The Transient Response of a Collagen Remodeling Theory Based on Strain-Dependent Collagen Degradation

2012 ◽  
Author(s):  
A. Cilingir ◽  
W. Wilson ◽  
K. Ito ◽  
C. C. van Donkelaar
Keyword(s):  
Transient Response ◽  
Collagen Degradation ◽  
Mechanical Stimuli ◽  
Loading Conditions ◽  
Collagen Orientation ◽  
Collagen Remodeling ◽  
Engineered Tissues ◽  
Strain Dependent

In vivo [1] and in vitro [2–4] studies show that cell and matrix alignment can be significantly affected by mechanical stimuli. Even in highly aligned engineered tissues, cells are able to remodel the collagen orientation when loading conditions are altered [4].

scholarly journals Long-Term Severe In Vitro Hypoxia Exposure Enhances the Vascularization Potential of Human Adipose Tissue-Derived Stromal Vascular Fraction Cell Engineered Tissues

2021 ◽  
Vol 22 (15) ◽  
pp. 7920
Author(s):  
Myroslava Mytsyk ◽  
Giulia Cerino ◽  
Gregory Reid ◽  
Laia Gili Sole ◽  
Friedrich S. Eckstein ◽  
...  
Keyword(s):  
Adipose Tissue ◽  
Therapeutic Potential ◽  
Stromal Vascular Fraction ◽  
Human Adipose Tissue ◽  
Bioreactor Culture ◽  
Proliferating Cells ◽  
Angiogenic Potential ◽  
Engineered Tissues

The therapeutic potential of mesenchymal stromal/stem cells (MSC) for treating cardiac ischemia strongly depends on their paracrine-mediated effects and their engraftment capacity in a hostile environment such as the infarcted myocardium. Adipose tissue-derived stromal vascular fraction (SVF) cells are a mixed population composed mainly of MSC and vascular cells, well known for their high angiogenic potential. A previous study showed that the angiogenic potential of SVF cells was further increased following their in vitro organization in an engineered tissue (patch) after perfusion-based bioreactor culture. This study aimed to investigate the possible changes in the cellular SVF composition, in vivo angiogenic potential, as well as engraftment capability upon in vitro culture in harsh hypoxia conditions. This mimics the possible delayed vascularization of the patch upon implantation in a low perfused myocardium. To this purpose, human SVF cells were seeded on a collagen sponge, cultured for 5 days in a perfusion-based bioreactor under normoxia or hypoxia (21% and <1% of oxygen tension, respectively) and subcutaneously implanted in nude rats for 3 and 28 days. Compared to ambient condition culture, hypoxic tension did not alter the SVF composition in vitro, showing similar numbers of MSC as well as endothelial and mural cells. Nevertheless, in vitro hypoxic culture significantly increased the release of vascular endothelial growth factor (p < 0.001) and the number of proliferating cells (p < 0.00001). Moreover, compared to ambient oxygen culture, exposure to hypoxia significantly enhanced the vessel length density in the engineered tissues following 28 days of implantation. The number of human cells and human proliferating cells in hypoxia-cultured constructs was also significantly increased after 3 and 28 days in vivo, compared to normoxia. These findings show that a possible in vivo delay in oxygen supply might not impair the vascularization potential of SVF- patches, which qualifies them for evaluation in a myocardial ischemia model.

STRETCHABLE Lab-on-Chip Device With Impedance Spectroscopy Capability for Mammalian Cell Studies

2016 ◽  
Author(s):  
Xudong Zhang ◽  
Anis Nurashikin Nordin ◽  
Fang Li ◽  
Ioana Voiculescu
Keyword(s):  
Impedance Spectroscopy ◽  
Mammalian Cells ◽  
Dynamic Environment ◽  
Cyclic Strain ◽  
Cyclic Stretch ◽  
Mechanical Stimuli ◽  
Aortic Endothelial Cells ◽  
Lab On Chip

This paper presents the fabrication and testing of electric cell-substrate impedance spectroscopy (ECIS) electrodes on a stretchable membrane. This is the first time when ECIS electrodes were fabricated on a stretchable substrate and ECIS measurements on mammalian cells exposed to cyclic strain of 10% were successfully demonstrated. A chemical was used to form strong chemical bond between gold electrodes of ECIS sensor and polymer membrane, which enable the electrodes keep good conductive ability during cyclic stretch. The stretchable membrane integrated with the ECIS sensor can simulate and replicate the dynamic environment of organism and enable the analysis of the cells activity involved in cells attachment and proliferation in vitro. Bovine aortic endothelial cells (BAEC) were used to evaluate the endothelial function influenced by mechanical stimuli in this research because they undergo in vivo cyclic physiologic elongation produced by the blood circulation in the arteries.

Tracings of Behavior of Myoblasts Cultured Under Couette Type of Shear Flow Between Parallel Disks

2021 ◽  
Author(s):  
Shigehiro Hashimoto ◽  
Hiroki Yonezawa
Keyword(s):  
Shear Stress ◽  
Shear Flow ◽  
Rotating Disk ◽  
Time Lapse ◽  
Mechanical Stimuli ◽  
Parallel Disks ◽  
Before And After ◽  
A Cell

Abstract A cell deforms and migrates on the scaffold under mechanical stimuli in vivo. In this study, a cell with division during shear stress stimulation has been observed in vitro. Before and after division, both migration and deformation of each cell were analyzed. To make a Couette-type shear flow, the medium was sandwiched between parallel disks (the lower stationary culture-disc and the upper rotating disk) with a constant gap. The wall shear stress (1.5 Pa &lt; τ &lt; 2 Pa) on the surface of the lower culture plate was controlled by the rotational speed of the upper disc. Myoblasts (C2C12: mouse myoblast cell line) were used in the test. After cultivation without flow for 24 hours for adhesion of the cells to the lower disk, constant τ was applied to the cells in the incubator for 7 days. The behavior of each cell during shear was tracked by time-lapse images observed by an inverted phase contrast microscope placed in the incubator. Experimental results show that each cell tends to divide after higher activities: deformation and migration. The tendency is remarkable at the shear stress of 1.5 Pa.

scholarly journals Cardiac and Skeletal Actin Substrates Uniquely Tune Cardiac Myosin Strain-Dependent Mechanics

2018 ◽  
Author(s):  
Yihua Wang ◽  
Katalin Ajtai ◽  
Thomas P. Burghardt
Keyword(s):  
Resistive Load ◽  
Step Size ◽  
Actin Isoforms ◽  
Cardiac Actin ◽  
N Terminus ◽  
Human Adults ◽  
Force Velocity ◽  
Strain Dependent

ABSTRACTNative cardiac ventricular myosin (βmys) translates actin under load by transducing ATP free energy into mechanical work on actin during muscle contraction. Unitary βmys translation of actin is the myosin step-size. In vitro and in vivo βmys regulates contractile force and velocity by remixing 3 different step-sizes with stepping frequencies autonomously adapted to workload. Cardiac and skeletal actin isoforms have a specific 1:4 stoichiometry in normal adult human ventriculum. Human adults with inheritable hypertrophic cardiomyopathy (HCM) up-regulate skeletal actin in ventriculum suggesting that increasing skeletal/cardiac actin stoichiometry also adapts myosin force-velocity to respond to the muscle’s inability to meet demand.Nanometer scale displacement of quantum dot (Qdot) labeled actin under resistive load when impelled by βmys measures single myosin force-velocity in vitro in the Qdot assay. Unitary displacement classification constraints introduced here better separates myosin based signal from background upgrading step-size spatial resolution to the sub-nanometer range. Single βmys force-velocity for skeletal vs cardiac actin substrates was compared using the Qdot assay.Two competing myosin strain-sensitive mechanisms regulate step-size choices dividing mechanical characteristics into low- and high-force regimes. The actin isoforms alter myosin strain-sensitive regulation such that onset of the high-force regime, where a short step-size is a large or major contributor, is offset to higher loads by a unique cardiac ELC N-terminus/cardiac-actin contact at Glu6/Ser358. It modifies βmys force-velocity by stabilizing the ELC N-terminus/cardiac-actin association. Uneven onset of the high-force regime for skeletal vs cardiac actin dynamically changes force-velocity characteristics as skeletal/cardiac actin fractional content increases in diseased muscle.

Effects of Hydrostatic Pressure on Meniscus Cell-Seeded PLLA Scaffolds

2007 ◽  
Author(s):  
Najmuddin J. Gunja ◽  
Kyriacos A. Athanasiou
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Hydrostatic Pressure ◽  
Mechanical Stimuli ◽  
Loading Conditions ◽  
Engineering Studies ◽  
Meniscus Cell ◽  
Intermittent Loading ◽  
Cartilage Explant

Cartilage explant studies have shown that mechanical stimuli increase extracellular matrix (ECM) expression and synthesis in vitro [1]. The use of hydrostatic pressure (HP), as a loading regimen, is of particular interest as it causes no cellular deformation. This may be useful in tissue engineering studies where scaffolds with limited mechanical integrity need to withstand intermittent loading conditions. Studies investigating the effect of HP on 3-D cultures of chondrocytes have met with modest success [2, 3]; however literature on meniscal fibrochondrocytes is lacking.

scholarly journals Strain-Dependent Impact of G and SH Deletions Provide New Insights for Live-Attenuated HMPV Vaccine Development

Vaccines ◽  
2019 ◽  
Vol 7 (4) ◽  
pp. 164 ◽  
Author(s):  
Julia Dubois ◽  
Andrés Pizzorno ◽  
Marie-Hélène Cavanagh ◽  
Blandine Padey ◽  
Claire Nicolas de Lamballerie ◽  
...  
Keyword(s):  
Vaccine Development ◽  
Specific Treatment ◽  
Respiratory Pathogen ◽  
Recombinant Viruses ◽  
Human Airway Epithelium ◽  
A Cell ◽  
Strain Dependent ◽  
Selection Of

Human metapneumovirus (HMPV) is a major pediatric respiratory pathogen with currently no specific treatment or licensed vaccine. Different strategies to prevent this infection have been evaluated, including live-attenuated vaccines (LAV) based on SH and/or G protein deletions. This approach showed promising outcomes but has not been evaluated further using different viral strains. In that regard, we previously showed that different HMPV strains harbor distinct in vitro fusogenic and in vivo pathogenic phenotypes, possibly influencing the selection of vaccine strains. In this study, we investigated the putative contribution of the low conserved SH or G accessory proteins in such strain-dependent phenotypes and generated recombinant wild type (WT) and SH- or G-deleted viruses derived from two different patient-derived HMPV strains, A1/C-85473 and B2/CAN98-75. The ΔSH and ΔG deletions led to different strain-specific phenotypes in both LLC-MK2 cell and reconstituted human airway epithelium models. More interestingly, the ΔG-85473 and especially ΔSH-C-85473 recombinant viruses conferred significant protection against HMPV challenge and induced immunogenicity against a heterologous strain. In conclusion, our results show that the viral genetic backbone should be considered in the design of live-attenuated HMPV vaccines, and that a SH-deleted virus based on the A1/C-85473 HMPV strain could be a promising LAV candidate as it is both attenuated and protective in mice while being efficiently produced in a cell-based system.

scholarly journals Living myocardial slices: a novel multicellular model for cardiac translational research

2019 ◽  
Vol 41 (25) ◽  
pp. 2405-2408 ◽  
Author(s):  
Filippo Perbellini ◽  
Thomas Thum
Keyword(s):  
Translational Research ◽  
Cardiac Tissue ◽  
Heart Function ◽  
Cell Types ◽  
Human Model ◽  
Mechanical Stimuli ◽  
Cardiovascular Research ◽  
Functional Changes

Abstract Heart function relies on the interplay of several specialized cell types and a precisely regulated network of chemical and mechanical stimuli. Over the last few decades, this complexity has often been undervalued and progress in translational cardiovascular research has been significantly hindered by the lack of appropriate research models. The data collected are often oversimplified and these make the translation of results from the laboratory to clinical trials challenging and occasionally misleading. Living myocardial slices are ultrathin (100–400μm) sections of living cardiac tissue that maintain the native multicellularity, architecture, and structure of the heart and can provide information at a cellular/subcellular level. They overcome most of the limitations that affect other in vitro models and they can be prepared from human specimens, proving a clinically relevant multicellular human model for translational cardiovascular research. The publication of a reproducible protocol, and the rapid progress in methodological and technological discoveries which prevent significant structural and functional changes associated with chronic in vitro culture, has overcome the last barrier for the in vitro use of this human multicellular preparations. This technology can bridge the gap between in vitro and in vivo human studies and has the potential to revolutionize translational research approaches.

Functional Tissue Engineering: The Role of Biomechanics

2000 ◽  
Vol 122 (6) ◽  
pp. 570-575 ◽  
Author(s):  
David L. Butler ◽  
Steven A. Goldstein ◽  
Farshid Guilak
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Physical Factors ◽  
Cellular Activity ◽  
Biosynthetic Activity ◽  
Functional Tissue Engineering ◽  
Functional Tissue ◽  
Engineered Tissues

“Tissue engineering” uses implanted cells, scaffolds, DNA, protein, and/or protein fragments to replace or repair injured or diseased tissues and organs. Despite its early success, tissue engineers have faced challenges in repairing or replacing tissues that serve a predominantly biomechanical function. An evolving discipline called “functional tissue engineering” (FTE) seeks to address these challenges. In this paper, the authors present principles of functional tissue engineering that should be addressed when engineering repairs and replacements for load-bearing structures. First, in vivo stress/strain histories need to be measured for a variety of activities. These in vivo data provide mechanical thresholds that tissue repairs/replacements will likely encounter after surgery. Second, the mechanical properties of the native tissues must be established for subfailure and failure conditions. These “baseline data” provide parameters within the expected thresholds for different in vivo activities and beyond these levels if safety factors are to be incorporated. Third, a subset of these mechanical properties must be selected and prioritized. This subset is important, given that the mechanical properties of the designs are not expected to completely duplicate the properties of the native tissues. Fourth, standards must be set when evaluating the repairs/replacements after surgery so as to determine, “how good is good enough?” Some aspects of the repair outcome may be inferior, but other mechanical characteristics of the repairs and replacements might be suitable. New and improved methods must also be developed for assessing the function of engineered tissues. Fifth, the effects of physical factors on cellular activity must be determined in engineered tissues. Knowing these signals may shorten the iterations required to replace a tissue successfully and direct cellular activity and phenotype toward a desired end goal. Finally, to effect a better repair outcome, cell-matrix implants may benefit from being mechanically stimulated using in vitro “bioreactors” prior to implantation. Increasing evidence suggests that mechanical stress, as well as other physical factors, may significantly increase the biosynthetic activity of cells in bioartificial matrices. Incorporating each of these principles of functional tissue engineering should result in safer and more efficacious repairs and replacements for the surgeon and patient. [S0148-0731(00)00206-5]

Mechanical stimulation of organogenic cardiomyocyte growth in vitro

1996 ◽  
Vol 270 (5) ◽  
pp. C1284-C1292 ◽  
Author(s):  
H. H. Vandenburgh ◽  
R. Solerssi ◽  
J. Shansky ◽  
J. W. Adams ◽  
S. A. Henderson
Keyword(s):  
Mechanical Load ◽  
Mechanical Stretch ◽  
Neonatal Rat ◽  
Cardiomyocyte Hypertrophy ◽  
Heart Cells ◽  
Mechanical Stimuli ◽  
Rat Cardiomyocytes ◽  
Morphological Alterations

Adherent cultures of neonatal rat cardiomyocytes were subjected to progressive, unidirectional lengthening for 2-4 days in serum-containing medium. This mechanical stretch (25% increase in initial length each day) simulates the eccentric mechanical load placed on in vivo heart cells by increases in postnatal blood pressure and volume. The in vitro mechanical stimuli initiated a number of morphological alterations in the confluent cardiomyocyte population which were similar to those occurring during in vivo heart growth. These include cardiomyocyte organization into parallel arrays of rod-shaped cells, increased cardiomyocyte binucleation, and cardiomyocyte hypertrophy by longitudinal cell growth. Stretch stimulated DNA synthesis in the noncardiomyocyte population but not in the cardiomyocytes. Myosin heavy chain (MHC) content increased 62% over 4 days of stretch and included increased accumulation of both fetal beta-MHC and adult alpha-MHC isoforms. This new model of stretch-induced cardiomyocyte hypertrophy may assist in examining some of the complex mechanogenic growth processes that occur in the rapidly enlarging neonatal heart.

scholarly journals Effects of Amoxicillin, Gentamicin, and Moxifloxacin on the Hemolytic Activity of Staphylococcus aureus In Vitro and In Vivo

2001 ◽  
Vol 45 (1) ◽  
pp. 196-202 ◽  
Author(s):  
Dieter Worlitzsch ◽  
Hayal Kaygin ◽  
Andrea Steinhuber ◽  
Axel Dalhoff ◽  
Konrad Botzenhart ◽  
...  
Keyword(s):  
Staphylococcus Aureus ◽  
Neutrophil Elastase ◽  
Human Neutrophil Elastase ◽  
Mssa Strain ◽  
Subinhibitory Concentrations ◽  
High Level ◽  
Strain Dependent ◽  
Negative Mutant

ABSTRACT In Staphylococcus aureus infection hemolysis caused by the extracellular protein α-toxin encoded by hla is thought to contribute significantly to its multifactorial virulence. In vitro, subinhibitory concentrations of β-lactam antibiotics and fluoroquinolones increase the levels of hla and α-toxin expression, whereas aminoglycosides decrease the levels ofhla and α-toxin expression. In the present study we investigated the effects of subinhibitory concentrations of amoxicillin, gentamicin, and moxifloxacin on hla and α-toxin expression and total hemolysis of S. aureusstrain 8325-4, a high-level α-toxin producer, and its α-toxin-negative mutant, DU 1090, in vitro and in a rat model of chronic S. aureus infection. The levels of expression ofhla and α-toxin and total hemolysis did not differ significantly when amoxicillin, gentamicin, or moxifloxacin was added to cultures of S. aureus strain 8325-4. In vivo, strain 8325-4 induced a significantly increased level of hemolysis in infected pouches compared to that in uninfected control pouches, but the hemolysis was reduced to control levels by treatment with doses of amoxicillin, gentamicin, or moxifloxacin that reduced bacterial numbers by 2 orders of magnitude. Additionally, the effects of subinhibitory concentrations of the three antibiotics on total hemolysis of four methicillin-resistant S. aureus and three methicillin-sensitive S. aureus (MSSA) clinical isolates were assessed in vitro. A significant increase in total hemolysis was observed for only one MSSA strain when it was treated with amoxicillin but not when it was treated with moxifloxacin or gentamicin. When purified α-toxin was incubated with purified human neutrophil elastase, α-toxin was cleaved nearly completely. The results suggest that the penicillin-induced increases in S. aureusα-toxin expression are strain dependent, that reduction of bacterial numbers in vivo counteracts this phenomenon effectively, and finally, that in localized S. aureus infections α-toxin activity is controlled by neutrophil elastase.

Sign in / Sign up

Export Citation Format

Share Document