In-Vitro Blood Flow and Wall Shear Stress Measurements in Idealised and Patient Specific Models of the Carotid Artery Bifurcation

2008 ◽  
Author(s):  
Nicolas A. Buchmann ◽  
Mark C. Jermy
Keyword(s):  
Shear Stress ◽  
Carotid Artery ◽  
Wall Shear Stress ◽  
Three Dimensional ◽  
Patient Specific ◽  
Specific Geometry ◽  
Wall Shear ◽  
Magnetic Resonance Imaging Mri ◽  
Vitro Model

This work presents Particle Image Velocimetry (PIV) measurements in idealised and patient specific human carotid artery bifurcations (CAB) under steady and pulsatile flow. The geometry and corresponding boundary conditions were obtained by Magnetic Resonance Imaging (MRI) and replicated in an in-vitro model. A complex three-dimensional flow structure exists inside the CAB and vorticity and wall shear stress data are used to quantify the differences between the idealised and patient specific geometry.

Inflammatory Response of Endothelial Cells to Wall Shear Stress in Three Dimensional Stenotic Models

2009 ◽  
Author(s):  
Leonie Rouleau ◽  
Joanna Rossi ◽  
Jean-Claude Tardif ◽  
Rosaire Mongrain ◽  
Richard L. Leask
Keyword(s):  
Endothelial Cells ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Three Dimensional ◽  
Realistic Model ◽  
In Vitro Models ◽  
Steady Flows ◽  
Wall Shear

Endothelial cells (ECs) are believed to respond differentially to hemodynamic forces in the vascular tree. Once atherosclerotic plaque has formed in a vessel, the obstruction creates complex spatial gradients in wall shear stress (WSS). In vitro models have used mostly unrealistic and simplified geometries, which cannot reproduce accurately physiological conditions. The objective of this study was to expose ECs to the complex WSS pattern created by an asymmetric stenosis. Endothelial cells were grown and exposed for different times to physiological steady flows in straight dynamic controls and in idealized asymmetric stenosis models. Cell morphology was noticeably different in the regions with spatial WSS gradients, being more randomly oriented and of cobblestone shape. Inflammatory molecule expression was also altered by exposure to shear and endothelial nitric oxide synthase (eNOS) was upregulated by its presence. A regional response in terms of inflammation was observed through confocal microscopy. This work provides a more realistic model to study endothelial cell response to spatial and temporal WSS gradients that are present in vivo and is an important advancement towards a better understanding of the mechanisms involved in coronary artery disease.

Analysis of Flow Disturbance in a Stenosed Carotid Artery Bifurcation Using Two-Equation Transitional and Turbulence Models

2008 ◽  
Vol 130 (6) ◽  
Author(s):  
F. P. P. Tan ◽  
G. Soloperto ◽  
S. Bashford ◽  
N. B. Wood ◽  
S. Thom ◽  
...  
Keyword(s):  
Shear Stress ◽  
Carotid Artery ◽  
Laminar Flow ◽  
Wall Shear Stress ◽  
Turbulence Models ◽  
Carotid Bifurcation ◽  
Patient Specific ◽  
Shear Stresses ◽  
Zone Length ◽  
Wall Shear

In this study, newly developed two-equation turbulence models and transitional variants are employed for the prediction of blood flow patterns in a diseased carotid artery where the growth, progression, and structure of the plaque at rupture are closely linked to low and oscillating wall shear stresses. Moreover, the laminar-turbulent transition in the poststenotic zone can alter the separation zone length, wall shear stress, and pressure distribution over the plaque, with potential implications for stresses within the plaque. Following the validation with well established experimental measurements and numerical studies, a magnetic-resonance (MR) image-based model of the carotid bifurcation with 70% stenosis was reconstructed and simulated using realistic patient-specific conditions. Laminar flow, a correlation-based transitional version of Menter’s hybrid k‐ϵ∕k‐ω shear stress transport (SST) model and its “scale adaptive simulation” (SAS) variant were implemented in pulsatile simulations from which analyses of velocity profiles, wall shear stress, and turbulence intensity were conducted. In general, the transitional version of SST and its SAS variant are shown to give a better overall agreement than their standard counterparts with experimental data for pulsatile flow in an axisymmetric stenosed tube. For the patient-specific case reported, the wall shear stress analysis showed discernable differences between the laminar flow and SST transitional models but virtually no difference between the SST transitional model and its SAS variant.

scholarly journals Multiscale Modeling of Endothelium Derived Wall Shear Stress Regulation in Common Carotid Artery

2019 ◽  
Vol 35 (6) ◽  
pp. 901-914
Author(s):  
Saeed Siri ◽  
Malikeh Nabaei ◽  
Nasser Fatouraee
Keyword(s):  
Mechanical Properties ◽  
Shear Stress ◽  
Carotid Artery ◽  
Wall Shear Stress ◽  
Common Carotid Artery ◽  
3D Model ◽  
Stable Condition ◽  
Patient Specific ◽  
Local Flow ◽  
Wall Shear

ABSTRACTShear induced autoregulation is the natural ability of organs to maintain the local hemodynamic stresses in a stable condition in spite of altering perfusion rate. Endothelium cells are shear sensitive mechanoreceptors that are responsible for regulating the arterial wall architecture and mechanical properties in order to maintain homeostasis. This occurs by means of vasoactive mediators, which cause vasodilation or vasoconstriction. In this paper we presented a multiscale model of local flow regulation. First, a lumped parameter model of the whole cardiovascular system was implemented. Then a 3D numerical model of human common carotid artery was constructed considering fluid-structure interaction. The CCA inflow waveform obtained from the extended 0D model was applied to the 3D model as the boundary condition. After applying the Head-Up Tilt test, the local hemodynamics were disturbed. By considering the wall shear stress as the regulation criterion, then altering the arterial mechanical properties and the following vasodilation, shear forces exerted on the inner lining of the vessel were regulated and returned to the normal range. The resulting 0D/3D model can be considered as a plat-form for a more complete model containing local and systemic cardiovascular control mechanisms and patient-specific geometries which can be used for clinical purposes.

scholarly journals Computational Fluid Dynamics Characterization of Two Patient-Specific Systemic-to-Pulmonary Shunts before and after Operation

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Neichuan Zhang ◽  
Haiyun Yuan ◽  
Xiangyu Chen ◽  
Jiawei Liu ◽  
Qifei Jian ◽  
...  
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Pulmonary Artery ◽  
Energy Loss ◽  
Three Dimensional ◽  
Left Pulmonary Artery ◽  
Postoperative Recovery ◽  
Patient Specific ◽  
Wall Shear ◽  
Ct Data

Studying the haemodynamics of the central shunt (CS) and modified Blalock–Taussig shunt (MBTS) benefits the improvement of postoperative recovery for patients with an aorta-pulmonary shunt. Shunt configurations, including CS and MBTS, are virtually reconstructed for infants A and B based on preoperative CT data, and three-dimensional models of A, 11 months after CS, and B, 8 months after MBTS, are reconstructed based on postoperative CT data. A series of parameters including energy loss, wall shear stress, and shunt ratio are computed from simulation to analyse the haemodynamics of CS and MBTS. Our results showed that the shunt ratio of the CS is approximately 30% higher than the MBTS and velocity distribution in the left pulmonary artery (LPA) and right pulmonary artery (RPA) was closer to a natural development in the CS than the MBTS. However, energy loss of the MBTS is lower, and the MBTS can provide more symmetric pulmonary artery (PA) flow than the CS. With the growth of infants A and B, the shunt ratio of infants was decreased, but maximum wall shear stress and the distribution region of high wall shear stress (WSS) were increased, which raises the probability of thrombosis. For infant A, the preoperative abnormal PA structure directly resulted in asymmetric growth of PA after operation, and the LPA/RPA ratio decreased from 0.49 to 0.25. Insufficient reserved length of the MBTS led to traction phenomena with the growth of infant B; on the one hand, it increased the eddy current, and on the other hand, it increased the flow resistance of anastomosis, promoting asymmetric PA flow.

Hemodynamics in growing and stable cerebral aneurysms

2015 ◽  
Vol 8 (4) ◽  
pp. 407-412 ◽  
Author(s):  
Daniel M Sforza ◽  
Kenichi Kono ◽  
Satoshi Tateshima ◽  
Fernando Viñuela ◽  
Christopher Putman ◽  
...  
Keyword(s):  
Shear Stress ◽  
Logistic Regression ◽  
Wall Shear Stress ◽  
Statistical Models ◽  
Three Dimensional ◽  
Cerebral Aneurysms ◽  
Patient Specific ◽  
Unruptured Aneurysms ◽  
Aspect Ratios ◽  
Wall Shear

ObjectiveThe detailed mechanisms of cerebral aneurysm evolution are poorly understood but are important for objective aneurysm evaluation and improved patient management. The purpose of this study was to identify hemodynamic conditions that may predispose aneurysms to growth.MethodsA total of 33 intracranial unruptured aneurysms longitudinally followed with three-dimensional imaging were studied. Patient-specific computational fluid dynamics models were constructed and used to quantitatively characterize the hemodynamic environments of these aneurysms. Hemodynamic characteristics of growing (n=16) and stable (n=17) aneurysms were compared. Logistic regression statistical models were constructed to test the predictability of aneurysm growth by hemodynamic features.ResultsGrowing aneurysms had significantly smaller shear rate ratios (p=0.01), higher concentration of wall shear stress (p=0.03), smaller vorticity ratios (p=0.01), and smaller viscous dissipation ratios (p=0.01) than stable aneurysms. They also tended to have larger areas under low wall shear stress (p=0.06) and larger aspect ratios (p=0.18), but these trends were not significant. Mean wall shear stress was not significantly different between growing and stable aneurysms. Logistic regression models based on hemodynamic variables were able to discriminate between growing and stable aneurysms with a high degree of accuracy (94–100%).ConclusionsGrowing aneurysms tend to have complex intrasaccular flow patterns that induce non-uniform wall shear stress distributions with areas of concentrated high wall shear stress and large areas of low wall shear stress. Statistical models based on hemodynamic features seem capable of discriminating between growing and stable aneurysms.

scholarly journals A PIV COMPARISON OF THE FLOW FIELD AND WALL SHEAR STRESS IN RIGID AND COMPLIANT MODELS OF HEALTHY CAROTID ARTERIES

2016 ◽  
Vol 17 (03) ◽  
pp. 1750041 ◽  
Author(s):  
PATRICK H. GEOGHEGAN ◽  
MARK C. JERMY ◽  
DAVID S. NOBES
Keyword(s):  
Shear Stress ◽  
Carotid Artery ◽  
Wall Shear Stress ◽  
Flow Field ◽  
Mechanical Response ◽  
Circulatory System ◽  
Rigid Boundary ◽  
Numerical Predictions ◽  
Wall Shear

Certain systems relevant to circulatory disease have walls which are neither rigid nor static, for example, the coronary arteries, the carotid artery and the heart chambers. In vitro modeling allows the fluid mechanics of the circulatory system to be studied without the ethical and safety issues associated with animal and human experiments. Computational methods in which the equations are coupled governing the flow and the elastic walls are maturing. Currently there is a lack of experimental data in compliant arterial systems to validate the numerical predictions. Previous experimental work has commonly used rigid wall boundaries, ignoring the effect of wall compliance. Particle Image Velocimetry is used to provide a direct comparison of both the flow field and wall shear stress (WSS) observed in experimental phantoms of rigid and compliant geometries representing an idealized common carotid artery. The input flow waveform and the mechanical response of the phantom are physiologically realistic. The results show that compliance affects the velocity profile within the artery. A rigid boundary causes severe overestimation of the peak WSS with a maximum relative difference of 61% occurring; showing compliance protects the artery from exposure to high magnitude WSS. This is important when trying to understand the development of diseases like atherosclerosis. The maximum, minimum and time averaged WSS in the rigid geometry was 2.3, 0.51 and 1.03[Formula: see text]Pa and in the compliant geometry 1.4, 0.58 and 0.84[Formula: see text]Pa, respectively.

In Vitro Study on Branch Flows with a Cerebral Aneurysm

2008 ◽  
Vol 33-37 ◽  
pp. 1037-1042 ◽  
Author(s):  
Atsushi Osao ◽  
Gulbahar Wahap ◽  
Yoko Takakura ◽  
Norio Arai ◽  
Yoshifumi Konishi ◽  
...  
Keyword(s):  
Reynolds Number ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Cerebral Arteries ◽  
Three Dimensional ◽  
Lower Reynolds Number ◽  
Middle Cerebral Arteries ◽  
Wall Shear ◽  
Elemental Nature

The purpose of this study is to accumulate data to predict the ruptures of aneurysms on the bifurcation of the middle cerebral arteries at the base of the brain. Particular stress is laid on understanding the elemental nature of branch flows with/without an aneurysm. Therefore, “flow patterns” and “wall shear stress”, which are important factors for the causes of ruptures, are investigated by the three-dimensional experiments in vitro and the two-dimensional numerical simulations with simplified models. In the branch arteries without an aneurysm, there is a possibility of growing aneurysms at the location slightly away from a stagnation point. If an aneurysm forms into a centrosymmetric shape for the inlet axis, it is considered that they tend to grow further in a symmetrical plane. From the viewpoint of the risk of ruptures, recirculation flows become problematic with the lower Reynolds number, while the influence of wall shear stress becomes larger with the higher Reynolds number.

Endothelial Cell Migration in Patient-Specific Models of Intracranial Aneurysm

2010 ◽  
Author(s):  
Liang-Der Jou
Keyword(s):  
Endothelial Cells ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Morphological Changes ◽  
Critical Role ◽  
Endothelial Cell Migration ◽  
Patient Specific ◽  
Shear Stresses ◽  
Wall Shear

Effects of wall shear stress on atherosclerotic disease are widely studied, but its effects on intracranial aneurysms are less clear. In vitro studies have demonstrated that endothelial cells (EC) go through morphological changes under abnormal wall shear stress, and these studies have also shown that abnormal wall shear stresses lead to a non-uniform EC distributions [1, 2]. Since endothelial cells play a critical role in mechanotransduction, a sub-optimal distribution of EC may affect remodeling of vessel wall.

Sign in / Sign up

Export Citation Format

Share Document