluid dynamics are used in combination with the discrete phase model (CFD-DPM) to predict the flow characteristics within the improved Impinging Stream. The simulation results show that impinging stream flow field can be divided into the inlet, the impact zone, the exit zone and the vortex area. At the same time, the impact zone and the impingement plane is also found to be moving The CFD-DPM results give predictions that are in better agreement with the flow filed pictured by the PIV technique. Because of the complexity of the liquid immersion impinging stream, it is difficult to study the trajectory of the particles in the flow field, so we use the numerical simulation to study the motion of the particles in the immersion IISR. Analysis shows the effective mixing region of the particles can be greatly increased, particles’ motion trajectory can be longer and the heat and mass transfer between the particles and the interphase can be further enhanced. Compared with the conventional ISR, the IISR has obvious advantages. The results point out this improved impinging Stream has a good application prospect in future engineering works.

Sign in / Sign up

Export Citation Format

Share Document