A Novel Structural Joint With the Potential of Fire-Tolerance Improvement

2005 ◽  
Author(s):  
S. V. Khonsari ◽  
G. L. England ◽  
A. R. Jamshidi-Vismeh ◽  
N. Fattahian
Keyword(s):  
Oil And Gas ◽  
Elevated Temperatures ◽  
Oil And Gas Industry ◽  
High Energy ◽  
Protection Measures ◽  
Gas Industry ◽  
Thermal Insulating ◽  
Structural Joint ◽  
Materials Used ◽  
High Energy Dissipation

A new innovative ‘universal’ structural joint with multiple applications was devised. The two major conceived contexts for the use of this joint are ‘joining beams to columns,’ and ‘joining diagonal braces to horizontal ones.’ The main features of this joint are its high rotational capacity, its high shear deformation capacity, its high energy-dissipation capacity, its ability to contain damage, and its repalceability. Due to its geometry, it can well lend itself to protection measures against fire, normally practiced by the involving industries. This makes it a good candidate for being used in structures related to oil and gas industry, offshore or onshore. Through numerical modelling of the joint, also using mechanical properties of ‘mild steel,’ one of the best potential materials for the fabrication of the joint, at elevated temperatures, the ‘bending behaviour’ of the joint at various temperatures was studied. Additionally, the effects of using various thermal insulating materials, used for covering the joint, in reducing the temperature of various parts of the joint were investigated. Though not supported by any experiments, all these numerical analyses showed the potential of this joint for presenting improved behaviour during a fire scenario, as a result of using some insulating agents.

Nanoemulsions: A Versatile Technology for Oil and Gas Applications

2021 ◽  
Author(s):  
Nouf AlJabri ◽  
Nan Shi
Keyword(s):  
Droplet Size ◽  
Large Scale ◽  
Oil And Gas ◽  
Volume Fraction ◽  
Oil Industry ◽  
Oil And Gas Industry ◽  
High Energy ◽  
Small Droplet ◽  
Gas Industry ◽  
Wide Range

Abstract Nanoemulsions (NEs) are kinetically stable emulsions with droplet size on the order of 100 nm. Many unique properties of NEs, such as stability and rheology, have attracted considerable attention in the oil industry. Here, we review applications and studies of NEs for major upstream operations, highlighting useful properties of NEs, synthesis to render these properties, and techniques to characterize them. We identify specific challenges associated with large-scale applications of NEs and directions for future studies. We first summarize useful and unique properties of NEs, mostly arising from the small droplet size. Then, we compare different methods to prepare NEs based on the magnitude of input energy, i.e., low-energy and high-energy methods. In addition, we review techniques to characterize properties of NEs, such as droplet size, volume fraction of the dispersed phase, and viscosity. Furthermore, we discuss specific applications of NEs in four areas of upstream operations, i.e., enhanced oil recovery, drilling/completion, flow assurance, and stimulation. Finally, we identify challenges to economically tailor NEs with desired properties for large-scale upstream applications and propose possible solutions to some of these challenges. NEs are kinetically stable due to their small droplet size (submicron to 100 nm). Within this size range, the rate of major destabilizing mechanisms, such as coalescence, flocculation, and Ostwald ripening, is considerably slowed down. In addition, small droplet size yields large surface-to-volume ratio, optical transparency, high diffusivity, and controllable rheology. Similar to applications in other fields (food industry, pharmaceuticals, cosmetics, etc.), the oil and gas industry can also benefit from these useful properties of NEs. Proposed functions of NEs include delivering chemicals, conditioning wellbore/reservoir conditions, and improve chemical compatibility. Therefore, we envision NEs as a versatile technology that can be applied in a variety of upstream operations. Upstream operations often target a wide range of physical and chemical conditions and are operated at different time scales. More importantly, these operations typically consume a large amount of materials. These facts not only suggest efforts to rationally engineer properties of NEs in upstream applications, but also manifest the importance to economically optimize such efforts for large-scale operations. We summarize studies and applications of NEs in upstream operations in the oil and gas industry. We review useful properties of NEs that benefit upstream applications as well as techniques to synthesize and characterize NEs. More importantly, we identify challenges and opportunities in engineering NEs for large-scale operations in different upstream applications. This work not only focuses on scientific aspects of synthesizing NEs with desired properties but also emphasizes engineering and economic consideration that is important in the oil industry.

“Has Microelectronic MCM Technology Matured and is it Capable of Servicing the Widespread Needs of Down Well 225°C Operating Applications in the Oil and Gas Industry?”

2014 ◽  
Vol 2014 (HITEC) ◽  
pp. 000319-000324
Author(s):  
Bob Hunt ◽  
Andy Tooke
Keyword(s):  
Thermal Shock ◽  
Thick Film ◽  
Oil And Gas ◽  
Elevated Temperatures ◽  
Operating Temperature ◽  
Oil And Gas Industry ◽  
Temperature Cycling ◽  
Active Components ◽  
Gas Industry

This paper reviews development and qualification work performed on 225°C operating temperature modules based on ceramic thick film multi-layer substrates supporting embedded thick film resistors, assembled passive and active components with ‘chip and wire’ connections and sealing in hermetic metal and ceramic cavity packages. It considers aspects of development and importantly investigates product qualification which includes shock and vibration at elevated temperatures as well as thermal shock and temperature cycling. In conclusion there is an attempt to answer the question “Has microelectronic MCM technology matured and is it capable of servicing the widespread needs of down well 225 °C operating applications in the Oil and Gas industry?”

scholarly journals The Role of Façade Materials in Blast-Resistant Buildings: An Evaluation Based on Fuzzy Delphi and Fuzzy EDAS

Algorithms ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 119 ◽  
Author(s):  
Hamidreza Hasheminasab ◽  
Sarfaraz Hashemkhani Zolfani ◽  
Mahdi Bitarafan ◽  
Prasenjit Chatterjee ◽  
Alireza Abhaji Ezabadi
Keyword(s):  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Hazard Identification ◽  
Fuzzy Evaluation ◽  
Gas Industry ◽  
Building Facade ◽  
Fuzzy Delphi ◽  
Building Facades ◽  
Materials Used ◽  
Air Explosion

Blast-resistant buildings are mainly used to protect main instruments, controllers, expensive equipment, and people from explosion waves. Oil and gas industry projects almost always include blast-resistant buildings. For instance, based on a hazard identification (HAZID) and hazard and operability (HAZOP) analysis of a plant, control rooms and substations are sometimes designed to withstand an external free air explosion that generates blast over pressure. In this regard, a building façade is considered to be the first barrier of resistance against explosion waves, and therefore a building façade has an important role in reducing a building’s vulnerability and human casualties. In case of a lack of enough resistance, explosion waves enter a building and bring about irreparable damage to the building. Consequently, it seems important to study and evaluate various materials used in a façade against the consequences of an explosion. This study tried to make a comparison between different types of building facades against explosion waves. The materials used in a building play a key role in the vulnerability of a building. In this research, a literature review and the fuzzy Delphi method were applied to find the most critical criteria, and then a fuzzy evaluation based on the distance from the average solution (EDAS) was applied in order to assess various materials used in building facades from the perspective of resiliency. A questionnaire was presented to measure effective indices in order to receive experts’ ideas. Finally, by implementing this methodology in a case study, it was concluded that a stone façade performs much better against explosions.

scholarly journals THE INFLUENCE OF ETHYLENE COPOLYMERS WITH VINYL ACETATE ON PROPERTIES OF RUBBER BASED OF BUTADIENE-NITRILE CAOUTCHOUC

2018 ◽  
Vol 61 (8) ◽  
pp. 59
Author(s):  
Ivan S. Spiridonov ◽  
Marina S. Illarionova ◽  
Nikolay F. Ushmarin ◽  
Sergei I. Sandalov ◽  
Nikolay I. Kol'tsov
Keyword(s):  
Vinyl Acetate ◽  
Oil And Gas ◽  
Elevated Temperatures ◽  
Physical And Mechanical Properties ◽  
Oil And Gas Industry ◽  
Petroleum Products ◽  
Standard Samples ◽  
Rubber Mixture ◽  
Gas Industry ◽  
Technical Products

Rubber-technical products, which are used in the oil and gas industry, must have high thermal and aggressive strength. Rubbers based on butadiene-nitrile caoutchoucs are usually used for these purposes, since they have good operational properties. However, under the influence of elevated temperatures, the resistance of such rubbers to the action of petroleum products is reduced, as a result of which the physico-mechanical characteristics decrease. To improve the operational properties of rubber-technical products, various technological additives are introduced into the rubber mixtures. Such additives can be copolymers of ethylene with vinyl acetate(EVA), which increase the resistance of rubbers to action of high temperatures and aggressive media. This is due to the fact that these copolymers are well combined with butadiene-nitrile caoutchoucs, forming coordination bonds with rubber molecules, which contributes thereby increasing in the elastic-strength and performance properties of rubber. In this connection, the influence of EVA (sevillenes 11104-030, 11808-340 and MarPol 1802), differing in the content of vinyl acetate units, on the rheometric, physico-mechanical and operational properties of the rubber mixture based on butadiene-nitrile rubber in this paper was investigated. The study was carried out to improve the thermo-resistance of rubber used for the manufacture of oil and petrol resistant rubber-technical products for the oil and gas industry. The rubber mixture was prepared on laboratory rolls and standard samples were vulcanized in an electrically heated press. The study of rheometric properties has shown that EVA affect the characteristics of the vulcanization process of a rubber mixture. For vulcanizates, the influence of the content of EVA in a rubber mixture on the physical and mechanical properties was studied: the conditional tensile strength, elongation at break, tear resistance, rebound elasticity, Shore A hardness, relative compression deformation. The effect of the standard liquid ZHR-1 on the change in these properties, as well as the degree of swelling of the vulcanizates after their daily soaking in the standard liquid SZHR-1 and a mixture of isooctane + toluene, was studied. It has been established that vulcanizate of a rubber mixture containing sevilene 11808-340 is characterized by the best physico-mechanical and operational properties.

Mechanical Properties of API Class C Cement Contaminated with Oil-Based Mud OBM at Elevated Temperatures and Early Curing Time

2021 ◽  
Author(s):  
Nachiket Arbad ◽  
Fernando Rincon ◽  
Catalin Teodoriu ◽  
Mahmood Amani
Keyword(s):  
Mechanical Properties ◽  
Oil And Gas ◽  
Elevated Temperatures ◽  
Critical Role ◽  
Oil And Gas Industry ◽  
Experimental Investigations ◽  
Curing Time ◽  
Gas Industry ◽  
Ambient Room Temperature ◽  
Class C

Abstract The catastrophic events faced by the Oil and Gas industry in the past depict the importance of maintaining the integrity of the well. The cement acts as a crucial barrier throughout the life cycle of the well. The contamination of the cement occurs due to inefficiency in cementing practices and operations. Experimental investigations have been done on the reduction in mechanical properties of different API class cement considering contamination with water-based mud and oil-based mud. This study focuses on analyzing the changes in mechanical properties of API Class C cement on varying the following parameters: OBM contamination (0%, 0.6%, 1.1%, 2.2%, 4.3%) Curing time (4 hrs, 6 hrs, 8 hrs, 1 day, 3 days, 7 days) Temperature (25˚C, 75 ˚C) API recommendations were followed for preparing the cement slurries. The destructive, as well as non-destructive tests were carried out on the cement samples at ambient room temperature to measure the uniaxial compressive strength (UCS) for OBM contaminated class C cement slurries. The general trend observed is that the UCS increases with an increase in curing time and temperature. UCS decreases with an increase in OBM contamination. Logarithmic trends were obtained for UCS vs curing time for different contaminations at a given temperature. Exceptions were observed at lower curing times where contaminated samples showed better results than the neat cement slurries. These observations play a critical role in understanding contaminated cement behavior. This widespread work was carried out only on API Class C cement to provide reliable data for future references. The correlations presented in this paper will help operators estimate the deterioration in mechanical properties of Class C cement in the presence of low OBM contamination. Email: [email protected] & [email protected]

scholarly journals On the Influence of the Microstructure upon the Fatigue and Corrosion Fatigue Behavior of UNS N07718

Metals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 117
Author(s):  
Christopher Tom Engler ◽  
Helmuth Sarmiento Klapper ◽  
Matthias Oechsner
Keyword(s):  
Corrosion Fatigue ◽  
Oil And Gas ◽  
Fatigue Behavior ◽  
Oil And Gas Industry ◽  
Industrial Applications ◽  
Alloy 718 ◽  
Gas Industry ◽  
Operational Conditions ◽  
Δ Phase ◽  
Materials Used

Due to the challenging operational conditions occurring during drilling, e.g., in the oil and gas industry, the corrosion fatigue (CF) behavior of materials used in drillstring components needs to be well understood. The combination of cyclic mechanic loads and a corrosive environment can affect significantly the integrity of a material, which has to be taken into account when selecting and qualifying materials for drilling equipment. Nickel alloys such as the precipitation-hardenable alloy 718 (UNS N07718) are widely used in many industrial applications including subterranean drilling. In the present study, the fatigue and CF behavior of alloy 718 in three different metallurgical conditions was investigated. The CF behavior of the different conditions was determined using customized rotating bending machines enabling testing in a simulated drilling environment at 125 °C. Results have shown that the fatigue and CF strength of alloy 718 is affected by its microstructural particularities, for instance, the amount of strengthening phases and δ-phase.

scholarly journals Cavitation Erosion of P110 Steel in Different Drilling Muds

2016 ◽  
Vol 16 (2) ◽  
pp. 57-67
Author(s):  
M. Kmieć ◽  
B. Karpiński ◽  
M. Szkodo
Keyword(s):  
Cavitation Erosion ◽  
Oil And Gas ◽  
Drilling Fluid ◽  
Test Procedure ◽  
Oil And Gas Industry ◽  
Gas Industry ◽  
P110 Steel ◽  
Materials Used ◽  
Drilling Muds ◽  
Ultrasonic Cavitation Erosion

Abstract The P110 steel specimens were subjected to ultrasonic cavitation erosion in different compositions of drilling muds and surfactant additive. The test procedure was based on ASTM-G-32 standard recommendations. API 5CT-P110 steel is used for pipes in oil and gas industry. The harsh environment and high velocity of flows poses corrosive and erosive threat on materials used there. The composition of drilling fluid influences its rheological properties and thus intensity of cavitation erosion. The erosion curves based on weight loss were measured.

Prediction of Gas Permeation in Polymeric Materials Used in Oil and Gas Industry

2018 ◽  
Author(s):  
Nooshin Nassr ◽  
Zahed Siddique
Keyword(s):  
Experimental Data ◽  
Oil And Gas ◽  
Polymeric Materials ◽  
Oil And Gas Industry ◽  
Gas Permeation ◽  
Permeation Rate ◽  
Gas Industry ◽  
High Temperature And Pressure ◽  
Temperature And Pressure ◽  
Materials Used

An Arrhenius relationship is employed to develop a model for prediction of gas permeation in the polymeric materials. A permeation cell was designed to measure the gas permeation. The permeation of Helium was examined over a range of low to high temperature and pressure conditions. The results of the experiments were used to verify the accuracy of the prediction model. The obtained model was successful in predicting gas permeation rate at two different pressures. The results showed that pressure’s effect is insignificant on models. The predicted results for different pressure were close, and both models can be used to obtain an approximation for gas permeation rate for the examined material where no experimental data exists.

High Temperature Protection against Unwanted Species within Hermetic Packaging

2015 ◽  
Vol 2015 (HiTEN) ◽  
pp. 000116-000122
Author(s):  
Jennifer Williams ◽  
Johnson Matthey
Keyword(s):  
Carbon Dioxide ◽  
High Temperature ◽  
Organic Contaminants ◽  
Oil And Gas ◽  
Elevated Temperatures ◽  
New Technology ◽  
Oil And Gas Industry ◽  
Gas Industry ◽  
Oxide Component ◽  
Carbon Dioxide Addition

The need for electronic applications to be able to withstand high temperatures has become more prevalent in recent years. With drilling in the oil and gas industry getting deeper, the operating temperatures are getting higher, with typical geothermal gradients of 25 °C/km. Temperatures up to 250 °C are often seen by drilling operations, which is putting a greater strain on the electronics and associated packaging. Standard methods of cooling are not viable for these harsh environments, so new technology is required to negate the effects of the extreme temperatures. As well as the use of high temperature stable electronic components, High Temperature Getters are required to remove gaseous contaminants from electronic housings to negate the associated deleterious effect on performance. The contaminating species to be removed are commonly H2O, CO2, and H2, and sometimes short chain organic molecules. Conventional getter materials can remove damaging species at temperatures up to about 80 °C. New technology is however required to eliminate these species at temperatures up to 250 °C, where existing getter formulations would certainly fail. Johnson Matthey has developed a range of getters that can remove multiple contaminants at both ambient and elevated temperatures. The first product in the series, HTA 1 can remove water and carbon dioxide. Addition of a metal oxide component in HTA 2 facilitates hydrogen removal at elevated temperatures, with capacities in excess of 70 cm3/g achieved. HTA 3 can adsorb unwanted organic contaminants in addition to removing water and carbon dioxide. HTA 4 is a combined getter capable of eliminating all of the aforementioned contaminant species. These products, combined with the unique, precision engineered Hi-Rel encapsulation (Figure 1) allow getters to be supplied pre-activated, without the end user needing to apply a thermal treatment prior to use. The product can be fitted into any hermetic device to extend the lifetime, thus decreasing the number of failures within electronic assemblies, improving system reliability and preventing operations being shut down as frequently.

scholarly journals Analysis of the main causes of technological oil losses and features of the innovation management process in the oil and gas industry

2021 ◽  
Vol 12 (3) ◽  
pp. 54-60
Author(s):  
Marine M. Manukyan
Keyword(s):  
Oil And Gas ◽  
New Technologies ◽  
Main Idea ◽  
Oil And Gas Industry ◽  
High Energy ◽  
Innovation Activity ◽  
Gas Industry ◽  
Slow Development ◽  
Wide Range

The article considers the main reasons for the occurrence of technological losses of oil, as well as the state of innovation activity in the oil and gas complex of Russia and abroad. The main idea of modern trends in the oil industry, today, has become energy saving. The preparation and processing of associated petroleum gas is directly related to high energy intensity indicators, since these processes are carried out by creating and maintaining a continuous technology. The interest of manufacturers in reducing the costs (resource and financial) for production without compromising the quality of products leads to innovative growth. The goal is to reduce electricity consumption, so one of the main ideas of the developments is to create new technologies that are aimed at rational use of energy. The largest energy costs are spent on: gas compression, its movement around the production facility, creating positive and negative temperature values in a wide range, as well as maintaining the operation of the equipment at the created temperature regime. In the period of economic globalization, the task of effective development of oil and gas complex is more urgent than ever. An important role in the modern economy is played by the innovative activity of oil and gas processing enterprises, which contributes to improving the quality of services and goods. Lack of resources, depreciation of technical funds, old wells, as well as the slow development of new oil and gas fields leads to a slow development of industry, which necessitates the introduction and active use of innovative technologies. The article also presents methods for evaluating the commercial efficiency of investments, highlights the main principles for evaluating the effectiveness of an investment project in the oil and gas industry.

Sign in / Sign up

Export Citation Format

Share Document