Modeling the transparent shape memory gels by 3D printer Acculas

2016 ◽  
Author(s):  
Hiroaki Kumagai ◽  
Masanori Arai ◽  
Jin Gong ◽  
Kazuyuki Sakai ◽  
Masaru Kawakami ◽  
...  
Keyword(s):  
Shape Memory ◽  
3D Printer

Fabrication of shape memory gels using 3D printer (Conference Presentation)

2018 ◽  
Author(s):  
Md Nahin Islam Shiblee ◽  
Kumkum Ahmed ◽  
Azusa Saito ◽  
Hidemitsu Furukawa
Keyword(s):  
Shape Memory ◽  
3D Printer

Shape Memory Properties of Ti-Ni Shape Memory Alloy / Shape Memory Polymer Composites Using Additive Manufacturing

2021 ◽  
Vol 1016 ◽  
pp. 697-701
Author(s):  
Kazuhiro Kitamura
Keyword(s):  
Shape Memory ◽  
Transformation Temperature ◽  
Shape Recovery ◽  
Shape Memory Polymer ◽  
Shape Memory Polymers ◽  
The Other ◽  
3D Printer ◽  
Shape Memory Material ◽  
Polymer Resin ◽  
Shape Memory Properties

Shape memory alloys (SMAs) have the disadvantage that cooling is difficult and the actuating speed during cooling is slow. To resolve this problem, shape memory material actuators that operate only with heating is required. SMAs are characterized by a low apparent Young's modulus below the transformation temperature and a strong shape recovery force above the reverse transformation temperature. Alternatively, shape memory polymers (SMPs) have two properties: shape fixability and shape recovery. The SMPs are hardened below the glass transition (Tg) temperature and the material is recovered to memorized shape above the Tg temperature. The other hand, 3D printer is a machine that can directly output a 3D-designed product designed by a computer in 3D, and molded materials such as polymer, resin, metal, and ceramics. In this research, we developed the SMC of SMA wire and SMP sheet using adhesive that develops actuates into two shapes only by heating.

scholarly journals AM-FFF of Objects Using Commercial PLA Based Shape Memory Polymer Printed by an Open-Source 3D Printer

2020 ◽  
Vol 31 ◽  
pp. 30-34
Author(s):  
N. Dresler ◽  
A. Ulanov ◽  
M. Aviv ◽  
D. Ashkenazi ◽  
A. Stern
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Shape Memory ◽  
Open Source ◽  
Shape Memory Polymer ◽  
Manufacturing Processes ◽  
3D Printer ◽  
4D Printing ◽  
Fused Filament Fabrication ◽  
Memory Cycle

The 4D additive manufacturing processes are considered today as the "next big thing" in R&D. The aim of this research is to provide two examples of commercial PLA based shape memory polymer (SMP) objects printed on an open-source 3D printer in order to proof the feasibility of such novel 4D printing process. To that purpose, a PLA based filament of eSUN (4D filament e4D-1white, SMP) was chosen, and two applications, a spring and a vase, were designed by 3D-printing with additive manufacturing (AM) fused filament fabrication (FFF) technique. The 4D-printed objects were successfully produced, the shape memory effect and their functionality were demonstrated by achieving the shape-memory cycle of programming, storage and recovery.

Deformation Properties of 3D Printed Shape Memory Polymer

2016 ◽  
Vol 725 ◽  
pp. 378-382 ◽  
Author(s):  
Kohei Takeda ◽  
Shunichi Hayashi ◽  
Kazunori Ueki
Keyword(s):  
Transition Temperature ◽  
Shape Memory ◽  
Shape Memory Polymer ◽  
3D Printer ◽  
New Device ◽  
Fused Deposition ◽  
Deformation Properties ◽  
3D Printed ◽  
The Individual ◽  
Short Time

Recently, the 3D printer which can make products in a short time without cutting or casting has been attracted worldwide attention. If we use the 3D printer, it is possible that a customized product which is well suited to the individual is fabricated with low cost and in a short time. On the other hand, in the intelligent materials, shape memory polymer (SMP) has been practically used. In SMP, shape fixity and shape recovery appear based on the difference of properties of molecular motion between above and below the glass transition temperature in temperature variation. The thermomechanical property of SMP is close to that of the human body around glass the transition temperature. Since SMP has these characteristics, it can be applied to the elements coming into contact with body as a nursing-care robot in the medical field. Hence, if we make a product with SMP using the 3D printer, the new device which is well suited to the individual can be developed. In the present paper, the deformation properties of SMP made by the fused deposition modeling (FDM) 3D printer were investigated. The results obtained are as follows. (1) The deformation resistance and recovery strain in unloading of the 3D printed SMP under a low printing rate are higher and larger than these of the high printing rate. (2) If we heat the 3D printed SMP under a high printing rate, it does not recover the original shape perfectly since the residual stress appears during printing.

Tensile Failure of 55-Nitinol Wire

1975 ◽  
Vol 33 ◽  
pp. 46-47
Author(s):  
F. I. Grace
Keyword(s):  
Shape Memory ◽  
Shape Memory Effect ◽  
Memory Effect ◽  
Stoichiometric Composition ◽  
Tensile Failure ◽  
Initial State ◽  
Initial Shape ◽  
Nitinol Wire ◽  
Cscl Type ◽  
Shear Transformation

An interest in NiTi alloys with near stoichiometric composition (55 NiTi) has intensified since they were found to exhibit a unique mechanical shape memory effect at the Naval Ordnance Laboratory some twelve years ago (thus refered to as NITINOL alloys). Since then, the microstructural mechanisms associated with the shape memory effect have been investigated and several interesting engineering applications have appeared.The shape memory effect implies that the alloy deformed from an initial shape will spontaneously return to that initial state upon heating. This behavior is reported to be related to a diffusionless shear transformation which takes place between similar but slightly different CsCl type structures.

TEM study of order, structure and defects of β and martensite in Cu-Al-Mn shape memory alloys

1990 ◽  
Vol 48 (4) ◽  
pp. 188-189
Author(s):  
J.M. Guilemany ◽  
F. Peregrin
Keyword(s):  
Shape Memory ◽  
Orthophosphoric Acid ◽  
Isopropyl Alcohol ◽  
Metastable Phase ◽  
Characteristic Temperature ◽  
Ethanol Solution ◽  
Order Structure ◽  
Thin Foils ◽  
Polycrystalline Alloys ◽  
Diamond Saw

The shape memory effect (SME) shown by Cu-Al-Mn alloys stems from the thermoelastic martensitic transformation occuring between a β (L2,) metastable phase and a martensitic phase. The TEM study of both phases in single and polycrystalline Cu-Al-Mn alloys give us greater knowledge of the structure, order and defects.The alloys were obtained by vacuum melting of Cu, Al and Mn and single crystals were obtained from polycrystalline alloys using a modified Bridgman method. Four different alloys were used with (e/a) ranging from 1.41 to 1.46 . Two different heat treatments were used and the alloys also underwent thermal cycling throughout their characteristic temperature range -Ms, Mf, As, Af-. The specimens were cut using a low speed diamond saw and discs were mechanically thinned to 100 μm and then ion milled to perforation at 4 kV. Some thin foils were also prepared by twin-jet electropolishing, using a (1:10:50:50) urea: isopropyl alcohol: orthophosphoric acid: ethanol solution at 20°C. The foils were examinated on a TEM operated at 200 kV.

Sign in / Sign up

Export Citation Format

Share Document