Psychophysical method of color reproduction

1992 ◽  
Author(s):  
Shaowei Fu
Keyword(s):  
Psychophysical Method ◽  
Color Reproduction

Quality in Color Reproduction

1946 ◽  
Vol 2 (1) ◽  
pp. 45-49
Author(s):  
J. Arthur Ball
Keyword(s):  
Color Reproduction

scholarly journals Investigation of Color Reproduction on Linen Fabrics when Printing with Mimaki TX400-1800D Inkjet with Pigment TP250 Dyes

Coatings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 354
Author(s):  
Tim Tofan ◽  
Rimantas Stonkus ◽  
Raimondas Jasevičius
Keyword(s):  
Mechanical Properties ◽  
Color Reproduction ◽  
Related Effect ◽  
Color Characteristics ◽  
Fabric Density ◽  
Different Types ◽  
The Difference ◽  
Printing Parameters ◽  
Linen Fabric

The aim of this research is to investigate related effect of dyeability to linen textiles related to different printing parameters. The study investigated the change in color characteristics when printing on linen fabrics with an inkjet MIMAKI Tx400-1800D printer with pigmented TP 250 inks. The dependence of color reproduction on linen fabrics on the number of print head passes, number of ink layers to be coated, linen fabric density, and different types of linen fabric was investigated. All this affects the quality of print and its mechanical properties. The change in color characteristics on different types of linen fabrics was determined experimentally. We determine at which print settings the most accurate color reproduction can be achieved on different linen fabrics. The difference between the highest and the lowest possible number of head passages was investigated. The possibilities of reproducing different linen fabric colors were determined.

Color Reproduction Accuracy Promotion of 3D-Printed Surfaces Based on Microscopic Image Analysis

2019 ◽  
Vol 34 (01) ◽  
pp. 2054004 ◽  
Author(s):  
Xiaochun Wang ◽  
Chen Chen ◽  
Jiangping Yuan ◽  
Guangxue Chen
Keyword(s):  
Surface Roughness ◽  
Image Analysis ◽  
Three Dimensional ◽  
Prediction Method ◽  
Chromatic Aberration ◽  
Optimization Methods ◽  
Experimental Models ◽  
Microscopic Image ◽  
Color Reproduction ◽  
Microscopic Image Analysis

Full-color three-dimensional (3D) printing technology is a powerful process to manufacture intelligent customized colorful objects with improved surface qualities; however, poor surface color optimization methods are the main impeding factors for its commercialization. As such, the paper explored the correlation between microstructure and color reproduction, then an assessment and prediction method of color optimization based on microscopic image analysis was proposed. The experimental models were divided into 24-color plates and 4-color cubes printed by ProJet 860 3D printer, then impregnated according to preset parameters, at last measured by a spectrophotometer and observed using both a digital microscope and a scanning electron microscope. The results revealed that the samples manifested higher saturation and smaller chromatic aberration ([Formula: see text]) after postprocessing. Moreover, the brightness of the same color surface increased with the increasing soaked surface roughness. Further, reduction in surface roughness, impregnation into surface pores, and enhancement of coating transparency effectively improved the accuracy of color reproduction, which could be verified by the measured values. Finally, the chromatic aberration caused by positioning errors on different faces of the samples was optimized, and the value of [Formula: see text] for a black cube was reduced from 8.12 to 0.82, which is undetectable to human eyes.

A Response-Time Approach for Estimating Sensitivity to Auditory Tempo Changes

2005 ◽  
Vol 22 (3) ◽  
pp. 389-399 ◽  
Author(s):  
Marc Pouliot ◽  
Simon Grondin
Keyword(s):  
Response Time ◽  
Auditory System ◽  
Relative Sensitivity ◽  
Psychophysical Method ◽  
Dynamic Stimuli ◽  
Tempo Change ◽  
Sensitive Tool ◽  
Acceleration And Deceleration ◽  
Musical Condition ◽  
Method Of Constant Stimuli

One of the features of the auditory system is its ability to efficiently process events that occur in rapid succession. The aim of the present study is to propose a new way of investigating sensitivity to auditory tempo changes. More specifically, it proposes to compare the relative sensitivity (bias) to acceleration and deceleration in both musical and monotonal conditions. Bias was measured with (1) a conventional psychophysical method known as the method of constant stimuli (MCS) and (2) a so-called method of dynamic stimuli (MDS). The latter method consists in responding with a finger press as soon as a near-continual tempo change is detected. With the MCS, there was no preference, as estimated by the point of subjective equality, between acceleration and deceleration in the monotonal condition, but there was a preference in the musical condition that indicated more facility for estimating decelerations than accelerations. The results obtained with the MDS are consistent with the MCS results, given that the response time was faster for decelerations than accelerations in the musical condition but not in the monotonal condition. We conclude that the MDS is a sensitive tool for investigating slight tempo variations.

Color reproduction on inkjet printers and paper colorimetric properties

2003 ◽  
Author(s):  
Jesus Fernandez-Reche ◽  
Joan Uroz ◽  
Jose A. Diaz ◽  
Antonio Garcia-Beltran
Keyword(s):  
Color Reproduction ◽  
Inkjet Printers
Sign in / Sign up

Export Citation Format

Share Document