Simple, monolithic optical element for forward-viewing spectrally encoded endoscopy (Conference Presentation)

2016 ◽  
Author(s):  
Dukho Do ◽  
Dongkyun Kang ◽  
Mitsuhiro Ikuta ◽  
Guillermo J. Tearney
Keyword(s):  
Optical Element ◽  
Spectrally Encoded

scholarly journals Nanooptical elements for visual verification

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Alexander Goncharsky ◽  
Anton Goncharsky ◽  
Dmitry Melnik ◽  
Svyatoslav Durlevich
Keyword(s):  
Electron Beam ◽  
Electron Beam Lithography ◽  
Mass Production ◽  
Optical Element ◽  
Visual Image ◽  
Zero Order ◽  
Diffractive Optical Elements ◽  
Optical Elements ◽  
Standard Equipment ◽  
Diffractive Element

AbstractThis paper focuses on the development of flat diffractive optical elements (DOEs) for protecting banknotes, documents, plastic cards, and securities against counterfeiting. A DOE is a flat diffractive element whose microrelief, when illuminated by white light, forms a visual image consisting of several symbols (digits or letters), which move across the optical element when tilted. The images formed by these elements are asymmetric with respect to the zero order. To form these images, the microrelief of a DOE must itself be asymmetric. The microrelief has a depth of ~ 0.3 microns and is shaped with an accuracy of ~ 10–15 nm using electron-beam lithography. The DOEs developed in this work are securely protected against counterfeiting and can be replicated hundreds of millions of times using standard equipment meant for the mass production of relief holograms.

scholarly journals Enhancing the Optical Efficiency of Near-Eye Displays with Liquid Crystal Optics

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 107
Author(s):  
Tao Zhan ◽  
En-Lin Hsiang ◽  
Kun Li ◽  
Shin-Tson Wu
Keyword(s):  
Virtual Reality ◽  
Liquid Crystal ◽  
High Efficiency ◽  
Berry Phase ◽  
Optical Element ◽  
Liquid Crystal Polymer ◽  
Proof Of Concept ◽  
Optical Efficiency ◽  
Crystal Polymer ◽  
Light Efficiency

We demonstrate a light efficient virtual reality (VR) near-eye display (NED) design based on a directional display panel and a diffractive deflection film (DDF). The DDF was essentially a high-efficiency Pancharatnam-Berry phase optical element made of liquid crystal polymer. The essence of this design is directing most of the display light into the eyebox. The proposed method is applicable for both catadioptric and dioptric VR lenses. A proof-of-concept experiment was conducted with off-the-shelf optical parts, where the light efficiency was enhanced by more than 2 times.

scholarly journals Holographic Display System to Suppress Speckle Noise Based on Beam Shaping

Photonics ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 204
Author(s):  
Di Wang ◽  
Yi-Wei Zheng ◽  
Nan-Nan Li ◽  
Qiong-Hua Wang
Keyword(s):  
Optical Element ◽  
Speckle Noise ◽  
Beam Shaping ◽  
Diffractive Optical Element ◽  
The Other ◽  
Spatial Light Modulators ◽  
Viewing Angle ◽  
Display System ◽  
Holographic Display ◽  
Light Modulators

In this paper, a holographic system to suppress the speckle noise is proposed. Two spatial light modulators (SLMs) are used in the system, one of which is used for beam shaping, and the other is used for reproducing the image. By calculating the effective viewing angle of the reconstructed image, the effective hologram and the effective region of the SLM are calculated accordingly. Then, the size of the diffractive optical element (DOE) is calculated accordingly. The dynamic DOEs and effective hologram are loaded on the effective regions of the two SLMs, respectively, while the wasted areas of the two SLMs are performed with zero-padded operations. When the laser passes through the first SLM, the light can be modulated by the effective DOEs. When the modulated beam illuminates the second SLM which is loaded with the effective hologram, the image is reconstructed with better quality and lower speckle noise. Moreover, the calculation time of the hologram is reduced. Experiments indicate the validity of the proposed system.

scholarly journals Light shaping from a physical-optics point of view

2020 ◽  
Vol 238 ◽  
pp. 02006
Author(s):  
Liangxin Yang ◽  
Irfan Badar ◽  
Christian Hellmann ◽  
Frank Wyrowski
Keyword(s):  
Fourier Transform ◽  
Optical Element ◽  
Initial Guess ◽  
Point Of View ◽  
Physical Optics ◽  
Diffraction Effect ◽  
Geometric Optics ◽  
Design Task ◽  
Tracing Techniques

In the design of optical element for light shaping, a geometric-optics assumption is usually used, where the validity of the assumption is rarely discussed in literature. In this work, the field tracing techniques for modeling light-shaping systems are presented, which reveals the optical element resulted from those geometric-base algorithm is not always accurate enough for the design task. An example is demonstrated with the functional embodiment of the element. The simulation result shows that diffraction effect may occur, especially in paraxial situation. However, the designed result start with the assumption is well-introduced initial guess for further optimization with the iterative Fourier transform algorithm (IFTA).

scholarly journals Optical Performance of Single Point-Focus Fresnel Lens Concentrator System for Multiple Multi-Junction Solar Cells—A Numerical Study

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4301
Author(s):  
Yassir A. Alamri ◽  
Saad Mahmoud ◽  
Raya Al-Dadah ◽  
Shivangi Sharma ◽  
J. N. Roy ◽  
...  
Keyword(s):  
Solar Cells ◽  
Numerical Study ◽  
Single Point ◽  
Optical Element ◽  
Fresnel Lens ◽  
Electrical Performance ◽  
High Concentration ◽  
Three Dimensional Model ◽  
Optical Efficiency ◽  
Concave Lens

This paper investigates the potential of a new integrated solar concentrated photovoltaic (CPV) system that uses a solo point focus Fresnel lens for multiple multi-junction solar cells (MJSCs). The proposed system comprises of an FL concentrator as the primary optical element, a multi-leg homogeniser as the secondary optical element (SOE), a plano-concave lens, and four MJSCs. A three-dimensional model of this system was developed using the ray tracing method to predict the influence of aperture width, height, and position with respect to MJSCs of different reflective and refractive SOE on the overall optical efficiency of the system and the irradiance uniformity achieved on the MJSCs’ surfaces. The results show that the refractive homogeniser using N-BK7 glass can achieve higher optical efficiency (79%) compared to the reflective homogeniser (57.5%). In addition, the peak to average ratio of illumination at MJSCs for the reflective homogeniser ranges from 1.07 to 1.14, while for the refractive homogeniser, it ranges from 1.06 to 1.34, causing minimum effects on the electrical performance of the MJSCs. The novelty of this paper is the development of a high concentration CPV system that integrates multiple MJSCs with a uniform distribution of rays, unlike the conventional CPV systems that utilise a single concentrator onto a single MJSC. The optical efficiency of the CPV system was also examined using both the types of homogeniser (reflective and refractive).

scholarly journals A Side-Absorption Concentrated Module with a Diffractive Optical Element as a Spectral-Beam-Splitter for a Hybrid-Collecting Solar System

Energies ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 192
Author(s):  
An-Chi Wei ◽  
Wei-Jie Chang ◽  
Jyh-Rou Sze
Keyword(s):  
Fill Factor ◽  
Beam Splitter ◽  
Light Guide ◽  
Solar Spectrum ◽  
Optical Element ◽  
Grating Period ◽  
Infrared Light ◽  
Solar Systems ◽  
Module Efficiency ◽  
Energy Conversion Devices

In this paper, we propose a side-absorption concentrated module with diffractive grating as a spectral-beam-splitter to divide sunlight into visible and infrared parts. The separate solar energy can be applied to different energy conversion devices or diverse applications, such as hybrid PV/T solar systems and other hybrid-collecting solar systems. Via the optimization of the geometric parameters of the diffractive grating, such as the grating period and height, the visible and the infrared bands can dominate the first and the zeroth diffraction orders, respectively. The designed grating integrated with the lens and the light-guide forms the proposed module, which is able to export visible and infrared light individually. This module is demonstrated in the form of an array consisting of seven units, successfully out-coupling the spectral-split beams by separate planar ports. Considering the whole solar spectrum, the simulated and measured module efficiencies of this module were 45.2% and 34.8%, respectively. Analyses of the efficiency loss indicated that the improvement of the module efficiency lies in the high fill-factor lens array, the high-reflectance coating, and less scattering.

Sign in / Sign up

Export Citation Format

Share Document