Mass-transport fabrication of large-numerical-aperture micro-optics

1995 ◽  
Author(s):  
Zong-Long Liau
Keyword(s):  
Mass Transport ◽  
Numerical Aperture ◽  
Micro Optics

Large‐numerical‐aperture InP lenslets by mass transport

1988 ◽  
Vol 52 (22) ◽  
pp. 1859-1861 ◽  
Author(s):  
Z. L. Liau ◽  
V. Diadiuk ◽  
J. N. Walpole ◽  
D. E. Mull
Keyword(s):  
Mass Transport ◽  
Numerical Aperture

Large‐numerical‐aperture microlens fabrication by one‐step etching and mass‐transport smoothing

1994 ◽  
Vol 64 (12) ◽  
pp. 1484-1486 ◽  
Author(s):  
Z. L. Liau ◽  
D. E. Mull ◽  
C. L. Dennis ◽  
R. C. Williamson ◽  
R. G. Waarts
Keyword(s):  
Mass Transport ◽  
Numerical Aperture ◽  
One Step

Models of Thermodynamic Properties of Prominences

1979 ◽  
Vol 44 ◽  
pp. 349-355
Author(s):  
R.W. Milkey
Keyword(s):  
Thermodynamic Properties ◽  
Mass Transport ◽  
Emission Spectrum ◽  
Thermodynamic Parameters ◽  
Working Group ◽  
Physical Processes ◽  
Theoretical Concepts ◽  
Group 3 ◽  
Observational Techniques

The focus of discussion in Working Group 3 was on the Thermodynamic Properties as determined spectroscopically, including the observational techniques and the theoretical modeling of physical processes responsible for the emission spectrum. Recent advances in observational techniques and theoretical concepts make this discussion particularly timely. It is wise to remember that the determination of thermodynamic parameters is not an end in itself and that these are interesting chiefly for what they can tell us about the energetics and mass transport in prominences.

Video-Enhanced Microscopy--Better Visibility of Plant Cell Structures

1982 ◽  
Vol 40 ◽  
pp. 182-185
Author(s):  
N.S. Allen ◽  
R.D. Allen
Keyword(s):  
Diffraction Pattern ◽  
Theoretical Basis ◽  
Numerical Aperture ◽  
Gain Control ◽  
Control Unit ◽  
Camera Control ◽  
Variable Gain ◽  
Contrast Method ◽  
Fine Detail ◽  
Cell Structures

Various methods of video-enhanced microscopy combine TV cameras with light microscopes creating images with improved resolution, contrast and visibility of fine detail, which can be recorded rapidly and relatively inexpensively. The AVEC (Allen Video-enhanced Contrast) method avoids polarizing rectifiers, since the microscope is operated at retardations of λ/9- λ/4, where no anomaly is seen in the Airy diffraction pattern. The iris diaphram is opened fully to match the numerical aperture of the condenser to that of the objective. Under these conditions, no image can be realized either by eye or photographically. Yet the image becomes visible using the Hamamatsu C-1000-01 binary camera, if the camera control unit is equipped with variable gain control and an offset knob (which sets a clamp voltage of a D.C. restoration circuit). The theoretical basis for these improvements has been described.

On resolving fine periodic microstructures in the optical microscope

1989 ◽  
Vol 47 ◽  
pp. 364-365
Author(s):  
W.S. Putnam ◽  
C. Viney
Keyword(s):  
Liquid Crystalline ◽  
Numerical Aperture ◽  
Polarized Light ◽  
Normal Incidence ◽  
Optical Microscope ◽  
Angle Of Incidence ◽  
Resolution Limit ◽  
Crystalline Materials ◽  
Periodic Microstructures ◽  
Liquid Crystalline Materials

Many sheared liquid crystalline materials (fibers, films and moldings) exhibit a fine banded microstructure when observed in the polarized light microscope. In some cases, for example Kevlar® fiber, the periodicity is close to the resolution limit of even the highest numerical aperture objectives. The periodic microstructure reflects a non-uniform alignment of the constituent molecules, and consequently is an indication that the mechanical properties will be less than optimal. Thus it is necessary to obtain quality micrographs for characterization, which in turn requires that fine detail should contribute significantly to image formation.It is textbook knowledge that the resolution achievable with a given microscope objective (numerical aperture NA) and a given wavelength of light (λ) increases as the angle of incidence of light at the specimen surface is increased. Stated in terms of the Abbe resolution criterion, resolution improves from λ/NA to λ/2NA with increasing departure from normal incidence.

Performance Evaluation of a Novel Type of Low-Energy Electron Microscope

1990 ◽  
Vol 48 (1) ◽  
pp. 354-355
Author(s):  
Bertholdand Senftinger ◽  
Helmut Liebl
Keyword(s):  
Electron Microscope ◽  
High Resolution ◽  
Field Strength ◽  
Numerical Aperture ◽  
Low Energy ◽  
Energy Electron ◽  
High Resolution Imaging ◽  
Lens System ◽  
Resolution Imaging ◽  
Low Energy Electron

During the last few years the investigation of clean and adsorbate-covered solid surfaces as well as thin-film growth and molecular dynamics have given rise to a constant demand for high-resolution imaging microscopy with reflected and diffracted low energy electrons as well as photo-electrons. A recent successful implementation of a UHV low-energy electron microscope by Bauer and Telieps encouraged us to construct such a low energy electron microscope (LEEM) for high-resolution imaging incorporating several novel design features, which is described more detailed elsewhere.The constraint of high field strength at the surface required to keep the aberrations caused by the accelerating field small and high UV photon intensity to get an improved signal-to-noise ratio for photoemission led to the design of a tetrode emission lens system capable of also focusing the UV light at the surface through an integrated Schwarzschild-type objective. Fig. 1 shows an axial section of the emission lens in the LEEM with sample (28) and part of the sample holder (29). The integrated mirror objective (50a, 50b) is used for visual in situ microscopic observation of the sample as well as for UV illumination. The electron optical components and the sample with accelerating field followed by an einzel lens form a tetrode system. In order to keep the field strength high, the sample is separated from the first element of the einzel lens by only 1.6 mm. With a numerical aperture of 0.5 for the Schwarzschild objective the orifice in the first element of the einzel lens has to be about 3.0 mm in diameter. Considering the much smaller distance to the sample one can expect intense distortions of the accelerating field in front of the sample. Because the achievable lateral resolution depends mainly on the quality of the first imaging step, careful investigation of the aberrations caused by the emission lens system had to be done in order to avoid sacrificing high lateral resolution for larger numerical aperture.

Microspectroscopy Using a Solid Immersion Lens

2001 ◽  
Vol 7 (S2) ◽  
pp. 148-149
Author(s):  
C.D. Poweleit ◽  
J Menéndez
Keyword(s):  
Spatial Resolution ◽  
Focal Plane ◽  
Numerical Aperture ◽  
Normal Incidence ◽  
Spot Size ◽  
Index Of Refraction ◽  
Objective Lens ◽  
Improvement Factor ◽  
Oil Immersion ◽  
Long Time

Oil immersion lenses have been used in optical microscopy for a long time. The light’s wavelength is decreased by the oil’s index of refraction n and this reduces the minimum spot size. Additionally, the oil medium allows a larger collection angle, thereby increasing the numerical aperture. The SIL is based on the same principle, but offers more flexibility because the higher index material is solid. in particular, SILs can be deployed in cryogenic environments. Using a hemispherical glass the spatial resolution is improved by a factor n with respect to the resolution obtained with the microscope’s objective lens alone. The improvement factor is equal to n2 for truncated spheres.As shown in Fig. 1, the hemisphere SIL is in contact with the sample and does not affect the position of the focal plane. The focused rays from the objective strike the lens at normal incidence, so that no refraction takes place.

Sign in / Sign up

Export Citation Format

Share Document