Schottky barrier height of TiN∕p-type Si(100) evaluated by forward current–voltage and capacitance

2005 ◽  
Vol 23 (1) ◽  
pp. 178 ◽  
Author(s):  
Joshua Pelleg ◽  
A. Douhin
Keyword(s):  
Schottky Barrier ◽  
Barrier Height ◽  
Schottky Barrier Height ◽  
Forward Current ◽  
Current Voltage ◽  
P Type

THE EFFECT OF NANO AND MICRO POROSITY ON THE SCHOTTKY BARRIER HEIGHT AND IDEALITY FACTOR IN THE I–V CHARACTERISTICS OF PtSi/p-Si IR DETECTOR

2009 ◽  
Vol 23 (05) ◽  
pp. 765-771
Author(s):  
H. ESHGHI ◽  
M. MOHAMMADI
Keyword(s):  
Schottky Barrier ◽  
Barrier Height ◽  
Ideality Factor ◽  
Schottky Barrier Height ◽  
Thermionic Emission ◽  
Ir Detector ◽  
Current Voltage ◽  
Two Samples ◽  
P Type ◽  
Silicon Interface

In this paper, the effect of porosity on reverse bias current–voltage characteristics of PtSi/por - Si (p-type) IR detector as a function of temperature is investigated. Our experimental data for two samples with different porosities (50% and 10%) at 300 K and 77 K are reported by Raissi et al.1 These data indicates a breakdown-like behavior. Our analytical model is based on hole thermionic emission with large ideality factor (n ≈ 200). Our calculations show that at each temperature, the Schottky barrier height, as well as the ideality factor, in sample with 10% porosity is bigger than that of 50%. These variations could be due to band gap variations of Si size effect using quantum dot model, and the presence of the relatively high (~1015 cm-2 eV-1) density of states at the silicide/por-silicon interface, respectively.

Schottky Barrier Height andS-Parameter of Ti, Cu, Pd, and Pt Contacts on p-Type GaN

2012 ◽  
Vol 51 (9S2) ◽  
pp. 09MK01 ◽  
Author(s):  
Youngjun Park ◽  
Kwang-Soon Ahn ◽  
Hyunsoo Kim
Keyword(s):  
Schottky Barrier ◽  
Barrier Height ◽  
Schottky Barrier Height ◽  
P Type

High Voltage Schottky Barrier Diodes on P-Type SiC using Metal-Overlap on a Thick Oxide Layer as Edge Termination

1999 ◽  
Vol 572 ◽  
Author(s):  
Q. Zhang ◽  
V. Madangarli ◽  
S. Soloviev ◽  
T. S. Sudarshan
Keyword(s):  
Schottky Barrier ◽  
Oxide Layer ◽  
Breakdown Voltage ◽  
Schottky Diodes ◽  
Schottky Barrier Diodes ◽  
Edge Termination ◽  
Forward Current ◽  
Current Voltage ◽  
Thick Oxide Layer ◽  
P Type

ABSTRACTP-type 6H SiC Schottky barrier diodes with good rectifying characteristics upto breakdown voltage as high as 1000V have been successfully fabricated using metal-overlap over a thick oxide layer (∼ 6000 Å) as edge termination and Al as the barrier metal. The influence of the oxide layer edge termination in improving the reverse breakdown voltage as well as the forward current – voltage characteristics is presented. The terminated Schottky diodes indicate a factor of two higher breakdown voltage and 2–3 times larger forward current densities than those without edge termination. The specific series resistance of the unterminated diodes was ∼228 mΩ-cm2, while that of the terminated diodes was ∼84 mΩ-cm2.

scholarly journals Tunable Electronic Properties of Graphene/g-AlN Heterostructure: The Effect of Vacancy and Strain Engineering

Nanomaterials ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1674 ◽  
Author(s):  
Xuefei Liu ◽  
Zhaofu Zhang ◽  
Zijiang Luo ◽  
Bing Lv ◽  
Zhao Ding
Keyword(s):  
Electronic Properties ◽  
Schottky Barrier ◽  
Barrier Height ◽  
Tensile Strain ◽  
Schottky Barrier Height ◽  
Strain Engineering ◽  
Nitrogen Vacancy ◽  
First Principles Calculation ◽  
Type Contact ◽  
P Type

The structural and electronic properties of graphene/graphene-like Aluminum Nitrides monolayer (Gr/g-AlN) heterojunction with and without vacancies are systematically investigated by first-principles calculation. The results prove that Gr/g-AlN with nitrogen-vacancy (Gr/g-AlN-VN) is energy favorable with the smallest sublayer distance and binding energy. Gr/g-AlN-VN is nonmagnetic, like that in the pristine Gr/g-AlN structure, but it is different from the situation of g-AlN-VN, where a magnetic moment of 1 μB is observed. The metallic graphene acts as an electron acceptor in the Gr/g-AlN-VN and donor in Gr/g-AlN and Gr/g-AlN-VAl contacts. Schottky barrier height Φ B , n by traditional (hybrid) functional of Gr/g-AlN, Gr/g-AlN-VAl, and Gr/g-AlN-VN are calculated as 2.35 (3.69), 2.77 (3.23), and 1.10 (0.98) eV, respectively, showing that vacancies can effectively modulate the Schottky barrier height. Additionally, the biaxial strain engineering is conducted to modulate the heterojunction contact properties. The pristine Gr/g-AlN, which is a p-type Schottky contact under strain-free condition, would transform to an n-type contact when 10% compressive strain is applied. Ohmic contact is formed under a larger tensile strain. Furthermore, 7.5% tensile strain would tune the Gr/g-AlN-VN from n-type to p-type contact. These plentiful tunable natures would provide valuable guidance in fabricating nanoelectronics devices based on Gr/g-AlN heterojunctions.

Sign in / Sign up

Export Citation Format

Share Document