Summary of the Delft University Wind Turbine Dedicated Airfoils

2003 ◽  
Author(s):  
W. A. Timmer ◽  
R. P. J. O. M. van Rooij
Keyword(s):  
Wind Turbine ◽  
Lift Coefficient ◽  
Wind Tunnel Test ◽  
Leading Edge ◽  
Vortex Generators ◽  
Test Results ◽  
Relative Thickness ◽  
University Of Technology ◽  
Measured Effect ◽  
Edge Separation

This paper gives an overview of the design and wind tunnel test results of the wind turbine dedicated airfoils developed by Delft University of Technology (DUT). The DU-airfoils range in maximum relative thickness from 15% to 40% chord. The first designs were made with XFOIL. Since 1995 RFOIL was used, a modified version of XFOIL, featuring an improved prediction around the maximum lift coefficient and capabilities of predicting the effect of rotation on airfoil characteristics. The measured effect of Gurney flaps, trailing edge wedges, vortex generators and trip wires on the airfoil characteristics of various DU-airfoils is presented. Furthermore, a relation between the thickness of the airfoil leading edge and the angle-of-attack for leading edge separation is given.

Summary of the Delft University Wind Turbine Dedicated Airfoils

2003 ◽  
Vol 125 (4) ◽  
pp. 488-496 ◽  
Author(s):  
W. A. Timmer ◽  
R. P. J. O. M. van Rooij
Keyword(s):  
Wind Turbine ◽  
Lift Coefficient ◽  
Wind Tunnel Test ◽  
Leading Edge ◽  
Vortex Generators ◽  
Test Results ◽  
Relative Thickness ◽  
University Of Technology ◽  
Measured Effect ◽  
Edge Separation

This paper gives an overview of the design and wind tunnel test results of the wind turbine dedicated airfoils developed by Delft University of Technology (DUT). The DU-airfoils range in maximum relative thickness from 15% to 40% chord. The first designs were made with the XFOIL code. The computer program RFOIL, which is a modified version of XFOIL featuring an improved prediction around the maximum lift coefficient and the capability of predicting the effect of rotation on airfoil characteristics, has been used to design the airfoils since 1995. The measured effect of Gurney flaps, trailing edge wedges, vortex generators (vg) and trip wires on the airfoil characteristics of various DU-airfoils is presented. Furthermore, a relation between the thickness of the airfoil leading edge and the angle-of-attack for leading edge separation is given.

scholarly journals Wind Tunnel Test of the S814 Thick Root Airfoil

1996 ◽  
Vol 118 (4) ◽  
pp. 217-221 ◽  
Author(s):  
D. M. Somers ◽  
J. L. Tangler
Keyword(s):  
Wind Tunnel ◽  
Lift Coefficient ◽  
Wind Tunnel Test ◽  
Leading Edge ◽  
Reynolds Numbers ◽  
Rotor Blades ◽  
Roughness Effects ◽  
Root Region ◽  
University Of Technology ◽  
Thick Airfoil

The objective of this wind-tunnel test was to verify the predictions of the Eppler Airfoil Design and Analysis Code for a very thick airfoil having a high maximum lift coefficient designed to be largely insensitive to leading-edge roughness effects. The 24 percent thick S814 airfoil was designed with these characteristics to accommodate aerodynamic and structural considerations for the root region of a wind-turbine blade. In addition, the airfoil’s maximum lift-to-drag ratio was designed to occur at a high lift coefficient. To accomplish the objective, a two-dimensional wind tunnel test of the S814 thick root airfoil was conducted in January 1994 in the low-turbulence wind tunnel of the Delft University of Technology Low Speed Laboratory, The Netherlands. Data were obtained with transition free and transition fixed for Reynolds numbers of 0.7, 1.0, 1.5, 2.0, and 3.0 × 106. For the design Reynolds number of 1.5 × 106, the maximum lift coefficient with transition free is 1.32, which satisfies the design specification. However, this value is significantly lower than the predicted maximum lift coefficient of almost 1.6. With transition fixed at the leading edge, the maximum lift coefficient is 1.22. The small difference in maximum lift coefficient between the transition-free and transition-fixed conditions demonstrates the airfoil’s minimal sensitivity to roughness effects. The S814 root airfoil was designed to complement existing NREL low maximum-lift-coefficient tip-region airfoils for rotor blades 10 to 15 meters in length.

scholarly journals Design, Manufacturing, and Testing of a New Concept for a Morphing Leading Edge using a Subsonic Blow Down Wind Tunnel

Biomimetics ◽  
2019 ◽  
Vol 4 (4) ◽  
pp. 76
Author(s):  
David Communier ◽  
Franck Le Besnerais ◽  
Ruxandra Mihaela Botez ◽  
Tony Wong
Keyword(s):  
Wind Tunnel ◽  
Lift Coefficient ◽  
Wind Tunnel Test ◽  
Leading Edge ◽  
Test Results ◽  
Deformation Method ◽  
Blow Down ◽  
Aerial Vehicle ◽  
Compliance Mechanism ◽  
Stall Angle

This paper presents the design and wind tunnel test results of a wing including a morphing leading edge for a medium unmanned aerial vehicle with a maximum wingspan of 5 m. The design of the morphing leading edge system is part of research on the design of a morphing camber system. The concept presented here has the advantage of being simple to manufacture (wooden construction) and light for the structure of the wing (compliance mechanism). The morphing leading edge prototype demonstrates the possibility of modifying the stall angle of the wing. In addition, the modification of the stall angle is performed without affecting the slope of the lift coefficient. This prototype is designed to validate the functionality of the deformation method applied to the leading edge of the wing. The mechanism can be further optimized in terms of shape and material to obtain a greater deformation of the leading edge, and, thus, to have a higher impact on the increase of the stall angle than the first prototype of the morphing leading edge presented in this paper.

Experimental investigations of flow over NACA airfoils 0021 and 4412 of wind turbine blades with and without Tubercles

2021 ◽  
pp. 0309524X2110071
Author(s):  
Usman Butt ◽  
Shafqat Hussain ◽  
Stephan Schacht ◽  
Uwe Ritschel
Keyword(s):  
Wind Tunnel ◽  
Drag Coefficient ◽  
Wind Turbine ◽  
Critical Region ◽  
Lift Coefficient ◽  
Turbine Blades ◽  
Leading Edge ◽  
Reynolds Numbers ◽  
Experimental Investigations ◽  
Wind Turbine Blades

Experimental investigations of wind turbine blades having NACA airfoils 0021 and 4412 with and without tubercles on the leading edge have been performed in a wind tunnel. It was found that the lift coefficient of the airfoil 0021 with tubercles was higher at Re = 1.2×105 and 1.69×105 in post critical region (at higher angle of attach) than airfoils without tubercles but this difference relatively diminished at higher Reynolds numbers and beyond indicating that there is no effect on the lift coefficients of airfoils with tubercles at higher Reynolds numbers whereas drag coefficient remains unchanged. It is noted that at Re = 1.69×105, the lift coefficient of airfoil without tubercles drops from 0.96 to 0.42 as the angle of attack increases from 15° to 20° which is about 56% and the corresponding values of lift coefficient for airfoil with tubercles are 0.86 and 0.7 at respective angles with18% drop.

Three-Dimensional and Rotational Aerodynamics on the NREL Phase VI Wind Turbine Blade

2008 ◽  
Vol 130 (3) ◽  
Author(s):  
Alvaro Gonzalez ◽  
Xabier Munduate
Keyword(s):  
Wind Turbine ◽  
Turbine Blade ◽  
Three Dimensional ◽  
Separated Flow ◽  
Leading Edge ◽  
Wind Turbine Blade ◽  
Trailing Edge ◽  
Rotating Blade ◽  
Nrel Phase Vi ◽  
Edge Separation

This work undertakes an aerodynamic analysis over the parked and the rotating NREL Phase VI wind turbine blade. The experimental sequences from NASA Ames wind tunnel selected for this study respond to the parked blade and the rotating configuration, both for the upwind, two-bladed wind turbine operating at nonyawed conditions. The objective is to bring some light into the nature of the flow field and especially the type of stall behavior observed when 2D aerofoil steady measurements are compared to the parked blade and the latter to the rotating one. From averaged pressure coefficients together with their standard deviation values, trailing and leading edge separated flow regions have been found, with the limitations of the repeatability of the flow encountered on the blade. Results for the parked blade show the progressive delay from tip to root of the trailing edge separation process, with respect to the 2D profile, and also reveal a local region of leading edge separated flow or bubble at the inner, 30% and 47% of the blade. For the rotating blade, results at inboard 30% and 47% stations show a dramatic suppression of the trailing edge separation, and the development of a leading edge separation structure connected with the extra lift.

Effects of leading-edge bevel angle on the aerodynamic forces of a non-slender 50° delta wing

2005 ◽  
Vol 109 (1098) ◽  
pp. 403-407 ◽  
Author(s):  
J. J. Wang ◽  
S. F. Lu
Keyword(s):  
Delta Wing ◽  
Lift Coefficient ◽  
Leading Edge ◽  
Relative Thickness ◽  
Aerodynamic Performances ◽  
Stall Angle ◽  
Drag Ratio ◽  
Low Speed Wind Tunnel ◽  
Lift To Drag Ratio ◽  
Blunt Leading Edge

Abstract The aerodynamic performances of a non-slender 50° delta wing with various leading-edge bevels were measured in a low speed wind tunnel. It is found that the delta wing with leading-edge bevelled leeward can improve the maximum lift coefficient and maximum lift to drag ratio, and the stall angle of the wing is also delayed. In comparison with the blunt leading-edge wing, the increment of maximum lift to drag ratio is 200%, 98% and 100% for the wings with relative thickness t/c = 2%, t/c = 6.7% and t/c = 10%, respectively.

scholarly journals Numerical Analysis of Wind Turbine Airfoil Aerodynamic Performance with Leading Edge Bump

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Majid Asli ◽  
Behnam Mashhadi Gholamali ◽  
Abolghasem Mesgarpour Tousi
Keyword(s):  
Wind Turbine ◽  
Control Method ◽  
Flow Behavior ◽  
Renewable Energy Sources ◽  
Lift Coefficient ◽  
Turbine Blades ◽  
Vortex Generator ◽  
Leading Edge ◽  
Suction Side ◽  
Aerodynamic Performance

Aerodynamic performance improvement of wind turbine blade is the key process to improve wind turbine performance in electricity generated and energy conversion in renewable energy sources concept. The flow behavior on wind turbine blades profile and the relevant phenomena like stall can be improved by some modifications. In the present paper, Humpback Whales flippers leading edge protuberances model as a novel passive stall control method was investigated on S809 as a thick airfoil. The airfoil was numerically analyzed by CFD method in Reynolds number of 106and aerodynamic coefficients in static angle of attacks were validated with the experimental data reported by Somers in NREL. Therefore, computational results for modified airfoil with sinusoidal wavy leading edge were presented. The results revealed that, at low angles of attacks before the stall region, lift coefficient decreases slightly rather than baseline model. However, the modified airfoil has a smooth stall trend while baseline airfoil lift coefficient decreases sharply due to the separation which occurred on suction side. According to the flow physics over the airfoils, leading edge bumps act as vortex generator so vortices containing high level of momentum make the flow remain attached to the surface of the airfoil at high angle of attack and prevent it from having a deep stall.

Selected wind tunnel test results for the Darrieus wind turbine

1977 ◽  
Vol 1 (6) ◽  
pp. 382-386 ◽  
Author(s):  
B.F. Blackwell ◽  
R.E. Sheldahl
Keyword(s):  
Wind Tunnel ◽  
Wind Turbine ◽  
Wind Tunnel Test ◽  
Test Results

sHAWT Design: Airfoil Aerodynamics Under the Influence of Roughness

2016 ◽  
Author(s):  
D. Holst ◽  
G. Pechlivanoglou ◽  
C. T. Kohlrausch ◽  
C. N. Nayeri ◽  
C. O. Paschereit
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
High Performance ◽  
Experimental Testing ◽  
Lift Coefficient ◽  
Leading Edge ◽  
Small Surface ◽  
Horizontal Axis Wind Turbines ◽  
Low Reynolds ◽  
Utility Scale

Small horizontal axis wind turbines (sHAWTs) are mostly designed by smaller companies with no or just small possibilities of aerodynamic testing and hence, airfoil selection is often based on published performance data and minimal or no experimental testing from the blade designer’s side. This paper focuses on the aerodynamic consequences resulting from an unqualified airfoil selection and accumulating surface soiling. The high performance low Reynolds profile FX 63-137 is compared to an Eppler-338 wing section as well as to a high performance utility scale wind turbine airfoil, AH 93-W-174 -1ex. We extensively investigated these three different airfoils within the low Reynolds regime between 50,000 and 200,000. This regime is especially important for the starting behavior of a wind turbine, i.e. a quick speed up, and is crucial for small wind turbines because they have more frequent start/stop events. A Reynolds number of 200 k is additionally the operational regime of some sHAWT under the 5–10 kW level. The present study discusses not only the low Reynolds performance of the smooth profiles but investigates the influence of surface soiling. This ranges from 2D disturbances, such as a 0.2mm thin tripwire or several zigzag tapes, up to the simulation of massive sand build up by covering the entire leading edge region with a 40 grit sand paper. The experiments reveal that even small surface soiling has an impact and massive roughness leads in some cases to the loss of 50% in lift coefficient. The experimental data is used to simulate a sHAWT in different stages of debris. While the peak power was reduced by two thirds compared to the clean configuration the annual energy production has halved under certain conditions.

908 Leading Edge Separation Flow from Airfoil for Wind Turbine

2001 ◽  
Vol 2001 (0) ◽  
pp. 235-236
Author(s):  
Masatoshi Yano ◽  
Eizi Kato ◽  
Tutom Tachikawa
Keyword(s):  
Wind Turbine ◽  
Leading Edge ◽  
Separation Flow ◽  
Edge Separation
Sign in / Sign up

Export Citation Format

Share Document