Nanometer-scale capillary-driven flow and molecular weight govern polymer nanostructure deposition from a heated tip

2021 ◽  
Vol 39 (3) ◽  
pp. 032601
Author(s):  
Sihan Chen ◽  
William P. King
Keyword(s):  
Molecular Weight ◽  
Nanometer Scale ◽  
Polymer Nanostructure

Nanolithography Using In-Situ Electron Beam Vaporization of Very Low Molecular Weight Resists

1981 ◽  
Vol 39 ◽  
pp. 372-373
Author(s):  
M. Isaacson ◽  
A. Muray
Keyword(s):  
Molecular Weight ◽  
Electron Beam ◽  
Nanometer Scale ◽  
Low Molecular Weight ◽  
Electron Sources ◽  
Incident Electron Beam ◽  
One Step ◽  
Beam Currents ◽  
Initial Pattern

We have begun a program of investigation of the suitability of very low molecular weiqht materials as electron beam resists for the development of structures on the nanometer scale. With the advent of reliable field emission source technology, electron sources can be produced that have brightnesses several orders of magnitude greater than existing thermionic sources. Thus, nanoamp beam currents are attainble in subnanometer diameter electron probes. This means that as little as a 10 μsec exposure is needed to deposit a dose of 1 C/cm2 in a sample. It therefore becomes reasonable to explore the ultimate limits of 1ithography, since different materials can be studied that are not necessarily as radiation sensitive as the standard high molecular weight resists (e.g., PMMA).Our explorations have centered on materials of molecular weight around 100 which could be readily vaporized under the action of the incident electron beam directly within an electron microscope ( 10-3 to 103 C/cm2). The initial pattern writing and development can then be done in one step.

scholarly journals Automated solvent vapor annealing with nanometer scale control of film swelling for block copolymer thin films

Soft Matter ◽  
2019 ◽  
Vol 15 (39) ◽  
pp. 7909-7917 ◽  
Author(s):  
Hanna Hulkkonen ◽  
Turkka Salminen ◽  
Tapio Niemi
Keyword(s):  
Molecular Weight ◽  
Self Assembly ◽  
Nanometer Scale ◽  
Solvent Annealing ◽  
Solvent Vapor ◽  
Vapor Annealing ◽  
Solvent Vapor Annealing ◽  
Computer Controlled ◽  
Scale Control ◽  
Annealing Method

A computer-controlled solvent annealing method for BCP self-assembly was developed in this work. With optimized film swelling, the annealing time is drastically reduced and self-assembly of high-molecular weight BCPs is achieved in minutes.

Evaluation of the dark field method for large association of spread DNA

1978 ◽  
Vol 36 (2) ◽  
pp. 190-191
Author(s):  
Douglas C. Barker
Keyword(s):  
Electron Microscopy ◽  
Molecular Weight ◽  
Mitochondrial Dna ◽  
Extraction Method ◽  
Field Method ◽  
Dark Field ◽  
Kinetoplast Dna ◽  
Field Electron ◽  
Field Electron Microscopy ◽  
Dark Field Electron

A number of satisfactory methods are available for the electron microscopy of nicleic acids. These methods concentrated on fragments of nuclear, viral and mitochondrial DNA less than 50 megadaltons, on denaturation and heteroduplex mapping (Davies et al 1971) or on the interaction between proteins and DNA (Brack and Delain 1975). Less attention has been paid to the experimental criteria necessary for spreading and visualisation by dark field electron microscopy of large intact issociations of DNA. This communication will report on those criteria in relation to the ultrastructure of the (approx. 1 x 10-14g) DNA component of the kinetoplast from Trypanosomes. An extraction method has been developed to eliminate native endonucleases and nuclear contamination and to isolate the kinetoplast DNA (KDNA) as a compact network of high molecular weight. In collaboration with Dr. Ch. Brack (Basel [nstitute of Immunology), we studied the conditions necessary to prepare this KDNA Tor dark field electron microscopy using the microdrop spreading technique.

Introduction

1978 ◽  
Vol 36 (3) ◽  
pp. 543-544
Author(s):  
W. Bernard
Keyword(s):  
Molecular Weight ◽  
Electron Microscope ◽  
Nucleic Acid ◽  
Gene Mapping ◽  
Molecular Genetics ◽  
Cell Biology ◽  
Gene Activity ◽  
Close Connection ◽  
Basic Information ◽  
Simple Systems

In comparison to many other fields of ultrastructural research in Cell Biology, the successful exploration of genes and gene activity with the electron microscope in higher organisms is a late conquest. Nucleic acid molecules of Prokaryotes could be successfully visualized already since the early sixties, thanks to the Kleinschmidt spreading technique - and much basic information was obtained concerning the shape, length, molecular weight of viral, mitochondrial and chloroplast nucleic acid. Later, additonal methods revealed denaturation profiles, distinction between single and double strandedness and the use of heteroduplexes-led to gene mapping of relatively simple systems carried out in close connection with other methods of molecular genetics.

The External Shape of Human γ GI Immunoglobulin from Crystal Sections

1971 ◽  
Vol 29 ◽  
pp. 428-429
Author(s):  
L. W. Labaw
Keyword(s):  
Molecular Weight ◽  
Sodium Phosphate ◽  
Osmium Tetroxide ◽  
Unit Cell ◽  
Monoclinic Space Group ◽  
X Ray ◽  
Large Molecular Weight ◽  
Cell Dimensions ◽  
Unit Cell Dimensions ◽  
Crystallographic Axes

Crystals of a human γGl immunoglobulin have the external morphology of diamond shaped prisms. X-ray studies have shown them to be monoclinic, space group C2, with 2 molecules per unit cell. The unit cell dimensions are a = 194.1, b = 91.7, c = 51.6Å, 8 = 102°. The relatively large molecular weight of 151,000 and these unit cell dimensions made this a promising crystal to study in the EM.Crystals similar to those used in the x-ray studies were fixed at 5°C for three weeks in a solution of mother liquor containing 5 x 10-5M sodium phosphate, pH 7.0, and 0.03% glutaraldehyde. They were postfixed with 1% osmium tetroxide for 15 min. and embedded in Maraglas the usual way. Sections were cut perpendicular to the three crystallographic axes. Such a section cut with its plane perpendicular to the z direction is shown in Fig. 1.This projection of the crystal in the z direction shows periodicities in at least four different directions but these are only seen clearly by sighting obliquely along the micrograph.

Conformation of eukaryotic ribosomal RNAs

1983 ◽  
Vol 41 ◽  
pp. 592-593
Author(s):  
M. Boublik ◽  
G. Thornton ◽  
G. Oostergetel ◽  
J.F. Hainfeld ◽  
J.S. Wall
Keyword(s):  
Molecular Weight ◽  
Mass Measurement ◽  
Carbon Film ◽  
Structural Complexity ◽  
Scanning Transmission Electron Microscope ◽  
Electron Microscopic ◽  
Pure Nitrogen ◽  
Freeze Dried ◽  
Scanning Transmission ◽  
Partially Unfolded

Understanding the structural complexity of ribosomes and their role in protein synthesis requires knowledge of the conformation of their components - rRNAs and proteins. Application of dedicated scanning transmission electron microscope (STEM), electrical discharge of the support carbon film in an atmosphere of pure nitrogen, and determination of the molecular weight of individual rRNAs enabled us to obtain high resolution electron microscopic images of unstained freeze-dried rRNA molecules from BHK cells in a form suitable for evaluation of their 3-D structure. Preliminary values for the molecular weight of 28S RNA from the large and 18S RNA from the small ribosomal subunits as obtained by mass measurement were 1.84 x 106 and 0.97 x 106, respectively. Conformation of rRNAs consists, in general, of alternating segments of intramolecular hairpin stems and single stranded loops in a proportion which depends on their ionic environment, the Mg++ concentration in particular. Molecules of 28S RNA (Fig. 1) and 18S RNA (not shown) obtained by freeze-drying from a solution of 60 mM NH+4 acetate and 2 mM Mg++ acetate, pH 7, appear as partially unfolded coils with compact cores suggesting a high degree of ordered secondary structure.

The Structure of Radiation Cross-Linked Poly (ethylene oxide) Gels

1971 ◽  
Vol 29 ◽  
pp. 76-77
Author(s):  
C. E. Cluthe ◽  
G. G. Cocks
Keyword(s):  
Molecular Weight ◽  
Ethylene Oxide ◽  
Parallel Plate ◽  
Average Molecular Weight ◽  
Radical Reaction ◽  
Free Radical Reaction ◽  
Nitrogen Gas ◽  
Poly Ethylene Oxide ◽  
Poly Ethylene ◽  
Initial Viscosity

Aqueous solutions of a 1 weight-per cent poly (ethylene oxide) (PEO) were degassed under vacuum, transferred to a parallel plate viscometer under a nitrogen gas blanket, and exposed to Co60 gamma radiation. The Co60 source was rated at 4000 curies, and the dose ratewas 3.8x105 rads/hr. The poly (ethylene oxide) employed in the irradiations had an initial viscosity average molecular weight of 2.1 x 106.The solutions were gelled by a free radical reaction with dosages ranging from 5x104 rads to 4.8x106 rads.

The Collagenic Molecular Structural Unit of Solid State Complexes

1971 ◽  
Vol 29 ◽  
pp. 478-479
Author(s):  
Kenneth M. Richter ◽  
John A. Schilling
Keyword(s):  
Molecular Weight ◽  
Solid State ◽  
Structural Unit ◽  
X Ray Diffraction ◽  
X Ray ◽  
Naoh Treatment

The structural unit of solid state collagen complexes has been reported by Porter and Vanamee via EM and by Cowan, North and Randall via x-ray diffraction to be an ellipsoidal unit of 210-270 A. length by 50-100 A. diameter. It subsequently was independently demonstrated by us in dog tendon, dermis, and induced complexes. Its detailed morphologic, dimensional and molecular weight (MW) aspects have now been determined. It is pear-shaped in long profile with m diameters of 57 and 108 A. and m length of 263 A. (Fig. 1, tendon, KMnO4 fixation, Na-tungstate; Fig. 2a, schematic of unit in long, C, and x-sectional profiles of its thin, xB, and bulbous, xA portions; Fig. 2b, tendon essentially unmodified by ether and 0.4 N NaOH treatment, Na-tungstate). The unit consists of a uniquely coild cable, c, of ṁ 22.9 A. diameter and length of 2580-3316 A. The cable consists of three 2nd-strands, s, each of m 10.6 A.

Examination of Rabbit Fc Crystals

1968 ◽  
Vol 26 ◽  
pp. 140-141
Author(s):  
J. P. Robinson ◽  
P. G. Lenhert
Keyword(s):  
Molecular Weight ◽  
Flat Plate ◽  
Phosphate Buffer ◽  
Asymmetric Unit ◽  
X Ray Diffraction ◽  
X Ray ◽  
Neutral Ph ◽  
Small Crystals ◽  
Carbon Coated ◽  
Diffraction Patterns

Crystallographic studies of rabbit Fc using X-ray diffraction patterns were recently reported. The unit cell constants were reported to be a = 69. 2 A°, b = 73. 1 A°, c = 60. 6 A°, B = 104° 30', space group P21, monoclinic, volume of asymmetric unit V = 148, 000 A°3. The molecular weight of the fragment was determined to be 55, 000 ± 2000 which is in agreement with earlier determinations by other methods.Fc crystals were formed in water or dilute phosphate buffer at neutral pH. The resulting crystal was a flat plate as previously described. Preparations of small crystals were negatively stained by mixing the suspension with equal volumes of 2% silicotungstate at neutral pH. A drop of the mixture was placed on a carbon coated grid and allowed to stand for a few minutes. The excess liquid was removed and the grid was immediately put in the microscope.

Sign in / Sign up

Export Citation Format

Share Document