Spectrophotometer for Continuous Measurement in Vacuum Systems of Polyphenyl Diffusion Pump Fluid Film Thickness

1967 ◽  
Vol 4 (5) ◽  
pp. 276-278 ◽  
Author(s):  
Rodney W. Supple ◽  
Hermilo R. Gloria
Keyword(s):  
Film Thickness ◽  
Continuous Measurement ◽  
Fluid Film ◽  
Diffusion Pump ◽  
Fluid Film Thickness ◽  
Vacuum Systems

Performance Analysis of a Nonrecessed Hybrid Conical Journal Bearing Compensated With Capillary Restrictors

2015 ◽  
Vol 138 (1) ◽  
Author(s):  
Prashant G. Khakse ◽  
Vikas M. Phalle ◽  
S. S. Mantha
Keyword(s):  
Performance Analysis ◽  
Film Thickness ◽  
Journal Bearing ◽  
Fluid Film ◽  
Load Parameter ◽  
Radial Load ◽  
Wide Range ◽  
Bearing Stiffness ◽  
Fluid Film Thickness ◽  
Film Stiffness

The present paper deals with the performance analysis of a nonrecessed hole-entry hydrostatic/hybrid conical journal bearing with capillary restrictors. Finite element method has been used for solving the modified Reynolds equation governing the flow of lubricant in the clearance space of journal and bearing. The hole-entry hybrid conical journal bearing performance characteristics have been depicted for a wide range of radial load parameter (W¯r  = 0.25–1.5) with uniform distribution of holes at an angle of 30 deg in the circumferential direction. The numerically simulated results have been presented in terms of maximum fluid film pressure, minimum fluid film thickness, lubricant flow rate, direct fluid film stiffness coefficients, direct fluid film damping coefficients, and stability threshold speed. However, the proposed investigation of nonrecess hole-entry hybrid conical journal bearing shows important performance for bearing stiffness and minimum fluid film thickness at variable radial load and at given operating speed.

Rheological Behaviors of Pressure-Driven Radial Flow

2007 ◽  
Author(s):  
Z. Xie ◽  
Q. Zou ◽  
D. Yao
Keyword(s):  
Film Thickness ◽  
Radial Flow ◽  
Practical Interest ◽  
Fluid Film ◽  
Fluid Viscosity ◽  
Surface Shear Stress ◽  
Surface Shear ◽  
Shear Dependent Viscosity ◽  
Fluid Film Thickness ◽  
Pressure Driven

The characteristics of fluid flows confined within microscale space are of theoretical and practical interest [1]. Such flow includes the thin lubrication films, the liquid flow between biological cells, and the flow of polymer melts in a micro-injection molding machines, etc. A pressure-driven radial flow microrheometry (PDRFM) is used to characterize high-shear microscale fluids. The shear-dependent viscosity of the pressure-driven radial flow is modeled to investigate the possible size effect on the fluid viscosity. In the modeling, the surface shear rate and surface shear stress at the edge of the radial flow are expressed in terms of three measurable parameters, i.e. the flow rate, the loading force, and the fluid film thickness. By decreasing the fluid film thickness to microscale level, this model can be used to study the microscale effect of any homogeneous fluids. The analysis has been verified by using CFD simulations as digital testing platforms. Furthermore, the preliminary experimental results of Newtonian and non-Newtonian flows also proved the rheological modeling.

Surface Deformations Enable High Pressure Operation of Axial Piston Pumps

2011 ◽  
Author(s):  
Matteo Pelosi ◽  
Monika Ivantysynova
Keyword(s):  
Film Thickness ◽  
Material Properties ◽  
Fluid Film ◽  
Cylinder Block ◽  
Steel Cylinder ◽  
Elastic Deformations ◽  
Piston Cylinder ◽  
Fluid Film Thickness ◽  
The Impact ◽  
Axial Piston

In this paper, a fully coupled fluid-structure interaction and thermal numerical model developed by the authors is used to demonstrate the impact of surface elastic deformations on the piston/cylinder fluid film thickness and on the overall axial piston pump rotating kit performance. The piston/cylinder interface is one of the most critical lubricating interfaces of axial piston machines. This interface fulfills simultaneously a bearing and sealing function under oscillating load conditions in a purely hydrodynamic regime. It represents one of the main sources of energy dissipation and it is therefore a key design element, determining axial piston machine efficiency. In the past years, the research group of the authors studied the impact of advanced micro surface design and fluid film thickness micro alteration in the piston/cylinder interface through extensive simulations and experiments. However, the numerical models used did not include the influence of surface elastic deformations, heat transfer and therefore material properties on the piston/cylinder interface behavior. Hence, the aim of this paper is to show the alterations on fluid film thickness and on the consequent coupled physical parameters due to the solid boundaries pressure and thermal surface elastic deformations. A simulation study considering two different material properties for the cylinder bores is performed, where a steel cylinder block and a steel cylinder block with brass bushings are separately studied. Piston/cylinder gap pressure field and coupled gap surface elastic deformations due to pressure and thermal loading are shown for the different materials. The impact of the different materials behavior on lubricating interface performance is discussed.

Theoretical Studies of a Continuously Adjustable Hydrodynamic Fluid Film Bearing

2001 ◽  
Vol 124 (1) ◽  
pp. 203-211 ◽  
Author(s):  
J. K. Martin ◽  
D. W. Parkins
Keyword(s):  
Film Thickness ◽  
Reynolds Equation ◽  
Solution Procedure ◽  
Fluid Film ◽  
Theoretical Studies ◽  
Analysis Model ◽  
Operating Characteristics ◽  
Hydrodynamic Bearing ◽  
Wide Range ◽  
Fluid Film Thickness

Principles of a continuously adjustable hydrodynamic bearing are described together with an analysis model for studying its theoretical performance. The model included an expanded form of the governing Reynolds equation which took account of non-uniform variations in the fluid film thickness. A solution procedure was devised whereby for a given set of adjustment conditions, simultaneously converged fields of fluid film thickness, temperature, viscosity and pressure would result, together with oil film forces. A wide range of operating characteristics were studied with results predicting advantages and benefits over conventional hydrodynamic bearings.

scholarly journals Research on the Dynamic Characteristics of Mechanical Seal under Different Extrusion Fault Degrees

Processes ◽  
2020 ◽  
Vol 8 (9) ◽  
pp. 1057
Author(s):  
Yin Luo ◽  
Yakun Fan ◽  
Yuejiang Han ◽  
Weqi Zhang ◽  
Emmanuel Acheaw
Keyword(s):  
Film Thickness ◽  
Dynamic Characteristics ◽  
Fluid Film ◽  
Mechanical Seal ◽  
Mechanical Seals ◽  
Rotating Speed ◽  
Analysis Process ◽  
Fluid Film Thickness ◽  
Object Of Study ◽  
Fault Mechanism

In order to explore the dynamic characteristics of the mechanical seal under different fault degrees, this paper selected the upstream pumping mechanical seal as the object of study. The research established the rotating ring-fluid film-stationary ring 3D model, which was built to analyze the fault mechanism. To study extrusion fault mechanism and characteristics, different dynamic parameters were used in the analysis process. Theoretical analysis, numerical simulation, and comparison were conducted to study the relationship between the fault degree and dynamic characteristics. It is the first time to research the dynamic characteristics of mechanical seals in the specific extrusion fault. This paper proved feasibility and effectiveness of the new analysis method. The fluid film thickness and dynamic characteristics could reflect the degree of the extrusion fault. Results show that the fluid film pressure fluctuation tends to be more intensive under the serious extrusion fault condition. The extrusion fault is more likely to occur when the fluid film thickness is too large or too small. Results illustrate the opening force is affected with the fluid film lubrication status and seal extrusion fault degrees. The fluid film stiffness would not always increase with the rotating speed growth. The seal fault would occur with the increasing of rotating speeds, and the leakage growth fluctuations could reflect the fault degree.

The Effect of Wafer Shape on Slurry Film Thickness and Friction Coefficients in Chemical Mechanical Planarization

2000 ◽  
Vol 613 ◽  
Author(s):  
Joseph Lu ◽  
Jonathan Coppeta ◽  
Chris Rogers ◽  
Vincent P. Manno ◽  
Livia Racz ◽  
...  
Keyword(s):  
Film Thickness ◽  
Drag Force ◽  
Chemical Mechanical Planarization ◽  
Fluid Film ◽  
Ex Situ ◽  
Local Pressure ◽  
Dual Emission ◽  
Polishing Pad ◽  
Fluid Film Thickness

ABSTRACTThe fluid film thickness and drag during chemical-mechanical polishing are largely dependent on the shape of the wafer polished. In this study we use dual emission laser induced fluorescence to measure the film thickness and a strain gage, mounted on the polishing table, to measure the friction force between the wafer and the pad. All measurements are taken during real polishing processes. The trends indicate that with a convex wafer in contact with the polishing pad, the slurry layer increases with increasing platen speed and decreases with increasing downforce. The drag force decreases with increasing platen speed and increases with increasing downforce. These similarities are observed for both in-situ and ex-situ conditioning. However, these trends are significantly different for the case of a concave wafer in contact with the polishing pad. During ex-situ conditioning the trends are similar as with a convex wafer. However, in-situ conditioning decreases the slurry film layer with increasing platen speed, and increases it with increasing downforce in the case of the concave wafer. The drag force increases with increasing platen speed as well as increasing downforce. Since we are continually polishing, the wafer shape does change over the course of each experiment causing a larger error in repeatability than the measurement error itself. Different wafers are used throughout the experiment and the results are consistent with the variance of the wafer shape. Local pressure measurements on the rotating wafer help explain the variances in fluid film thickness and friction during polishing.

Sign in / Sign up

Export Citation Format

Share Document