Measurement of mixed mode (I,II) stress intensity factors (SIFs) of an interface crack by the optical method of caustics

1993 ◽  
Author(s):  
Lyndon Edwards ◽  
H. Y. Ahmad
Keyword(s):  
Stress Intensity ◽  
Interface Crack ◽  
Stress Intensity Factors ◽  
Optical Method ◽  
Mixed Mode ◽  
Mode I ◽  
Intensity Factors

A Method to Extract Interface Stress Intensity Factors Using Interlayers

2005 ◽  
Author(s):  
Sridhar Santhanam
Keyword(s):  
Stress Intensity ◽  
Interface Crack ◽  
Stress Intensity Factors ◽  
Crack Problem ◽  
Interface Stress ◽  
Mode I ◽  
Universal Relation ◽  
Intensity Factors ◽  
Infinite Blocks

A method is presented here to extract stress intensity factors for interface cracks in plane bimaterial fracture problems. The method relies on considering a companion problem wherein a very thin elastic interlayer is artificially inserted between the two material regions of the original bimaterial problem. The crack in the companion problem is located in the middle of the interlayer with its tip located within the homogeneous interlayer material. When the thickness of the interlayer is small compared with the other length scales of the problem, a universal relation can be established between the actual interface stress intensity factors at the crack tip for the original problem and the mode I and II stress intensity factors associated with the companion problem. The universal relation is determined by formulating and solving a boundary value problem. This universal relation now allows the determination of the stress intensity factors for a generic plane interface crack problem as follows. For a given interface crack problem, the companion problem is formulated and solved using the finite element method. Mode I and II stress intensity factors are obtained using the modified virtual crack closure method. The universal relation is next used to obtain the corresponding interface stress intensity factors for the original interface crack problem. An example problem involving a finite interface crack between two semi-infinite blocks is considered for which analytical solutions exist. It is shown that the method described above provides very acceptable results.

Estimation of Mixed-Mode Stress Intensity Factors with Presence of the Confinement Parameters T-Stress and A3

2016 ◽  
Vol 18 ◽  
pp. 52-57
Author(s):  
Lahouari Fodil ◽  
Abdallah El Azzizi ◽  
Mohammed Hadj Meliani
Keyword(s):  
Stress Intensity ◽  
Stress Intensity Factors ◽  
Mixed Mode ◽  
Compact Tension ◽  
Mode I ◽  
Mode Ii ◽  
Mixed Mode Fracture ◽  
Intensity Factors ◽  
Element Analysis ◽  
T Stress

A failure criterion is proposed for ductile fracture in U-notched components under mixed mode static loading. The Compact Tension Shear (CTS) is the preferred test specimen used to determine stress intensity factor in the mode I, mode II and the mixed-mode fracture. In this work, the mode I and mode II stress intensity factors were computed for different notch ratio lengths 0.1<a/W<0.7, of the inner radius of notch 0.25mm<ρ<4mm and load orientation angles 0°<α< 90° using finite element analysis. However, a review of numerical analysis results reveals that the conventional fracture criteria with only stress intensity factors (NSIFs) Kρ first term of Williams’s solution provide different description of stress field around notch zone comparing with results introduce the second and third parameter T-stress and A3.

Sign in / Sign up

Export Citation Format

Share Document