Flow Induced Fluttering and Autorotation of a Hinged Vertical Flat Plate

Author(s):  
Antonio Carlos Fernandes ◽  
Sina Mirzaei Sefat

This paper addresses the investigations on fluttering and autorotation motions which may occur in the interaction of uniform current and freely rotating plate about a fixed vertical axis. The autorotation is a name given to the case that the plate turns continuously about the vertical axis and the fluttering motion is the periodic or chaotic oscillations of the plate around the vertical axis. According to the dimensional analysis the motion in flow induced rotation motion is governed essentially by dimensionless moment of inertia, Reynolds number and initial conditions. Certain combinations define the stability boundaries between fluttering and autorotation. Hence, a bifurcation diagram was prepared by the experiments to classify different states observed the small fluttering, fluttering and autorotation based on different Reynolds number and dimensionless moment of inertia.

Author(s):  
R. P. Logue ◽  
J. S. B. Gajjar ◽  
A. I. Ruban

The instability of supersonic compression ramp flow is investigated. It is assumed that the Reynolds number is large and that the governing equations are the unsteady triple-deck equations. The mean flow is first calculated by solving the steady equations for various scaled ramp angles α , and the numerical results suggest that there is no singularity for increasing ramp angles. The stability of the flow is investigated using two approaches, first by solving the linearized unsteady equations and looking for global modes proportional to e λ t . In the second approach, the linearized unsteady equations are solved numerically with various initial conditions. Whereas no globally unsteady modes could be found for the range of ramp angles studied, the numerical simulations show the formation of wavepacket type disturbances which grow and convect and reach large amplitudes. However, the numerical results show large variations with grid size even on very fine grids.


Author(s):  
Ali Bakhshandeh Rostami ◽  
Antonio Carlos Fernandes

This paper is dedicated to the simulation of fluttering (oscillatory) and tumbling (rotational) phenomenon that may occur during the flow induced rotation in the water or air current. Fluttering is the oscillation of body about an axis and the tumbling, better called here as autorotation, is a name given to the case when the body turns continuously around the axis. This work describes the simulation of these phenomena by a nonlinear time domain code on freely rotating plate about a fixed vertical axis. The dimensional analysis proves that the rotational motion induced by flow is governed essentially by the dimensionless moment of inertia (I*) and Reynolds number. For Reynolds number less than 15000, plate experiences small amplitude fluttering motion that is independent of I*. It is shown that by increasing I* the fluttering bifurcates to autorotation, with a transition point that is approximately independent of Reynolds number and is such that I*=0.083.


2019 ◽  
Vol 14 (1) ◽  
pp. 52-58 ◽  
Author(s):  
A.D. Nizamova ◽  
V.N. Kireev ◽  
S.F. Urmancheev

The flow of a viscous model fluid in a flat channel with a non-uniform temperature field is considered. The problem of the stability of a thermoviscous fluid is solved on the basis of the derived generalized Orr-Sommerfeld equation by the spectral decomposition method in Chebyshev polynomials. The effect of taking into account the linear and exponential dependences of the fluid viscosity on temperature on the spectral characteristics of the hydrodynamic stability equation for an incompressible fluid in a flat channel with given different wall temperatures is investigated. Analytically obtained profiles of the flow rate of a thermovisible fluid. The spectral pictures of the eigenvalues of the generalized Orr-Sommerfeld equation are constructed. It is shown that the structure of the spectra largely depends on the properties of the liquid, which are determined by the viscosity functional dependence index. It has been established that for small values of the thermoviscosity parameter the spectrum compares the spectrum for isothermal fluid flow, however, as it increases, the number of eigenvalues and their density increase, that is, there are more points at which the problem has a nontrivial solution. The stability of the flow of a thermoviscous fluid depends on the presence of an eigenvalue with a positive imaginary part among the entire set of eigenvalues found with fixed Reynolds number and wavenumber parameters. It is shown that with a fixed Reynolds number and a wave number with an increase in the thermoviscosity parameter, the flow becomes unstable. The spectral characteristics determine the structure of the eigenfunctions and the critical parameters of the flow of a thermally viscous fluid. The eigenfunctions constructed in the subsequent works show the behavior of transverse-velocity perturbations, their possible growth or decay over time.


1985 ◽  
Vol 52 (3) ◽  
pp. 686-692 ◽  
Author(s):  
L. A. Month ◽  
R. H. Rand

This problem is a generalization of the classical problem of the stability of a spinning rigid body. We obtain the stability chart by using: (i) the computer algebra system MACSYMA in conjunction with a perturbation method, and (ii) numerical integration based on Floquet theory. We show that the form of the stability chart is different for each of the three cases in which the spin axis is the minimum, maximum, or middle principal moment of inertia axis. In particular, a rotation with arbitrarily small angular velocity about the maximum moment of inertia axis can be made unstable by appropriately choosing the model parameters. In contrast, a rotation about the minimum moment of inertia axis is always stable for a sufficiently small angular velocity. The MACSYMA program, which we used to obtain the transition curves, is included in the Appendix.


1998 ◽  
Vol 358 ◽  
pp. 357-378 ◽  
Author(s):  
M. NAGATA

The stability of nonlinear tertiary solutions in rotating plane Couette flow is examined numerically. It is found that the tertiary flows, which bifurcate from two-dimensional streamwise vortex flows, are stable within a certain range of the rotation rate when the Reynolds number is relatively small. The stability boundary is determined by perturbations which are subharmonic in the streamwise direction. As the Reynolds number is increased, the rotation range for the stable tertiary motions is destroyed gradually by oscillatory instabilities. We expect that the tertiary flow is overtaken by time-dependent motions for large Reynolds numbers. The results are compared with the recent experimental observation by Tillmark & Alfredsson (1996).


1992 ◽  
Vol 02 (01) ◽  
pp. 1-9 ◽  
Author(s):  
YOHANNES KETEMA

This paper is concerned with analyzing Melnikov’s method in terms of the flow generated by a vector field in contrast to the approach based on the Poincare map and giving a physical interpretation of the method. It is shown that the direct implication of a transverse crossing between the stable and unstable manifolds to a saddle point of the Poincare map is the existence of two distinct preserved homoclinic orbits of the continuous time system. The stability of these orbits and their role in the phenomenon of sensitive dependence on initial conditions is discussed and a physical example is given.


2008 ◽  
Vol 603 ◽  
pp. 63-100 ◽  
Author(s):  
G. SUBRAMANIAN ◽  
DONALD L. KOCH

A theoretical framework is developed to describe, in the limit of small but finite Re, the evolution of dilute clusters of sedimenting particles. Here, Re =aU/ν is the particle Reynolds number, where a is the radius of the spherical particle, U its settling velocity, and ν the kinematic viscosity of the suspending fluid. The theory assumes the disturbance velocity field at sufficiently large distances from a sedimenting particle, even at small Re, to possess the familiar source--sink character; that is, the momentum defect brought in via a narrow wake behind the particle is convected radially outwards in the remaining directions. It is then argued that for spherical clusters with sufficiently many particles, specifically with N much greater than O(R0U/ν), the initial evolution is strongly influenced by wake-mediated interactions; here, N is the total number of particles, and R0 is the initial cluster radius. As a result, the cluster first evolves into a nearly planar configuration with an asymptotically small aspect ratio of O(R0U/N ν), the plane of the cluster being perpendicular to the direction of gravity; subsequent expansion occurs with an unchanged aspect ratio. For relatively sparse clusters with N smaller than O(R0U/ν), the probability of wake interactions remains negligible, and the cluster expands while retaining its spherical shape. The long-time expansion in the former case, and that for all times in the latter case, is driven by disturbance velocity fields produced by the particles outside their wakes. The resulting interactions between particles are therefore mutually repulsive with forces that obey an inverse-square law. The analysis presented describes cluster evolution in this regime. A continuum representation is adopted with the clusters being characterized by a number density field (n(r, t)), and a corresponding induced velocity field (u (r, t)) arising on account of interactions. For both planar axisymmetric clusters and spherical clusters with radial symmetry, the evolution equation admits a similarity solution; either cluster expands self-similarly for long times. The number density profiles at different times are functions of a similarity variable η = (r/t1/3), r being the radial distance away from the cluster centre, and t the time. The radius of the expanding cluster is found to be of the form Rcl (t) = A (ν a)1/3N1/3t1/3, where the constant of proportionality, A, is determined from an analytical solution of the evolution equation; one finds A = 1.743 and 1.651 for planar and spherical clusters, respectively. The number density profile in a planar axisymmetric cluster is also obtained numerically as a solution of the initial value problem for a canonical (Gaussian) initial condition. The numerical results compare well with theoretical predictions, and demonstrate the asymptotic stability of the similarity solution in two dimensions for long times, at least for axisymmetric initial conditions.


2021 ◽  
Vol 932 ◽  
Author(s):  
Pierre Ricco ◽  
Claudia Alvarenga

The development and growth of unsteady three-dimensional vortical disturbances entrained in the entry region of a circular pipe is investigated by asymptotic and numerical methods for Reynolds numbers between $1000$ and $10\,000$ , based on the pipe radius and the bulk velocity. Near the pipe mouth, composite asymptotic solutions describe the dynamics of the oncoming disturbances, revealing how these disturbances are altered by the viscous layer attached to the pipe wall. The perturbation velocity profiles near the pipe mouth are employed as rigorous initial conditions for the boundary-region equations, which describe the flow in the limit of low frequency and large Reynolds number. The disturbance flow is initially primarily present within the base-flow boundary layer in the form of streamwise-elongated vortical structures, i.e. the streamwise velocity component displays an intense algebraic growth, while the cross-flow velocity components decay. Farther downstream the disturbance flow occupies the whole pipe, although the base flow is mostly inviscid in the core. The transient growth and subsequent viscous decay are confined in the entrance region, i.e. where the base flow has not reached the fully developed Poiseuille profile. Increasing the Reynolds number and decreasing the frequency causes more intense perturbations, whereas small azimuthal wavelengths and radial characteristic length scales intensify the viscous dissipation of the disturbance. The azimuthal wavelength that causes the maximum growth is found. The velocity profiles are compared successfully with available experimental data and the theoretical results are helpful to interpret the only direct numerical dataset of a disturbed pipe-entry flow.


1999 ◽  
Author(s):  
O. Burak Ozdoganlar ◽  
William J. Endres

Abstract This paper presents a mathematical perspective, to complement the intuitive or practice-oriented perspective, to classifying machining operations as parallel-process (simultaneous) or single-process in nature. Illustrative scenarios are provided to demonstrate how these two perspectives may lead in different situations to the same or different conclusions regarding process parallelism. A model representation of a general parallel-process machining system is presented, based on which the general parallel-process stability eigenvalue problem is formulated. For a special simplified case of the general system, analytical methods are employed to derive a fully analytical stability solution. Thorough study of this solution through eigenvector analysis sheds light on some fundamental phenomena of parallel-process machining stability, such as dependence of the stability solution on phasing of the initial conditions (disturbances). This establishes the importance, when employing numerical time-domain simulation for such analyses, of specifying initial conditions for the multiple processes to be arbitrarily phased so that correct results are achieved across all spindle speeds.


Sign in / Sign up

Export Citation Format

Share Document