Model for friction and wear reduction through piezoelectrically assisted ultrasonic lubrication

2014 ◽  
Author(s):  
Sheng Dong ◽  
Marcelo J. Dapino
Keyword(s):  
Friction And Wear ◽  
Wear Reduction ◽  
Ultrasonic Lubrication

scholarly journals Investigation of the Tribological Performances of Graphene and WS2 Nanosheets as Additives for Perfluoroalkylpolyethers Under Simulated Space Environment

2021 ◽  
Vol 69 (2) ◽  
Author(s):  
Jia Ren ◽  
Kuiliang Gong ◽  
Gaiqing Zhao ◽  
Wenjing Lou ◽  
Xinhu Wu ◽  
...  
Keyword(s):  
Amorphous Carbon ◽  
Atomic Oxygen ◽  
Friction And Wear ◽  
Surface Oxidation ◽  
Space Environment ◽  
Composition And Structure ◽  
Before And After ◽  
Wear Reduction ◽  
Ws2 Nanosheets ◽  
Effects Of Irradiation On

AbstractThe tribological performances of perfluoroalkylpolyethers (PFPE) with graphene (Gr), WS2, and the mixture of Gr and WS2 (Gr + WS2) before and after ultraviolet (UV), atomic oxygen (AO), and proton (Pr) irradiations were investigated. The composition and structure of PFPE, Gr, WS2, and Gr + WS2 were also analyzed to understand the effects of irradiation on the tribological behaviors of PFPE with additives. The results indicated that serious deterioration and degradation of PFPE took place and Gr was transformed to amorphous carbon after Pr irradiation, and surface oxidation of WS2 occurred under the irradiations of AO and Pr. Moreover, compared to PFPE and PFPE additized with Gr and WS2, PFPE with the addition of Gr + WS2 exhibited excellent friction and wear reduction before and after UV and AO irradiations. Graphical Abstract

scholarly journals Tribological Behaviour of Graphene Nanoplatelets as Additive in Pongamia Oil

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 732
Author(s):  
Yeoh Jun Jie Jason ◽  
Heoy Geok How ◽  
Yew Heng Teoh ◽  
Farooq Sher ◽  
Hun Guan Chuah ◽  
...  
Keyword(s):  
Friction And Wear ◽  
Graphene Nanoplatelets ◽  
Friction Reduction ◽  
Engine Oil ◽  
Protective Film ◽  
Tribological Behaviour ◽  
Wear Reduction ◽  
Pongamia Oil ◽  
Interacting Surfaces ◽  
Worn Surface

This study investigated the tribological behaviour of Pongamia oil (PO) and 15W–40 mineral engine oil (MO) with and without the addition of graphene nanoplatelets (GNPs). The friction and wear characteristics were evaluated in four-ball anti-wear tests according to the ASTM D4172 standard. The morphology of worn surfaces and the lubrication mechanism of GNPs were investigated via SEM and EDS. This study also focuses on the tribological effect of GNP concentration at various concentrations. The addition of 0.05 wt % GNPs in PO and MO exhibits the lowest friction and wear with 17.5% and 12.24% friction reduction, respectively, and 11.96% and 5.14% wear reduction, respectively. Through SEM and EDS surface analysis, the surface enhancement on the worn surface by the polishing effect of GNPs was confirmed. The deposition of GNPs on the friction surface and the formation of a protective film prevent the interacting surfaces from rubbing, resulting in friction and wear reduction.

scholarly journals Study of the Lubricating Ability of Protic Ionic Liquid on an Aluminum–Steel Contact

Lubricants ◽  
2018 ◽  
Vol 6 (3) ◽  
pp. 66 ◽  
Author(s):  
Akshar Patel ◽  
Hong Guo ◽  
Patricia Iglesias
Keyword(s):  
Ionic Liquid ◽  
Friction And Wear ◽  
Constant Load ◽  
Economic Losses ◽  
Contact Friction ◽  
Wear Volume ◽  
Sliding Velocity ◽  
Protic Ionic Liquid ◽  
Wear Reduction ◽  
Pin On Disk

Contact friction between moving components leads to severe wear and failure of engineering parts, resulting in large economic losses. The lubricating ability of the protic ionic liquid, tri-[bis(2-hydroxyethylammonium)] citrate (DCi), was studied as a neat lubricant and as an additive in a mineral oil (MO) at various sliding velocities and constant load on an aluminum–steel contact using a pin-on-disk tribometer. Tribological tests were also performed at different concentrations of DCi. When DCi was used as an additive in MO, friction coefficient and wear volume were reduced for each sliding velocity, with a maximum friction and wear reduction of 16% and 40%, respectively, when 2 wt % DCi was added to MO at a sliding velocity of 0.15 m/s. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) were also applied to analyze the wear mechanism of the interface lubricated by MO and DCi as additive.

Friction and Wear Reduction of 440C Stainless Steel by Ion Implantation

1983 ◽  
Vol 27 ◽  
Author(s):  
L. E. Pope ◽  
F. G. Yost ◽  
D. M. Follstaedt ◽  
S.T. Picraux ◽  
J. A. Knapp
Keyword(s):  
Stainless Steel ◽  
Surface Layer ◽  
Yield Strength ◽  
Ion Implantation ◽  
Friction And Wear ◽  
No Reduction ◽  
Wear Reduction ◽  
Amorphous Surface ◽  
Wear Tests ◽  
Friction And Wear Tests

ABSTRACTFriction and wear tests on ion-implanted 440C stainless steel discs have been extended to high Hertzian stresses (≤ 3150 MPa). Implantation of 2 × 1015 Ti/mm2 (180–90 keV) and 2 × 1015 C/mm2 (30 keV) into 440C reduces friction (∼40%) and wear (> 80%) for Hertzian stresses as large as 2900 MPa, stresses which significantly exceed the yield strength of 440C (∼1840 MPa). Implantation of 4 × 1015 N/mm2 (50 keV) into 440C reduces friction slightly (∼25%) for Hertzian stresses > 1840 MPa but provides little or no reduction in wear. The amount of Ti remaining in the wear tracks correlates with the reductions in friction and wear. The implantation of Ti and C produces an amorphous surface layer which is believed to reduce friction and wear, whereas N implantation is expected to produce hard nitride particles which probably do not modify the hardness of 440C (KHN = 789) significantly.

scholarly journals Multi-Phase Friction and Wear Reduction by Copper Nanopartices

Lubricants ◽  
2016 ◽  
Vol 4 (4) ◽  
pp. 36 ◽  
Author(s):  
Matthias Scherge ◽  
Roman Böttcher ◽  
Dominik Kürten ◽  
Dominic Linsler
Keyword(s):  
Friction And Wear ◽  
Wear Reduction ◽  
Multi Phase

Friction and Wear Reduction of Engine Bearings with Solid Lubricant Overlay

2014 ◽  
Author(s):  
Toshiyuki Chitose ◽  
Shu Kamiya ◽  
Yasunori Kabeya ◽  
Toru Desaki
Keyword(s):  
Friction And Wear ◽  
Solid Lubricant ◽  
Wear Reduction

Significant friction and wear reduction by assembling two individual PEEK composites with specific functionalities

2017 ◽  
Vol 116 ◽  
pp. 152-159 ◽  
Author(s):  
Guitao Li ◽  
Huimin Qi ◽  
Ga Zhang ◽  
Fuyan Zhao ◽  
Tingmei Wang ◽  
...  
Keyword(s):  
Friction And Wear ◽  
Wear Reduction

scholarly journals Bioinspired polymer microstructures for directional transport of oily liquids

2017 ◽  
Vol 4 (3) ◽  
pp. 160849 ◽  
Author(s):  
C. Plamadeala ◽  
F. Hischen ◽  
R. Friesenecker ◽  
R. Wollhofen ◽  
J. Jacak ◽  
...  
Keyword(s):  
Friction And Wear ◽  
Technical Problems ◽  
Oil Transport ◽  
Two Photon ◽  
Liquid Front ◽  
Polymer Microstructures ◽  
Wear Reduction ◽  
The Right ◽  
Directional Transport ◽  
Two Photon Polymerization

Nature has always served as an inspiration for scientists, helping them to solve a large diversity of technical problems. In our case, we are interested in the directional transport of oily liquids and as a model for this application we used the flat bug Dysodius lunatus . In this report, we present arrays of drops looking like polymer microstructures produced by the two-photon polymerization technique that mimic the micro-ornamentation from the bug's cuticle. A good directionality of oil transport was achieved, directly controlled by the direction of the pointed microstructures at the surface. If the tips of the drop-like microstructures are pointing towards the left side, the liquid front moves to the right and vice versa. Similar effects could be expected for the transport of oily lubricants. These results could, therefore, be interesting for applications in friction and wear reduction.

Sign in / Sign up

Export Citation Format

Share Document