Optical-pulse-interval method for measuring twist deformation of turbine blades in rotation

1993 ◽  
Author(s):  
XinGeng Zhou ◽  
Wei-Bao Zhang ◽  
JianHua Wang
Keyword(s):  
Optical Pulse ◽  
Turbine Blades ◽  
Pulse Interval ◽  
Interval Method

Optical pulse interval and width modulation for analogue fibre communications

1992 ◽  
Vol 139 (6) ◽  
pp. 376 ◽  
Author(s):  
B. Wilson ◽  
Z. Ghassemlooy ◽  
J.C.S. Cheung
Keyword(s):  
Optical Pulse ◽  
Pulse Interval

Ultraviolet Absorption of Refractory Elements by a Dual Laser Plasma Method

1988 ◽  
Vol 102 ◽  
pp. 243-246
Author(s):  
J.T. Costello ◽  
W.G. Lynam ◽  
P.K. Carroll
Keyword(s):  
Absorption Spectra ◽  
Laser Plasma ◽  
Optical Pulse ◽  
Ionic Species ◽  
Neutral Species ◽  
Plasma Method ◽  
Plasma Technique ◽  
Refractory Elements ◽  
Delay Times ◽  
Dual Laser

AbstractThe dual laser-produced plasma technique for the study of ionic absorption spectra has been developed by the use of two Q-switched ruby lasers to enable independent generation of the absorbing and back-lighting plasmas. Optical pulse handling is used in the coupling cicuits to enable reproducible pulse delays from 250 nsec. to 10 msec, to be achieved. At delay times > 700 nsec. spectra of essentially pure neutral species are observed. The technique is valuable, not only for obtaining the neutral spectra of highly refractory and/or corrosive materials but also for studying behaviour of ionic species as a function of time. Typical spectra are shown in Fig. 1.

Chemical partitioning of elements in Ni-base MC-carbide reinforced eutetic superalloys

1983 ◽  
Vol 41 ◽  
pp. 250-251
Author(s):  
E. F. Koch ◽  
E. L. Hall ◽  
S. W. Yang
Keyword(s):  
Alloy Composition ◽  
Volume Fraction ◽  
Lattice Mismatch ◽  
Turbine Blades ◽  
Eutectic Alloys ◽  
Alloy Matrix ◽  
X Ray ◽  
Gas Turbine Blades ◽  
Analytical Electron ◽  
Analytical Electron Microscope

The plane-front solidified eutectic alloys consisting of aligned tantalum monocarbide fibers in a nickel alloy matrix are currently under consideration for future aircraft and gas turbine blades. The MC fibers provide exceptional strength at high temperatures. In these alloys, the Ni matrix is strengthened by the precipitation of the coherent γ' phase (ordered L12 structure, nominally Ni3Al). The mechanical strength of these materials can be sensitively affected by overall alloy composition, and these strength variations can be due to several factors, including changes in solid solution strength of the γ matrix, changes in they γ' size or morphology, changes in the γ-γ' lattice mismatch or interfacial energy, or changes in the MC morphology, volume fraction, thermal stability, and stoichiometry. In order to differentiate between these various mechanisms, it is necessary to determine the partitioning of elemental additions between the γ,γ', and MC phases. This paper describes the results of such a study using energy dispersive X-ray spectroscopy in the analytical electron microscope.

Selection of a leading edge noise prediction method for PNoise

2018 ◽  
pp. 214-223
Author(s):  
AM Faria ◽  
MM Pimenta ◽  
JY Saab Jr. ◽  
S Rodriguez
Keyword(s):  
Wind Turbine ◽  
Turbine Blades ◽  
Prediction Method ◽  
Leading Edge ◽  
Wind Farms ◽  
Broadband Noise ◽  
Turbulence Energy ◽  
Noise Prediction ◽  
Migration Routes ◽  
Turbulent Inflow

Wind energy expansion is worldwide followed by various limitations, i.e. land availability, the NIMBY (not in my backyard) attitude, interference on birds migration routes and so on. This undeniable expansion is pushing wind farms near populated areas throughout the years, where noise regulation is more stringent. That demands solutions for the wind turbine (WT) industry, in order to produce quieter WT units. Focusing in the subject of airfoil noise prediction, it can help the assessment and design of quieter wind turbine blades. Considering the airfoil noise as a composition of many sound sources, and in light of the fact that the main noise production mechanisms are the airfoil self-noise and the turbulent inflow (TI) noise, this work is concentrated on the latter. TI noise is classified as an interaction noise, produced by the turbulent inflow, incident on the airfoil leading edge (LE). Theoretical and semi-empirical methods for the TI noise prediction are already available, based on Amiet’s broadband noise theory. Analysis of many TI noise prediction methods is provided by this work in the literature review, as well as the turbulence energy spectrum modeling. This is then followed by comparison of the most reliable TI noise methodologies, qualitatively and quantitatively, with the error estimation, compared to the Ffowcs Williams-Hawkings solution for computational aeroacoustics. Basis for integration of airfoil inflow noise prediction into a wind turbine noise prediction code is the final goal of this work.

Androgenic and oestrogenic steroid participation in feedback control of luteinizing hormone secretion in male sheep

1983 ◽  
Vol 102 (4) ◽  
pp. 499-504 ◽  
Author(s):  
M. J. D'Occhio ◽  
B. D. Schanbacher ◽  
J. E. Kinder
Keyword(s):  
Luteinizing Hormone ◽  
Pulse Generator ◽  
Hormone Secretion ◽  
Pulse Interval ◽  
Serum Concentrations ◽  
Luteinizing Hormone Secretion ◽  
Lh Release ◽  
Lh Secretion ◽  
Additional Feedback ◽  
Male Sheep

Abstract. The acute castrate ram (wether) was used as an experimental model to investigate the site(s) of feedback on luteinizing hormone (LH) by testosterone, dihydrotestosterone and oestradiol. At the time of castration, wethers were implanted subdermally with Silastic capsules containing either crystalline testosterone (three 30 cm capsules), dihydrotestosterone (five 30 cm capsules) or oestradiol (one 6.5 cm capsule). Blood samples were taken at 10 min intervals for 6 h 2 weeks after implantation to determine serum steroid concentrations and to characterize the patterns of LH secretion. Pituitary LH response to exogenous LRH (5 ng/kg body weight) were also determined at the same time. The steroid implants produced serum concentrations of the respective hormones which were either one-third (testosterone) or two-to-four times (dihydrotestosterone, oestradiol) the levels measured in rams at the time of castration. Non-implanted wethers showed rhythmic pulses of LH (pulse interval 40–60 min) and had elevated LH levels (16.1 ± 1.6 ng/ml; mean ± se) 2 weeks after castration. All three steroids suppressed pulsatile LH release and reduced mean LH levels (to below 3 ng/ml) and pituitary LH responses to LRH. Inhibition of pulsatile LH secretion by all three steroids indicated that testosterone as well as its androgenic and oestrogenic metabolites can inhibit the LRH pulse generator in the hypothalamus. Additional feedback on the pituitary was indicated by the dampened LH responses to exogenous LRH.

Experiments of Wind Turbine Blades with Rocket Triggered Lightning

2009 ◽  
Vol 129 (5) ◽  
pp. 689-695
Author(s):  
Masayuki Minowa ◽  
Shinichi Sumi ◽  
Masayasu Minami ◽  
Kenji Horii
Keyword(s):  
Wind Turbine ◽  
Turbine Blades ◽  
Wind Turbine Blades ◽  
Triggered Lightning
Sign in / Sign up

Export Citation Format

Share Document