Early-age concrete strength estimation based on piezoelectric sensor using artificial neural network

2014 ◽  
Author(s):  
Junkyeong Kim ◽  
Ju-Won Kim ◽  
Seunghee Park
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Concrete Strength ◽  
Piezoelectric Sensor ◽  
Early Age ◽  
Artificial Neural ◽  
Early Age Concrete

Non-invasive intelligent monitoring system for fault detection in induction motor based on bio piezoelectric sensor using ANN

2022 ◽  
Author(s):  
Massine GANA ◽  
Hakim ACHOUR ◽  
Kamel BELAID ◽  
Zakia CHELLI ◽  
Mourad LAGHROUCHE ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Induction Motor ◽  
Vibration Analysis ◽  
Low Cost ◽  
Piezoelectric Sensor ◽  
Integrated System ◽  
Easy Access ◽  
Non Invasive ◽  
Artificial Neural

Abstract This paper presents a design of a low-cost integrated system for the preventive detection of unbalance faults in an induction motor. In this regard, two non-invasive measurements have been collected then monitored in real time and transmitted via an ESP32 board. A new bio-flexible piezoelectric sensor developed previously in our laboratory, was used for vibration analysis. Moreover an infrared thermopile was used for non-contact temperature measurement. The data is transmitted via Wi-Fi to a monitoring station that intervenes to detect an anomaly. The diagnosis of the motor condition is realized using an artificial neural network algorithm implemented on the microcontroller. Besides, a Kalman filter is employed to predict the vibrations while eliminating the noise. The combination of vibration analysis, thermal signature analysis and artificial neural network provides a better diagnosis. It ensures efficiency, accuracy, easy access to data and remote control, which significantly reduces human intervention.

A comparative study of concrete strength prediction using artificial neural network, multigene programming and model tree

2019 ◽  
Vol 5 (2) ◽  
pp. 42
Author(s):  
Preeti Kulkarni ◽  
Shreenivas N. Londhe ◽  
Pradnya R. Dixit
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Concrete Strength ◽  
Model Performance ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Model Tree ◽  
Multigene Genetic Programming ◽  
Input Parameters ◽  
Artificial Neural

In the current study 28 day strength of Recycled Aggregate Concrete (RAC) and Fly ash (class F) based concrete is predicted using Artificial Neural Network (ANN), Multigene Genetic Programming (MGGP) and Model Tree (MT). Four sets of models were designed for per cubic proportions of materials, Properties of materials and non-dimensional parameters as input parameters. The study shows that the predicted 28 day strength is in good agreement with the observed data and also generalize well to untrained data. ANN outperforms MGGP and MT in terms of model performance. Output of the developed models can be presented in terms of trained weights and biases in ANN, equations in MGGP and in the form of series of equations in MT. ANN, MGGP and MT can grasp the influence of input parameters which can be seen through Hinton diagrams in ANN, input frequency distribution in MGGP and coefficients of input parameters in MT. The study shows that these data driven techniques can be used for developing model/s to predict strength of concrete with an acceptable performance.

Concrete strength prediction using artificial neural network and genetic programming

2018 ◽  
Vol 9 (3) ◽  
pp. 75
Author(s):  
Preeti Kulkarni ◽  
Shreenivas N. Londhe
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Genetic Programming ◽  
Construction Material ◽  
Concrete Strength ◽  
Maximum Size ◽  
Design Parameters ◽  
Ann Model ◽  
Influencing Parameters ◽  
Artificial Neural

Concrete is a highly complex composite construction material and modeling using computing tools to predict concrete strength is a difficult task. In this work an effort is made to predict compressive strength of concrete after 28 days of curing, using Artificial Neural Network (ANN) and Genetic programming (GP). The data for analysis mainly consists of mix design parameters of concrete, coefficient of soft sand and maximum size of aggregates as input parameters. ANN yields trained weights and biases as the final model which sometime may impediment in its application at operational level. GP on other hand yields an equation as its output making its plausible tool for operational use. Comparison of the prediction results displays the result the model accuracy of both ANN and GP as satisfactory, giving GP a working advantage owing to its output in an equation form. A knowledge extraction technique used with the weights and biases of ANN model to understand the most influencing parameters to predict the 28 day strength of concrete, promises to prove ANN as grey box rather than a black box. GP models, in form of explicit equations, show the influencing parameters with reference to the presence of the relevant parameters in the equations.

scholarly journals Shear Resistance Prediction of Post-fire Reinforced Concrete Beams Using Artificial Neural Network

2019 ◽  
Vol 13 (1) ◽  
Author(s):  
Bin Cai ◽  
Long-Fei Xu ◽  
Feng Fu
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Reinforced Concrete ◽  
Concrete Strength ◽  
Shear Resistance ◽  
Reinforced Concrete Beams ◽  
Rc Beams ◽  
Residual Shear Strength ◽  
Element Analysis ◽  
Artificial Neural

Abstract In this paper, a prediction method based on artificial neural network was developed to rapidly determine the residual shear resistance of reinforced concrete (RC) beams after fire. Firstly, the temperature distribution along the beam section was determined through finite element analysis using software ABAQUS. A residual shear strength calculation model was developed and validated using the test data. Using this model, 384 data entries were derived for training and testing. The input layer of neural network involved parameters of beam height, beam width, fire exposure time, cross-sectional area of stirrup, stirrup spacing, concrete strength, and concrete cover thickness. The output was the shear resistance of RC beams. It was found that use of BP neural network could precisely predict the post-fire shear resistance of RC beams. The predicted data were highly consistent with the target data. Thus, this is a novel method for computing post-fire shear resistance of RC beams. Using this new method, further investigation was also made on the effects of different parameters on the shear resistance of the beams.

scholarly journals Piezoelectric Active Sensor Self-Diagnosis for Electromechanical Impedance Monitoring Using K-Means Clustering Analysis and Artificial Neural Network

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Xie Jiang ◽  
Xin Zhang ◽  
Yuxiang Zhang
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Clustering Analysis ◽  
Structural Damage ◽  
Principal Component ◽  
Piezoelectric Sensor ◽  
Sensor Faults ◽  
Ann Model ◽  
Electromechanical Impedance ◽  
Artificial Neural

Piezoelectric sensor is a crucial part of electromechanical impedance technology whose state will directly affect the effectiveness and accuracy of structural health monitoring (SHM). So carrying out sensor self-diagnosis is important and necessary. However, it is still difficult to distinguish sensor faults from structural damage as well as identify the cases and degrees of sensor faults. In the study, three characteristic indexes of admittance which have different indication intervals for damages of structure and sensors were selected from six indexes after comparison. To improve the discrimination effect, three principal components (PC) were extracted by principal component analysis (PCA). And the damage information represented by PCs was clustered by the K-means algorithm to identify the cases of damage. Then, the degrees of sensor damages were classified with the artificial neural network (ANN). The results show that the K-means clustering analysis based on admittance characteristics can accurately distinguish and identify the structural damage and four kinds of sensor damages, namely, pseudosoldering, debonding, wear, and breakage. The trained ANN model has a good recognition effect on the damage degrees and the accuracy of recognition reaches 100%. This study has a certain reference value for piezoelectric sensor self-fault identification.

Axial Capacity Prediction of Concrete-Filled Steel Tubular Short Members Using Multiple Linear Regression and Artificial Neural Network

2021 ◽  
Vol 1047 ◽  
pp. 220-226
Author(s):  
Md Nasir Uddin ◽  
Ling Zhi Li ◽  
Raja Khurram Mahmood Khan ◽  
Farhan Shahriar ◽  
Landry Wilfried Tim Sob
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Concrete Strength ◽  
Ultimate Capacity ◽  
Axial Strength ◽  
Axial Capacity ◽  
Wide Range ◽  
Artificial Neural ◽  
Cft Column ◽  
Capacity Prediction

The estimation of the ultimate capacity of rectangular or circular shaped steel tubular members filled with concrete, such as columns, beams, and beam-column connections, requires a detailed structural study to be carried out. Therefore, identify the concrete strength the member subjected to axial-load only. Using the Levenberg-Marquardt artificial neural network, this paper investigates the concrete-filled steel tubular (CFT) members axial strength. 201 experimental specimens were collected from the literature to obtain the best results, and a wide range of geometric and material properties of CFT members were included. The proposed design and specimens illustrate the practicality and effectiveness of the chosen CFT column approach to classify real structural results.

Sign in / Sign up

Export Citation Format

Share Document