The Simulation of Apparent Directional Emissivity in a Three-Dimensional Non-Isothermal Medium by the DRESOR Method

2011 ◽  
Author(s):  
Qiang Cheng ◽  
Xiang-Yu Zhang ◽  
Zhi-Chao Wang ◽  
Huai-Chun Zhou ◽  
Lv-Bin Wu
Keyword(s):  
Absorption Coefficient ◽  
Glass Melting ◽  
Three Dimensional ◽  
Heating Furnace ◽  
New Method ◽  
Scattering Coefficient ◽  
New Approach ◽  
Isothermal Medium ◽  
Directional Emissivity ◽  
Industrial Heating

The emissivity as a thermal property plays an important role required for heat transfer calculations and temperature measurement. In an isothermal purely absorption medium, the emissivity can be calculated by the formula, but no general formula for the emissivity will suit the system with scattering of medium and reflection of walls in a coal-fired boiler or an industrial heating furnace. In this study, a new approach was proposed to scale the apparent field directional emissivity by DRESOR method combined with two-color method in a three-dimensional non-isothermal participating medium with reflection of walls. The results obtained by the new method were compared with those calculated by the formula to verify the validity and accuracy of new method in an isothermal purely absorption medium. Then the new method was extended to examine the effect of absorption coefficient, scattering coefficient and reflection of walls on the apparent directional emissivity in the isothermal and non-isothermal cases. It is found that when there is scattering in the medium, the emissivity cannot be equal to the entity, even if the medium is optically thick. In the condition of walls with cold or low temperature, such as in the case of a coal-fired boiler, the apparent emissivity increases with the increase of absorption coefficient and reflectivity of walls, because radiation from hot media plays a dominated role in emissivity in this situation; Meanwhile, in the case of walls with high temperature, such as in the case of an industrial heating furnace in metallurgy or glass melting industry, the apparent emissivity decreases with the increase of absorption coefficient, because the emissivity is mainly determined by the wall radiation in this situation. And when scattering coefficient increases, the apparent emissivity decreases for all isothermal and non-isothermal cases.

scholarly journals TRACER. A new approach to comparative modeling that combines threading with free-space conformational sampling.

2010 ◽  
Vol 57 (1) ◽  
Author(s):  
Sebastian Trojanowski ◽  
Aleksandra Rutkowska ◽  
Andrzej Kolinski
Keyword(s):  
Force Field ◽  
Sequence Similarity ◽  
Three Dimensional ◽  
Comparative Modeling ◽  
Query Protein ◽  
New Method ◽  
Conformational Space ◽  
Coarse Grained ◽  
Conformational Search ◽  
New Approach

A new approach to comparative modeling of proteins, TRACER, is described and benchmarked against classical modeling procedures. The new method unifies true three-dimensional threading with coarse-grained sampling of query protein conformational space. The initial sequence alignment of a query protein with a template is not required, although a template needs to be somehow identified. The template is used as a multi-featured fuzzy three-dimensional scaffold. The conformational search for the query protein is guided by intrinsic force field of the coarse-grained modeling engine CABS and by compatibility with the template scaffold. During Replica Exchange Monte Carlo simulations the model chain representing the query protein finds the best possible structural alignment with the template chain, that also optimizes the intra-protein interactions as approximated by the knowledge based force field of CABS. The benchmark done for a representative set of query/template pairs of various degrees of sequence similarity showed that the new method allows meaningful comparative modeling also for the region of marginal, or non-existing, sequence similarity. Thus, the new approach significantly extends the applicability of comparative modeling.

scholarly journals A new method for detecting solar atmospheric gravity waves

2020 ◽  
Vol 379 (2190) ◽  
pp. 20200178 ◽  
Author(s):  
Daniele Calchetti ◽  
Stuart M. Jefferies ◽  
Bernhard Fleck ◽  
Francesco Berrilli ◽  
Dmitriy V. Shcherbik
Keyword(s):  
Solar Atmosphere ◽  
Gravity Waves ◽  
Three Dimensional ◽  
Internal Gravity Waves ◽  
New Method ◽  
Ample Evidence ◽  
New Approach ◽  
Wave Dynamics ◽  
Atmospheric Gravity ◽  
Lower Solar Atmosphere

Internal gravity waves have been observed in the Earth’s atmosphere and oceans, on Mars and Jupiter, and in the Sun’s atmosphere. Despite ample evidence for the existence of propagating gravity waves in the Sun’s atmosphere, we still do not have a full understanding of their characteristics and overall role for the dynamics and energetics of the solar atmosphere. Here, we present a new approach to study the propagation of gravity waves in the solar atmosphere. It is based on calculating the three-dimensional cross-correlation function between the vertical velocities measured at different heights. We apply this new method to a time series of co-spatial and co-temporal Doppler images obtained by SOHO/MDI and Hinode/SOT as well as to simulations of upward propagating gravity wave-packets. We show some preliminary results and outline future developments. This article is part of the Theo Murphy meeting issue ‘High-resolution wave dynamics in the lower solar atmosphere’.

Estimating Pigment Concentrations from Spectral Images Using an Encoder‐Decoder Neural Network

2020 ◽  
Vol 64 (3) ◽  
pp. 30502-1-30502-15
Author(s):  
Kensuke Fukumoto ◽  
Norimichi Tsumura ◽  
Roy Berns
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Absorption Coefficient ◽  
Spectral Data ◽  
High Accuracy ◽  
Pigment Concentration ◽  
Scattering Coefficient ◽  
A Value ◽  
Input And Output ◽  
Pigment Concentrations

Abstract A method is proposed to estimate the concentration of pigments mixed in a painting, using the encoder‐decoder model of neural networks. The model is trained to output a value that is the same as its input, and its middle output extracts a certain feature as compressed information about the input. In this instance, the input and output are spectral data of a painting. The model is trained with pigment concentration as the middle output. A dataset containing the scattering coefficient and absorption coefficient of each of 19 pigments was used. The Kubelka‐Munk theory was applied to the coefficients to obtain many patterns of synthetic spectral data, which were used for training. The proposed method was tested using spectral images of 33 paintings, which showed that the method estimates, with high accuracy, the concentrations that have a similar spectrum of the target pigments.

A New Approach for the Analysis of Mixture Toxicity Data

1992 ◽  
Vol 26 (9-11) ◽  
pp. 2345-2348 ◽  
Author(s):  
C. N. Haas
Keyword(s):  
Quantitative Analysis ◽  
Mixture Toxicity ◽  
New Method ◽  
Metal Exposure ◽  
Positive Interactions ◽  
Toxicity Data ◽  
Data Set ◽  
New Approach ◽  
Negative Interactions

A new method for the quantitative analysis of multiple toxicity data is described and illustrated using a data set on metal exposure to copepods. Positive interactions are observed for Ni-Pb and Pb-Cr, with weak negative interactions observed for Ni-Cr.

scholarly journals A New Method to Evaluate Trueness and Precision of Digital and Conventional Impression Techniques for Complete Dental Arch

2021 ◽  
Vol 11 (10) ◽  
pp. 4612
Author(s):  
KweonSoo Seo ◽  
Sunjai Kim
Keyword(s):  
Intraclass Correlation ◽  
Three Dimensional ◽  
New Method ◽  
Digital Impression ◽  
Dental Arch ◽  
Digital Models ◽  
Digital Impressions ◽  
Measuring Machine ◽  
Master Model ◽  
Conventional Impression

Purpose: The aim of this study was to present a new method to analyze the three-dimensional accuracy of complete-arch dental impressions and verify the reliability of the method. Additionally, the accuracies of conventional and intraoral digital impressions were compared using the new method. Methods: A master model was fabricated using 14 milled polyetheretherketone cylinders and a maxillary acrylic model. Each cylinder was positioned and named according to its corresponding tooth position. Twenty-five definitive stone casts were fabricated using conventional impressions of the master model. An intraoral scanner was used to scan the master model 25 times to fabricate 25 digital models. A coordinate measuring machine was used to physically probe each cylinder in the master model and definitive casts. An inspection software was used to probe cylinders of digital models. A three-dimensional part coordinate system was defined and used to compute the centroid coordinate of each cylinder. Intraclass correlation coefficient (ICC) was evaluated to examine the reliability of the new method. Independent two sample t-test was performed to compare the trueness and precision of conventional and intraoral digital impressions (α = 0.05). Results: ICC results showed that, the new method had almost perfect reliability for the measurements of the master model, conventional and digital impression. Conventional impression showed more accurate absolute trueness and precision than intraoral digital impression for most of the tooth positions (p < 0.05). Conclusions: The new method was reliable to analyze the three-dimensional deviation of complete-arch impressions. Conventional impression was still more accurate than digital intraoral impression for complete arches.

scholarly journals New Method for Generating New Families of Distributions

Symmetry ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 726
Author(s):  
Lamya A. Baharith ◽  
Wedad H. Aljuhani
Keyword(s):  
Exponential Distribution ◽  
Real Data ◽  
Rate Function ◽  
New Method ◽  
Likelihood Method ◽  
Alpha Power ◽  
Unknown Parameters ◽  
Failure Rate Function ◽  
New Approach ◽  
Numerical Studies

This article presents a new method for generating distributions. This method combines two techniques—the transformed—transformer and alpha power transformation approaches—allowing for tremendous flexibility in the resulting distributions. The new approach is applied to introduce the alpha power Weibull—exponential distribution. The density of this distribution can take asymmetric and near-symmetric shapes. Various asymmetric shapes, such as decreasing, increasing, L-shaped, near-symmetrical, and right-skewed shapes, are observed for the related failure rate function, making it more tractable for many modeling applications. Some significant mathematical features of the suggested distribution are determined. Estimates of the unknown parameters of the proposed distribution are obtained using the maximum likelihood method. Furthermore, some numerical studies were carried out, in order to evaluate the estimation performance. Three practical datasets are considered to analyze the usefulness and flexibility of the introduced distribution. The proposed alpha power Weibull–exponential distribution can outperform other well-known distributions, showing its great adaptability in the context of real data analysis.

scholarly journals Exploration of collagen cavitation based on peptide electrolysis

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Rui Zhai ◽  
Hui Chen ◽  
Zhihua Shan
Keyword(s):  
Structural Changes ◽  
Preparation Method ◽  
Supporting Electrolyte ◽  
Three Dimensional ◽  
Anode Region ◽  
New Approach ◽  
New Material ◽  
Animal Skin ◽  
Exchange Membrane ◽  
Material Preparation

AbstractElectrochemical modification of animal skin is a new material preparation method and new direction of research exploration. In this study, under the action of the electric field using NaCl as the supporting electrolyte, the effect of electrolysis on Glycyl-glycine(GlyGl), gelatin(Gel) and Three-dimensional rawhide collagen(3DC) were determined. The amino group of GlyGl is quickly eliminated within the anode region by electrolysis isolated by an anion exchange membrane. Using the same method, it was found that the molecular weight of Gel and the isoelectric point of the Gel decreased, and the viscosity and transparency of the Gel solution obviously changed. The electrolytic dissolution and structural changes of 3DC were further investigated. The results of TOC and TN showed that the organic matter in 3DC was dissolved by electrolysis, and the tissue cavitation was obvious. A new approach for the preparation of collagen-based multi-pore biomaterials by electrochemical method was explored.

A new method for volumetric measurement of the normal female cervix by three‐dimensional transvaginal ultrasound

2021 ◽  
Author(s):  
Matija Prka ◽  
Albert Despot ◽  
Alemka Brnčić Fischer ◽  
Herman Haller ◽  
Ana Tikvica Luetić ◽  
...  
Keyword(s):  
Transvaginal Ultrasound ◽  
Three Dimensional ◽  
New Method ◽  
Normal Female ◽  
Volumetric Measurement

scholarly journals Three-dimensional analysis of the root canal preparation with Reciproc Blue®, WaveOne Gold® and XP EndoShaper®: a new method in vivo

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Javier Caviedes-Bucheli ◽  
Nestor Rios-Osorio ◽  
Diana Usme ◽  
Cristian Jimenez ◽  
Adriana Pinzon ◽  
...  
Keyword(s):  
3D Reconstruction ◽  
Root Canal ◽  
Paired Comparison ◽  
Three Dimensional ◽  
New Method ◽  
Root Canal Preparation ◽  
Paired Data ◽  
Before And After ◽  
Student’S T

Abstract Background The purpose of this study was to evaluate the changes in canal volume after root canal preparation in vivo with 3 different single-file techniques (Reciproc-Blue®, WaveOne-Gold® and XP-EndoShaper®), with a new method using CBCT and 3D reconstruction. Methods In this prospective study, thirty human lower premolars from healthy patients were used, in which extraction was indicated for orthodontic reasons. All the teeth used were caries- and restoration-free with complete root development, without signs of periodontal disease or traumatic occlusion, and with only one straight canal (up to 25º curvature). Teeth were randomly divided into three different groups: Reciproc-Blue, WaveOne-Gold and XP-EndoShaper. CBCT scans before root canal preparation were used to create a 3D reconstruction with RHINOCEROS 5.0 software to assess the initial canal volume, and then compared with 3D reconstructions after canal preparation to measure the increase in canal volume. Student’s t test for paired data were used to determine statistically significant differences between the before and after canal volumes. Anova test was used to determine statistically significant differences in the percentage of canal volume increase between the groups and Tukey's post-hoc test were used to paired comparison. Results Reciproc-Blue showed the higher increase in canal volume, followed by WaveOne-Gold and XP-EndoShaper (p = 0.003). XP-EndoShaper did not show a statistically significant increase in canal volume after root canal preparation (p = 0.06). Conclusion With this model, Reciproc-Blue showed higher increase in root canal volume, followed by WaveOne-Gold, while XP-EndoShaper did not significantly increase root canal volume during preparation.

Sign in / Sign up

Export Citation Format

Share Document