A Numerical Study on Wave Propagating Through In-Line Net Cages

Author(s):  
Yun-Peng Zhao ◽  
Chun-Wei Bi ◽  
Guo-Hai Dong ◽  
Xiao-Dong Bai ◽  
Tiao-Jian Xu

A three-dimensional numerical model is established to simulate the interaction between waves and net cages. The porous-media fluid model is introduced to model the net cage in waves. An oscillating-boundary method is used to generate waves at one end of a tank partially filled with water. The flow motion of an incompressible, viscous fluid is described by Navier-Stokes equations and the free surface is tracked by volume of fluid (VOF) method. Validation of the numerical model is conducted by comparing the numerical results with the corresponding physical-model measurements of a net-cage model. In order to visualize the wave field around in-line net cages, numerical results of both wave elevation and water-particle-velocity distribution on a vertical plane of a transient field are presented. Compared with the undisturbed wave field, the effects of the net cages on both the wave elevation and the water-particle-velocity distribution around the net cages are noticeable. The study will contribute to understanding of the damping effect of a large fish farm on wave propagation.

Author(s):  
M. Hasanat Zaman ◽  
Ayhan Akinturk

In the present research, a 3D dispersive numerical model has been developed and utilized to study the modification of the wave field in the presence of offshore structure. The Alternating Direction Implicit (ADI) algorithm has been employed for the solution of the governing equations. Relevant experiments are carried out in the Offshore Engineering Basin (OEB) of National Research Council (NRC) Canada. OEB is a 3D heavy duty 75m × 32m × 2.8m test facility equipped with modern data acquisition and tracking devices to record experimental data. Total 10 wave probes are deployed to measure the data at different locations in the Basin. Later the numerical results are compared with the experimental results. The comparisons of the numerical results show great agreement with the experimental results.


2021 ◽  
Vol 36 (3) ◽  
pp. 165-176
Author(s):  
Kirill Nikitin ◽  
Yuri Vassilevski ◽  
Ruslan Yanbarisov

Abstract This work presents a new approach to modelling of free surface non-Newtonian (viscoplastic or viscoelastic) fluid flows on dynamically adapted octree grids. The numerical model is based on the implicit formulation and the staggered location of governing variables. We verify our model by comparing simulations with experimental and numerical results known from the literature.


1996 ◽  
Vol 118 (1) ◽  
pp. 164-172 ◽  
Author(s):  
C. H. Amon ◽  
K. S. Schmaltz ◽  
R. Merz ◽  
F. B. Prinz

A molten metal droplet landing and bonding to a solid substrate is investigated with combined analytical, numerical, and experimental techniques. This research supports a novel, thermal spray shape deposition process, referred to as microcasting, capable of rapidly manufacturing near netshape, steel objects. Metallurgical bonding between the impacting droplet and the previous deposition layer improves the strength and material property continuity between the layers, producing high-quality metal objects. A thorough understanding of the interface heat transfer process is needed to optimize the microcast object properties by minimizing the impacting droplet temperature necessary for superficial substrate remelting, while controlling substrate and deposit material cooling rates, remelt depths, and residual thermal stresses. A mixed Lagrangian–Eulerian numerical model is developed to calculate substrate remelting and temperature histories for investigating the required deposition temperatures and the effect of operating conditions on remelting. Experimental and analytical approaches are used to determine initial conditions for the numerical simulations, to verify the numerical accuracy, and to identify the resultant microstructures. Numerical results indicate that droplet to substrate conduction is the dominant heat transfer mode during remelting and solidification. Furthermore, a highly time-dependent heat transfer coefficient at the droplet/substrate interface necessitates a combined numerical model of the droplet and substrate for accurate predictions of the substrate remelting. The remelting depth and cooling rate numerical results are also verified by optical metallography, and compare well with both the analytical solution for the initial deposition period and the temperature measurements during droplet solidification.


2018 ◽  
Vol 22 (8) ◽  
pp. 2768-2795 ◽  
Author(s):  
Meysam Khodaei ◽  
Mojtaba Haghighi-Yazdi ◽  
Majid Safarabadi

In this paper, a numerical model is developed to simulate the ballistic impact of a projectile on a sandwich panel with honeycomb core and composite skin. To this end, a suitable material model for the aluminum honeycomb core is used taking the strain-rate dependent properties into account. To validate the ballistic impact of the projectile on the honeycomb core, numerical results are compared with the experimental results available in literature and ballistic limit velocities are predicted with good accuracy. Moreover, to achieve composite skin material model, a VUMAT subroutine including damage initiation based on Hashin’s seven failure criteria and damage evolution based on MLT approach modulus degradation is used. To validate the composite material model VUMAT subroutine, the ballistic limit velocities of the projectile impact on the composite laminates are predicted similar to the numerical results presented by other researchers. Next, the numerical model of the sandwich panel ballistic impact at different velocities is compared with the available experimental results in literature, and energy absorption capacity of the sandwich panel is predicted accurately. In addition, the numerical model simulated the sandwich panel damage mechanisms in different stages similar to empirical observations. Also, the composite skin damages are investigated based on different criteria damage contours.


2014 ◽  
Vol 548-549 ◽  
pp. 1257-1264 ◽  
Author(s):  
Xiao Yong Suo

Taking ejection process of the ink droplets from ink-jet nozzle as the prototype, a similar numerical model of droplet ejection was established. The VOF method was applied to track the interface of droplet ejection process and it is shown that the numerical results simulated by the VOF method were accurate and reliable. Six kinds of liquid with different physical properties were chosen as the research object. The numerical results were analyzed and compared. Finally, the effect of the surface tension, viscosity and density on the droplet ejection process was discussed.


Author(s):  
Rioko Hirota ◽  
Takaaki Shigematsu ◽  
Kenji Katoh ◽  
Tatsuro Wakimoto ◽  
Shinya Yoshioka

With the increasing demand for renewable energy in the world, research contributing to the improvement of the technology level of wave power generation is essential. The authors have been developed a wave power generation system using port facilities in inner bays with high energy-consuming cities. In this study, the relationship between the rotational characteristics of a Savonius water turbine and the water particle velocity was quantitatively evaluated under the calm conditions of the inner bay, such as wave motion, flow, and coexistence of wave and current. According to the experimental results, it is found that the relationship between the rotational circumferential speed and the water particle velocity of the water turbine installed in a wave field tends to be different from that in a flow field and is evaluated by different equations. In addition, the relationship between circumferential velocity and the water particle velocity has also been formulated when installed in a wave-current coexistence field.Recorded Presentation from the vICCE (YouTube Link): https://youtu.be/KX0XBFuao48


1976 ◽  
Vol 1 (15) ◽  
pp. 25 ◽  
Author(s):  
Edward B. Thornton ◽  
James J. Galvin ◽  
Frank L. Bub ◽  
David P. Richardson

The sight and sound of breaking waves and surf is so familiar and enjoyable that we tend to forget how little we really understand about them. Why is it, that compared to other branches of wave studies our knowledge of breaking waves is so empirical and inexact? The reason must lie partly in the difficulty of finding a precise mathematical description of a fluid flow that is in general nonlinear and time-dependent. The fluid accelerations can no longer be assumed t o be small compared t o gravity, as in Stokes's theory for periodic waves and the theory of cnoidal waves in shallow water, nor is the particle velocity any longer small compared to the phase velocity. The aim of this paper is to bring together s ome recent contributions to the calculation both of steep symmetric waves and of time-dependent surface waves. These have a bearing on the behaviour of whitecaps in deep water and of surf in the breaker zone . Since spilling breakers in gently shoaling water closely resemble solitary waves, we begin with the description of solitary waves of limiting amplitude, then discuss steep waves of arbitrary height. The observed intermittency of whitecaps is discussed in terms of the energy maximum, as a function of wave steepness, In Sections 6 and 7 a simpler description of steady symmetric waves is proposed, using an asymptotic expression for the flow near the wave crest. Finally we describe a new numerical technique (MEL, or mixed Eulerian-Lagrangian) with which it has been found possible to follow the development of periodic waves past the point when overturning takes place. Measurement of waves, and vertical and horizontal water particle velocities were made of spilling, plunging and surging breakers at sandy beaches in the vicinity of Monterey, California. The measured breaking waves, derived characteristically from swell-type waves, can be described as highly nonlinear. Spectra and cross spectra were calculated between waves and velocities. Secondary waves were noted visually and by the strong harmonics in the spectra. The strength of the harmonics is related to the beach steepness, wave height and period. The phase difference between waves and horizontal velocities indicates the unstable crest of the wave leads the velocities on the average by 5-20 degrees. Phase measurements between wave gauges in a line perpendicular to the shore show breaking waves to be frequency nondispersive indicating phase-coupling of the various wave components. The coherence squared values between the sea surface elevation and the horizontal water particle velocity were high in all runs, ranging above 0.8 at the peak of the spectra. The high coherence suggests that most of the motion in the body of breaking waves is wave-induced and not turbulent.


Sign in / Sign up

Export Citation Format

Share Document