Development of Prediction Equations on Charpy Upper Shelf Energy for Japanese RPV Steels

2003 ◽  
Author(s):  
Kazunobu Sakamoto ◽  
Takatoshi Hirota ◽  
Toru Osaki ◽  
Minoru Tomimatsu
Keyword(s):  
Regression Analyses ◽  
Prediction Equations ◽  
Shelf Energy ◽  
Absorbed Energy ◽  
Integrity Assessment ◽  
Ductile Brittle Transition Temperature ◽  
Test Reactor ◽  
Charpy Absorbed Energy ◽  
Shelf Region ◽  
Reactor Pressure

It is well known that as the embrittlement due to neutron irradiation on reactor pressure vessel (RPV) steels, there is the tendency of the reduction of Charpy absorbed energy at upper shelf region (USE), in addition to the shift of ductile-brittle transition temperature. Concerning to the regulation of the upper shelf region, no method is provided to evaluate integrity for RPV steels with USE of less than 68J in Japanese codes. Under the circumstance, the reduction tendency of USE using simulated Japanese RPV steels, irradiated by fast neutron up to 1024n/m2 in OECD Halden test reactor, was investigated to establish the basis of the USE prediction after 60 years plant operation for the integrity assessment of the RPVs. The USE prediction equations have been developed through the regression analyses of the test reactor data combined with Japanese surveillance test data. This research was entrusted by the Ministry of Economy, Trade and Industry in Japan.

Reactor Pressure Vessel Integrity Assessment: French Simplified Analysis Method Applied to Underclad Postulated Defect in Nozzle

2016 ◽  
Author(s):  
Adolfo Arrieta-Ruiz ◽  
Eric Meister ◽  
Stéphane Vidard
Keyword(s):  
Fracture Mechanics ◽  
Fracture Risk ◽  
Pressure Vessel ◽  
Reactor Pressure Vessel ◽  
Core Area ◽  
Integrity Assessment ◽  
Elastic Plastic ◽  
The Core ◽  
Simplified Method ◽  
Reactor Pressure

Structural integrity of the Reactor Pressure Vessel (RPV) is one of the main concerns regarding safety and lifetime of Nuclear Power Plants (NPP) since this component is considered as not reasonably replaceable. Fast fracture risk is the main potential damage considered in the integrity assessment of RPV. In France, deterministic integrity assessment for RPV vis-à-vis the brittle fracture risk is based on the crack initiation stage. As regards the core area in particular, the stability of an under-clad postulated flaw is currently evaluated under a Pressurized Thermal Shock (PTS) through a dedicated fracture mechanics simplified method called “beta method”. However, flaw stability analyses are also carried-out in several other areas of the RPV. Thence-forward performing uniform simplified inservice analyses of flaw stability is a major concern for EDF. In this context, 3D finite element elastic-plastic calculations with flaw modelling in the nozzle have been carried out recently and the corresponding results have been compared to those provided by the beta method, codified in the French RSE-M code for under-clad defects in the core area, in the most severe events. The purpose of this work is to validate the employment of the core area fracture mechanics simplified method as a conservative approach for the under-clad postulated flaw stability assessment in the complex geometry of the nozzle. This paper presents both simplified and 3D modelling flaw stability evaluation methods and the corresponding results obtained by running a PTS event. It shows that the employment of the “beta method” provides conservative results in comparison to those produced by elastic-plastic calculations for the cases here studied.

French RPV PTS Assessment: An Overview of EDF Research and Development in Progress on Thermalhydraulic, Materials and Mechanical Aspects

2003 ◽  
Author(s):  
Dominique Moinereau ◽  
Jean-Michel Frund ◽  
Henriette Churier-Bossennec ◽  
Georges Bezdikian ◽  
Alain Martin
Keyword(s):  
Structural Integrity ◽  
Three Dimensional ◽  
Crack Arrest ◽  
Pressure Vessels ◽  
Short Description ◽  
Constraint Effect ◽  
Materials Properties ◽  
Integrity Assessment ◽  
Pressurized Thermal Shock ◽  
Reactor Pressure

A significant extensive Research & Development work is conducted by Electricite´ de France (EDF) related to the structural integrity re-assessment of the French 900 and 1300 MWe reactor pressure vessels in order to increase their lifetime. Within the framework of this programme, numerous developments have been implemented or are in progress related to the methodology to assess flaws during a pressurized thermal shock (PTS) event. The paper contains three aspects: a short description of the specific French approach for RPV PTS assessment, a presentation of recent improvements on thermalhydraulic, materials and mechanical aspects, and finally an overview of the present R&D programme on thermalhydraulic, materials and mechanical aspects. Regarding the last aspect on present R&D programme, several projects in progress will be shortly described. This overview includes the redefinition of some significant thermalhydraulic transients based on some new three-dimensional CFD computations (focused at the present time on small break LOCA transient), the assessment of vessel materials properties, and the improvement of the RPV PTS structural integrity assessment including several themes such as warm pre-stress (WPS), crack arrest, constraint effect ....

Probabilistic Structural Integrity Analysis of Reactor Pressure Vessels During Pressurized Thermal Shock Events

2013 ◽  
Vol 136 (1) ◽  
Author(s):  
Koichi Masaki ◽  
Jinya Katsuyama ◽  
Kunio Onizawa
Keyword(s):  
Crack Initiation ◽  
Thermal Shock ◽  
Structural Integrity ◽  
Fracture Probability ◽  
Pressure Vessels ◽  
Sensitivity Analyses ◽  
Conditional Probabilities ◽  
Integrity Assessment ◽  
Pressurized Thermal Shock ◽  
Reactor Pressure

To apply a probabilistic fracture mechanics (PFM) analysis to the structural integrity assessment of a reactor pressure vessel (RPV), a PFM analysis code has been developed at JAEA. Using this PFM analysis code, pascal version 3, the conditional probabilities of crack initiation (CPIs) and fracture for an RPV during pressurized thermal shock (PTS) events have been analyzed. Sensitivity analyses on certain input parameters were performed to clarify their effect on the conditional fracture probability. Comparisons between the conditional probabilities and the temperature margin (ΔTm) based on the current deterministic analysis method were made for various model plant conditions for typical domestic older types of RPVs. From the analyses, a good correlation between ΔTm and the conditional probability of crack initiation was obtained.

Fracture Toughness of Highly Irradiated Pressure Vessel Steels in the Upper Shelf Temperature

2006 ◽  
Author(s):  
Hiroshi Matsuzawa ◽  
Toru Osaki
Keyword(s):  
Fracture Toughness ◽  
Chemical Composition ◽  
Reference Material ◽  
Fast Neutron ◽  
Pressure Vessel ◽  
Charpy Impact ◽  
Pressure Vessels ◽  
Shelf Energy ◽  
Pressure Vessel Steels ◽  
Reactor Pressure

Nine Reactor Pressure Vessel (RPV) Steels and four RPV weld were irradiated up to 1.2 × 1024n/m2 fast neutron fluence (E>1MeV), and their fracture toughness and Charpy impact energy were measured. As chemical compositions, such as Cu, are known to affect the fracture toughness reduction due to neutron exposure, the above steels were fabricated by changing chemical composition widely to cover the chemical composition of the RPV materials of the operating Japanese nuclear power plants. 2.7 mm thick compact specimens were used to measure the upper shelf fracture toughness of highly irradiated materials, and their Charpy upper shelf energy was also measured. By correlating Charpy upper shelf energy to fracture toughness, the upper shelf fracture toughness evaluation formulae for highly irradiated reactor pressure vessel steels were developed. Both compact and V-notched Charpy impact specimens were irradiated in a test reactor. The fast neutron flux above 1MeV was about 5 × 1016n/(m2s). Charpy impact specimens made of Japanese PWR reference material containing 0.09w% Cu were irradiated simultaneously. The upper shelf energy of the reference material up to the medium fluence level showed little difference in the reduction of upper shelf energy to that which had been in the operating plant and which was irradiated to the same fluence. The developed correlation formulae have been adopted in the Japan Electric Association Code as new formulae to predict the fracture toughness in the upper shelf region of reactor pressure vessels. They will be applied to time limited ageing analysis of low upper shelf reactor pressure vessels in Japan, on a concrete technical basis in very high fluence regions.

Upgrading the Operational Safety of Nuclear Power Plants Through the TACIS Nuclear Safety Assistance Programme

2004 ◽  
Author(s):  
M. Bie`th ◽  
R. Ahlstrand ◽  
C. Rieg ◽  
P. Trampus
Keyword(s):  
European Commission ◽  
Pressure Vessel ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Nuclear Safety ◽  
Reactor Pressure Vessel ◽  
Nuclear Safeguards ◽  
Integrity Assessment ◽  
Reactor Pressure

The European Union’ TACIS programme was established for the New Independent States since 1991. One priority for TACIS funding is nuclear safety. The European Commission has made available a total of € 944 million for nuclear safety programmes covering the period 1991–2003. The TACIS nuclear safety programme is devoted to the improvement of the safety of Soviet designed nuclear installations in providing technology and safety culture transfer. The Joint Research Center (JRC) of the European Commission is carrying out works in the following areas: • On-Site Assistance for TACIS Nuclear Power Plants; • Design Safety and Dissemination of TACIS results; • Reactor Pressure Vessel Embrittlement for VVER in Russia and Ukraine; • Regulatory Assistance; • Industrial Waste Management and Nuclear Safeguards. This paper gives an overview of the Scientific and Technical support that JRC is providing for the programming and the implementation of the TACIS nuclear safety programmes. In particular, two new projects are being implemented to get an extensive understanding of the VVER reactor pressure vessel embritttlement and integrity assessment.

Probabilistic Assessments of the Reactor Pressure Vessel Structural Integrity: Direct Coupling Between Probabilistic and Finite-Element Codes to Model Sensitivity to Key Thermo-Hydraulic Variability

2004 ◽  
Author(s):  
Etienne de Rocquigny ◽  
Yoan Chevalier ◽  
Silvia Turato ◽  
Eric Meister
Keyword(s):  
Finite Element ◽  
Pressure Vessel ◽  
Mechanical Model ◽  
Analytical Approach ◽  
Structural Integrity ◽  
Reactor Pressure Vessel ◽  
Direct Coupling ◽  
Integrity Assessment ◽  
Key Variables ◽  
Reactor Pressure

The structural integrity assessment of a nuclear Reactor Pressure Vessel (RPV) during accidental conditions such as loss-of-coolant accident (LOCA) is a major safety concern. Besides conventional deterministic calculations to justify as a nuclear operator the RPV integrity, Electricite´ de France (EDF) carries out probabilistic analyses. Probabilistic analyses become most interesting when some key variables, albeit conventionally taken at conservative values, can be modelled more accurately through statistical variability. In the context of low failure probabilities, this requires however a specific coupling effort between a specific probabilistic analysis method (e.g. Form-Sorm method) and the thermo-mechanical model to be reasonable in computing time. In this paper, the variability of a key variable — the mid-transient cooling temperature, tied to a climate-dependent tank — has been modelled, in some flaw configurations (axial sub-clad) for a French vessel. In a first step, a simplified analytical approach was carried out to assess its sensitivity upon the thermo-mechanical phenomena; hence, a direct coupling had to be implemented to allow a probabilistic calculation on the finite-element mechanical model, taking also into account a failure event properly defined through minimisation of the instantaneous failure margin during the transient. Comparison with the previous (indirectly-coupled) studies and the simplified analytical approach is drawn, demonstrating the interest of this new modelling effort to understand and order the sensitivity of the probability of crack initiation to the key variables. While being noticeable in the cases studied, sensitivity to the safety injection temperature variability proves to be less than the choice of the toughness model. Finally, regularity of the thermo-mechanical model is evidenced by the coupling exercise, suggesting that a modified response-surface based method could replace direct coupling for further investigation.

Sign in / Sign up

Export Citation Format

Share Document