Design of high-brightness TEM00-mode solar-pumped laser for renewable material processing

There is great interest in improving the brightness of electron sources and therefore the ability of electron optical instrumentation to probe the properties of materials. Extensive work by Dr. Crew and others has provided extremely high brightness sources for certain kinds of analytical problems but which pose serious difficulties in other problems. These sources cannot survive in conventional system vacuums. If one wishes to gather information from the other signal channels activated by electron beam bombardment it is necessary to provide sufficient current to allow an acceptable signal-to-noise ratio. It is possible through careful design to provide a high brightness field emission source which has the capability of providing high currents as well as high current densities to a specimen. In this paper we describe an electrode to provide long-lived stable current in field emission sources.The source geometry was based upon the results of extensive computer modeling. The design attempted to maximize the total current available at a specimen.

Download Full-text

Optical Properties of HVEM Accelerators

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100114529 ◽

1975 ◽

Vol 33 ◽

pp. 180-181

Author(s):

A. Strojnik ◽

J.W. Scholl ◽

V. Bevc

Keyword(s):

Optical Properties ◽

Electron Accelerator ◽

Systematic Investigation ◽

Electron Source ◽

High Brightness ◽

The Past ◽

Wide Range ◽

Optical Behavior

The electron accelerator, as inserted between the electron source (injector) and the imaging column of the HVEM, is usually a strong lens and should be optimized in order to ensure high brightness over a wide range of accelerating voltages and illuminating conditions. This is especially true in the case of the STEM where the brightness directly determines the highest resolution attainable. In the past, the optical behavior of accelerators was usually determined for a particular configuration. During the development of the accelerator for the Arizona 1 MEV STEM, systematic investigation was made of the major optical properties for a variety of electrode configurations, number of stages N, accelerating voltages, 1 and 10 MEV, and a range of injection voltages ϕ0 = 1, 3, 10, 30, 100, 300 kV).

Download Full-text

Characteristics and Application of Temperature-Field Emitters

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100114347 ◽

1975 ◽

Vol 33 ◽

pp. 144-145

Author(s):

N. Tamura ◽

T. Goto ◽

Y. Harada

Keyword(s):

Temperature Field ◽

Electron Microscope ◽

Field Emission ◽

Resolving Power ◽

High Brightness ◽

Field Emitters ◽

Emission Electron ◽

Sufficient Stability ◽

Scanning Electron ◽

Illuminating System

On account of its high brightness, the field emission electron source has the advantage that it provides the conventional electron microscope with highly coherent illuminating system and that it directly improves the, resolving power of the scanning electron microscope. The present authors have reported some results obtained with a 100 kV field emission electron microscope.It has been proven, furthermore, that the tungsten emitter as a temperature field emission source can be utilized with a sufficient stability under a modest vacuum of 10-8 ~ 10-9 Torr. The present paper is concerned with an extension of our study on the characteristics of the temperature field emitters.

Download Full-text