High-precision measurement of a large-size gauge block thermal expansion coefficient

1993 ◽  
Author(s):  
YiBao Yuan ◽  
Zhen-Liang Ding ◽  
Jun Xu ◽  
Zhong Chen ◽  
Feng Yuan
1991 ◽  
Vol 1 (12) ◽  
pp. 1669-1673 ◽  
Author(s):  
Hans Gerd Evertz ◽  
Martin Hasenbusch ◽  
Mihail Marcu ◽  
Klaus Pinn ◽  
Sorin Solomon

Coatings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 153
Author(s):  
Chuen-Lin Tien ◽  
Tsai-Wei Lin

This paper proposes a measuring apparatus and method for simultaneous determination of the thermal expansion coefficient and biaxial Young’s modulus of indium tin oxide (ITO) thin films. ITO thin films simultaneously coated on N-BK7 and S-TIM35 glass substrates were prepared by direct current (DC) magnetron sputtering deposition. The thermo-mechanical parameters of ITO thin films were investigated experimentally. Thermal stress in sputtered ITO films was evaluated by an improved Twyman–Green interferometer associated with wavelet transform at different temperatures. When the heating temperature increased from 30 °C to 100 °C, the tensile thermal stress of ITO thin films increased. The increase in substrate temperature led to the decrease of total residual stress deposited on two glass substrates. A linear relationship between the thermal stress and substrate heating temperature was found. The thermal expansion coefficient and biaxial Young’s modulus of the films were measured by the double substrate method. The results show that the out of plane thermal expansion coefficient and biaxial Young’s modulus of the ITO film were 5.81 × 10−6 °C−1 and 475 GPa.


Radiocarbon ◽  
2020 ◽  
pp. 1-13
Author(s):  
Alexandra Fogtmann-Schulz ◽  
Sabrina G K Kudsk ◽  
Florian Adolphi ◽  
Christoffer Karoff ◽  
Mads F Knudsen ◽  
...  

ABSTRACT We here present a comparison of methods for the pretreatment of a batch of tree rings for high-precision measurement of radiocarbon at the Aarhus AMS Centre (AARAMS), Aarhus University, Denmark. The aim was to develop an efficient and high-throughput method able to pretreat ca. 50 samples at a time. We tested two methods for extracting α-cellulose from wood to find the most optimal for our use. One method used acetic acid, the other used HCl acid for the delignification. The testing was conducted on background 14C samples, in order to assess the effect of the different pretreatment methods on low-activity samples. Furthermore, the extracted wood and cellulose fractions were analyzed using Fourier transform infrared (FTIR) spectroscopy, which showed a successful extraction of α-cellulose from the samples. Cellulose samples were pretreated at AARAMS, and the graphitization and radiocarbon analysis of these samples were done at both AARAMS and the radiocarbon dating laboratory at Lund University to compare the graphitization and AMS machine performance. No significant offset was found between the two sets of measurements. Based on these tests, the pretreatment of tree rings for high-precision radiocarbon analysis at AARAMS will henceforth use HCI for the delignification.


Sign in / Sign up

Export Citation Format

Share Document