Progressive scan interline transfer CCD camera

1995 ◽  
Author(s):  
Toshi Hori
Keyword(s):  
Ccd Camera ◽  
Progressive Scan

scholarly journals Characterization of a Commercial, Front-Illuminated Interline Transfer CCD Camera for use as a Guide Camera on a Balloon-Borne Telescope

2014 ◽  
Vol 03 (02) ◽  
pp. 1440003 ◽  
Author(s):  
Paul Clark ◽  
Richard Massey ◽  
Herrick L. Chang ◽  
Mathew Galloway ◽  
Holger Israel ◽  
...  
Keyword(s):  
High Altitude ◽  
Closed Loop ◽  
Ccd Camera ◽  
Microlens Array ◽  
Tilt Correction ◽  
Temperature And Pressure ◽  
Progressive Scan ◽  
Correction System ◽  
Better Than

We report results obtained during the characterization of a commercial front-illuminated progressive scan interline transfer CCD camera. We demonstrate that the unmodified camera operates successfully in temperature and pressure conditions (-40°C, 4 mBar) representative of a high altitude balloon mission. We further demonstrate that the centroid of a well-sampled star can be determined to better than 2% of a pixel, even though the CCD is equipped with a microlens array. This device has been selected for use in a closed-loop star-guiding and tip-tilt correction system in the BIT-STABLE balloon mission.

scholarly journals Progressive-Scan CCD Camera and Motion Picture Recording System for High Resolution Visualized Image Capturing

1999 ◽  
Vol 19 (Supplement2) ◽  
pp. 61-64
Author(s):  
Taketoshi Iyota ◽  
Hiroshi Toya ◽  
Kunio Baba ◽  
Yoshio Ishii ◽  
Kazuhiro Watanabe ◽  
...  
Keyword(s):  
High Resolution ◽  
Motion Picture ◽  
Ccd Camera ◽  
Recording System ◽  
Image Capturing ◽  
Progressive Scan

The Fox Movietone News Preservation Project: The Progressive Scan CCD Camera

SMPTE Journal ◽  
1996 ◽  
Vol 105 (9) ◽  
pp. 551-554 ◽  
Author(s):  
Ray Bouvy ◽  
John Vincent ◽  
Ken Parulski ◽  
Kris Balch ◽  
Gary Erickson ◽  
...  
Keyword(s):  
Ccd Camera ◽  
Progressive Scan

Brief summary of Kleť photographic search programme for minor planets

1999 ◽  
Vol 173 ◽  
pp. 189-192
Author(s):  
J. Tichá ◽  
M. Tichý ◽  
Z. Moravec
Keyword(s):  
Ccd Camera ◽  
Minor Planet ◽  
Minor Planets ◽  
Main Belt

AbstractA long-term photographic search programme for minor planets was begun at the Kleť Observatory at the end of seventies using a 0.63-m Maksutov telescope, but with insufficient respect for long-arc follow-up astrometry. More than two thousand provisional designations were given to new Kleť discoveries. Since 1993 targeted follow-up astrometry of Kleť candidates has been performed with a 0.57-m reflector equipped with a CCD camera, and reliable orbits for many previous Kleť discoveries have been determined. The photographic programme results in more than 350 numbered minor planets credited to Kleť, one of the world's most prolific discovery sites. Nearly 50 per cent of them were numbered as a consequence of CCD follow-up observations since 1994.This brief summary describes the results of this Kleť photographic minor planet survey between 1977 and 1996. The majority of the Kleť photographic discoveries are main belt asteroids, but two Amor type asteroids and one Trojan have been found.

Zero-loss omega-filtered REM and RHEED on the new Zeiss 912

1991 ◽  
Vol 49 ◽  
pp. 616-617
Author(s):  
J.C.H. Spence ◽  
J. Mayer
Keyword(s):  
Electron Microscopy ◽  
Materials Science ◽  
Surface States ◽  
Ccd Camera ◽  
Dark Field ◽  
Ion Pump ◽  
Magnetic Imaging ◽  
Reflection Electron Microscopy ◽  
Diffraction Patterns ◽  
Large Background

The Zeiss 912 is a new fully digital, side-entry, 120 Kv TEM/STEM instrument for materials science, fitted with an omega magnetic imaging energy filter. Pumping is by turbopump and ion pump. The magnetic imaging filter allows energy-filtered images or diffraction patterns to be recorded without scanning using efficient parallel (area) detection. The energy loss intensity distribution may also be displayed on the screen, and recorded by scanning it over the PMT supplied. If a CCD camera is fitted and suitable new software developed, “parallel ELS” recording results. For large fields of view, filtered images can be recorded much more efficiently than by Scanning Reflection Electron Microscopy, and the large background of inelastic scattering removed. We have therefore evaluated the 912 for REM and RHEED applications. Causes of streaking and resonance in RHEED patterns are being studied, and a more quantitative analysis of CBRED patterns may be possible. Dark field band-gap REM imaging of surface states may also be possible.

Automated electron tomography: from data collection to image processing

1995 ◽  
Vol 53 ◽  
pp. 26-27
Author(s):  
Weiping Liu ◽  
Jennifer Fung ◽  
W.J. de Ruijter ◽  
Hans Chen ◽  
John W. Sedat ◽  
...  
Keyword(s):  
Image Processing ◽  
Data Collection ◽  
Structural Information ◽  
Imaging Technique ◽  
Electron Tomography ◽  
Ccd Camera ◽  
Automated Data Collection ◽  
Full Control ◽  
Transmission Electron ◽  
Amorphous Structures

Electron tomography is a technique where many projections of an object are collected from the transmission electron microscope (TEM), and are then used to reconstruct the object in its entirety, allowing internal structure to be viewed. As vital as is the 3-D structural information and with no other 3-D imaging technique to compete in its resolution range, electron tomography of amorphous structures has been exercised only sporadically over the last ten years. Its general lack of popularity can be attributed to the tediousness of the entire process starting from the data collection, image processing for reconstruction, and extending to the 3-D image analysis. We have been investing effort to automate all aspects of electron tomography. Our systems of data collection and tomographic image processing will be briefly described.To date, we have developed a second generation automated data collection system based on an SGI workstation (Fig. 1) (The previous version used a micro VAX). The computer takes full control of the microscope operations with its graphical menu driven environment. This is made possible by the direct digital recording of images using the CCD camera.

Designing high-resolution slow scan CCD-based TEM camera systems

1992 ◽  
Vol 50 (2) ◽  
pp. 946-947
Author(s):  
James F. Mancuso ◽  
William B. Maxwell ◽  
Russell E. Camp ◽  
Mark H. Ellisman
Keyword(s):  
Fiber Optics ◽  
Ccd Camera ◽  
High Energy ◽  
Phosphor Layer ◽  
X Ray ◽  
Light Production ◽  
Camera Systems ◽  
X Ray Imaging ◽  
Electron Image ◽  
Scintillating Fiber

The imaging requirements for 1000 line CCD camera systems include resolution, sensitivity, and field of view. In electronic camera systems these characteristics are determined primarily by the performance of the electro-optic interface. This component converts the electron image into a light image which is ultimately received by a camera sensor.Light production in the interface occurs when high energy electrons strike a phosphor or scintillator. Resolution is limited by electron scattering and absorption. For a constant resolution, more energy deposition occurs in denser phosphors (Figure 1). In this respect, high density x-ray phosphors such as Gd2O2S are better than ZnS based cathode ray tube phosphors. Scintillating fiber optics can be used instead of a discrete phosphor layer. The resolution of scintillating fiber optics that are used in x-ray imaging exceed 20 1p/mm and can be made very large. An example of a digital TEM image using a scintillating fiber optic plate is shown in Figure 2.

Merging of electron-diffraction intensities acquired with a slow-scan CCD camera of crotoxin complex crystals to 3.5Å resolution

1994 ◽  
Vol 52 ◽  
pp. 104-105
Author(s):  
Jaap Brink ◽  
Wah Chiu
Keyword(s):  
Electron Diffraction ◽  
Ccd Camera ◽  
Crystal Thickness ◽  
Local Contrast ◽  
Camera Model ◽  
Data Set ◽  
3 Dimensional ◽  
Diffraction Mode ◽  
Diffraction Patterns ◽  
Complex Crystals

Crotoxin complex is the principal neurotoxin of the South American rattlesnake, Crotalus durissus terrificus and has a molecular weight of 24 kDa. The protein is a heterodimer with subunit A assigneda chaperone function. Subunit B carries the lethal activity, which is exerted on both sides ofthe neuro-muscular junction, and which is thought to involve binding to the acetylcholine receptor. Insight in crotoxin complex’ mode of action can be gained from a 3 Å resolution structure obtained by electron crystallography. This abstract communicates our progress in merging the electron diffraction amplitudes into a 3-dimensional (3D) intensity data set close to completion. Since the thickness of crotoxin complex crystals varies from one crystal to the other, we chose to collect tilt series of electron diffraction patterns after determining their thickness. Furthermore, by making use of the symmetry present in these tilt data, intensities collected only from similar crystals will be merged.Suitable crystals of glucose-embedded crotoxin complex were searched for in the defocussed diffraction mode with the goniometer tilted to 55° of higher in a JEOL4000 electron cryo-microscopc operated at 400 kV with the crystals kept at -120°C in a Gatan 626 cryo-holder. The crystal thickness was measured using the local contrast of the crystal relative to the supporting film from search-mode images acquired using a 1024 x 1024 slow-scan CCD camera (model 679, Gatan Inc.).

Spot-scan imaging of ice-embedded catalase crystal on a slow-scan CCD camera in a 400-kV electron cryomicroscope

1994 ◽  
Vol 52 ◽  
pp. 98-99
Author(s):  
Wah Chiu ◽  
Michael Sherman ◽  
Jaap Brink
Keyword(s):  
Electron Diffraction ◽  
Ccd Camera ◽  
Protein Crystal ◽  
Modulation Transfer ◽  
Measured Intensity ◽  
3 Dimensional ◽  
Dimensional Reconstruction ◽  
Diffraction Patterns ◽  
Complex Crystal

In protein electron crystallography, both low dose electron diffraction patterns and images are needed to provide accurate amplitudes and phases respectively for a 3-dimensional reconstruction. We have demonstrated that the Gatan 1024x1024 model 679 slow-scan CCD camera is useful to record electron diffraction intensities of glucose-embedded crotoxin complex crystal to 3 Å resolution. The quality of the electron diffraction intensities is high on the basis of the measured intensity equivalence ofthe Friedel-related reflections. Moreover, the number of patterns recorded from a single crystal can be as high as 120 under the constraints of radiation damage and electron statistics for the reflections in each pattern.A limitation of the slow-scan CCD camera for recording electron images of protein crystal arises from the relatively large pixel size, i.e. 24 μm (provided by Gatan). The modulation transfer function of our camera with a P43 scintillator has been determined for 400 keV electrons and shows an amplitude fall-off to 0.25 at 1/60 μm−1.

Use of digital microscopy in process control during the manufacture of rubber-modified thermoplastics

1996 ◽  
Vol 54 ◽  
pp. 616-617
Author(s):  
M. T. Dineen
Keyword(s):  
Ccd Camera ◽  
Operating Costs ◽  
Hard Copy ◽  
Production Plant ◽  
Digital Microscopy ◽  
Nih Image ◽  
Transmission Electron ◽  
Conventional Film ◽  
Product Loss ◽  
Image Collection

The production of rubber modified thermoplastics can exceed rates of 30,000 pounds per hour. If a production plant needs to equilibrate or has an upset, that means operating costs and lost revenue. Results of transmission electron microscopy (TEM) can be used for process adjustments to minimize product loss. Conventional TEM, however, is not a rapid turnaround technique. The TEM process was examined, and it was determined that 50% of the time it took to complete a polymer sample was related to film processing, even when using automated equipment. By replacing the conventional film portion of the process with a commercially available system to digitally acquire the TEM image, a production plant can have the same TEM image in the control room within 1.5 hours of sampling.A Hitachi H-600 TEM Operated at 100 kV with a tungsten filament was retrofitted with a SEMICAPS™ image collection and processing workstation and a KODAK MEGAPLUS™ charged coupled device (CCD) camera (Fig. 1). Media Cybernetics Image-Pro Plus software was included, and connections to a Phaser II SDX printer and the network were made. Network printers and other PC and Mac software (e.g. NIH Image) were available. By using digital acquisition and processing, the time it takes to produce a hard copy of a digital image is greatly reduced compared to the time it takes to process film.

Sign in / Sign up

Export Citation Format

Share Document