Seakeeping Tests With Gaussian Wave Packets

2005 ◽  
Author(s):  
Vini´cius Matos ◽  
Joel Sena Sales ◽  
S. H. Sphaier
Keyword(s):  
Transfer Function ◽  
The Body ◽  
Irregular Waves ◽  
Design Stage ◽  
Body Movements ◽  
Transient Waves ◽  
Hydrodynamic Behavior ◽  
Transient Wave ◽  
Accurate Evaluation ◽  
Floating Systems

An important property used in the design stage of floating systems is the RAO (Response Amplitude Operator), the transfer function, for motions, forces and so on. This importance has motivated the development of several analytical, numerical and experimental tools to obtain the hydrodynamic behavior of platforms and ships. Experimental model tests in wave tanks are advisable for the accurate evaluation of the body movements. Three known techniques are used to obtain the RAO curves: tests with regular, irregular and transient waves. In the present work, special attention is given to the technique used to perform model testing with one type of transient wave: the Gaussian Wave Packet. The advantages of using such technique are discussed and results are also presented for a semi-submersible model during tests carried out at Laborato´rio de Tecnologia Oceaˆnica - LabOceano/COPPE/UFRJ, Brazil. Numerical calculations and tests with regular and irregular waves are used for validation and comparison.

Transient Wave Packets: New Application in CFD-Methods

2014 ◽  
Author(s):  
Günther F. Clauss ◽  
Sven Stuppe ◽  
Matthias Dudek
Keyword(s):  
Potential Theory ◽  
Wave Packets ◽  
Model Tests ◽  
Irregular Waves ◽  
Design Stage ◽  
Detailed Knowledge ◽  
Offshore Structure ◽  
Transient Wave ◽  
Space And Time ◽  
Hull Structure

Detailed knowledge of motion and seakeeping behaviour in an early design stage is indispensable in modern layout of marine offshore structures. Therefore, numerical methods are used to calculate the Response Amplitude Operators (RAO), which are generally based on potential theory or the Reynolds-Averaged-Navier-Stokes-Equation (RANSE). Calculations with potential-codes are commonly used, well established and time-saving. Main disadvantages are the neglect of viscous effects and the hull structure above the still water level. By using RANSE-methods, these nonlinear effects can be investigated in detail, but at the price of calculation time and extensive grid generation. To achieve sufficient RAOs in frequency domain, time-consuming and intensive calculations would be necessary with these CFD-methods, using seastate applications with regular or irregular waves only. Therefore, these methods are not convenient for standard motion analysis by now. Transient Wave Packets (TWP) represent an approved method at model tests, revealing the entire RAO for any offshore structure within one single, short test run. Main advantage of this technique is the accurate predictability and short superposition in space and time. Containing all elementary wavelengths of the generated initial wave spectra, the TWP-method could be used in RANSE-methods, implementing all necessary initial conditions to the CFD-solver. To reduce the calculation effort to a minimum in space and time, the superimposed wave train is generated near the investigated offshore structure by using modified, linear wave theory in spatial domain. To present this method by means of a practical example, the motion and sloshing behaviour of an offshore LNG-carrier (LNGC) are investigated in detail. For validation purpose, all results are compared to model tests, conducted in the seakeeping basin at Technische Universität Berlin (TUB), as well as numerical results of the potential theory solver WAMIT.

scholarly journals Enhanced Performance and Diffusion Robustness of Phase-Change Metasurfaces via a Hybrid Dielectric/Plasmonic Approach

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 525
Author(s):  
Joe Shields ◽  
Carlota Ruiz de Galarreta ◽  
Jacopo Bertolotti ◽  
C. David Wright
Keyword(s):  
Melting Point ◽  
Phase Change ◽  
Noble Metals ◽  
Phase Change Materials ◽  
High Efficiency ◽  
The Body ◽  
Design Stage ◽  
High Melting ◽  
Optical Performance ◽  
Electrical Conductors

Materials of which the refractive indices can be thermally tuned or switched, such as in chalcogenide phase-change alloys, offer a promising path towards the development of active optical metasurfaces for the control of the amplitude, phase, and polarization of light. However, for phase-change metasurfaces to be able to provide viable technology for active light control, in situ electrical switching via resistive heaters integral to or embedded in the metasurface itself is highly desirable. In this context, good electrical conductors (metals) with high melting points (i.e., significantly above the melting point of commonly used phase-change alloys) are required. In addition, such metals should ideally have low plasmonic losses, so as to not degrade metasurface optical performance. This essentially limits the choice to a few noble metals, namely, gold and silver, but these tend to diffuse quite readily into phase-change materials (particularly the archetypal Ge2Sb2Te5 alloy used here), and into dielectric resonators such as Si or Ge. In this work, we introduce a novel hybrid dielectric/plasmonic metasurface architecture, where we incorporated a thin Ge2Sb2Te5 layer into the body of a cubic silicon nanoresonator lying on metallic planes that simultaneously acted as high-efficiency reflectors and resistive heaters. Through systematic studies based on changing the configuration of the bottom metal plane between high-melting-point diffusive and low-melting-point nondiffusive metals (Au and Al, respectively), we explicitly show how thermally activated diffusion can catastrophically and irreversibly degrade the optical performance of chalcogenide phase-change metasurface devices, and how such degradation can be successfully overcome at the design stage via the incorporation of ultrathin Si3N4 barrier layers between the gold plane and the hybrid Si/Ge2Sb2Te5 resonators. Our work clarifies the importance of diffusion of noble metals in thermally tunable metasurfaces and how to overcome it, thus helping phase-change-based metasurface technology move a step closer towards the realization of real-world applications.

Developmental stages in the Digenea

Parasitology ◽  
1964 ◽  
Vol 54 (2) ◽  
pp. 295-312 ◽  
Author(s):  
Elon E. Byrd ◽  
William P. Maples
Keyword(s):  
Body Wall ◽  
Developmental Stages ◽  
Snail Host ◽  
The Body ◽  
Body Movements ◽  
Hatching Enzyme ◽  
Apical Papilla ◽  
Short Time ◽  
Membranous Body ◽  
Egg Capsule

The naturally oviposited egg of Dasymetra conferta is fully embryonated and it hatches only after it is ingested by the snail host, Physa spp.Hatching appears to be in response to some stimulus supplied by the living snail. The stimulus causes the larva to exercise a characteristic series of body movements and to liberate a granular sustance (hatching enzyme) from the larger pair of its cephalic glands. This enzyme reacts with the vitelline fluid to create pressure within the egg capsule, and with the cementum of the operculum, so that it may be lifted away. The larva's escape from the shell, therefore, is due to a combination of pressure and body movements.The hatched larva has a membranous body wall, supporting six epidermal plates, an apical papilla, two penetration glands and a central matrix (the presumptive brood mass).It lives for about an hour within the snail and during this time there is a reorganization of the central matrix which terminates in the formation of an 8-nucleated syncytial brood mass.The miracidial ‘case’, consisting of the body wall and the epidermal plates, ultimately ruptures to liberate the brood mass. Once the brood mass is free it penetrates through the gut wall in an incredibly short time.

Muscle strain histories in swimming milkfish in steady and sprinting gaits

1999 ◽  
Vol 202 (5) ◽  
pp. 529-541 ◽  
Author(s):  
S.L. Katz ◽  
R.E. Shadwick ◽  
H.S. Rapoport
Keyword(s):  
White Muscle ◽  
Beat Frequency ◽  
The Body ◽  
Body Volume ◽  
Implicit Assumption ◽  
Muscle Strain ◽  
Body Movements ◽  
Wide Range ◽  
Speed Range ◽  
Local Body

Adult milkfish (Chanos chanos) swam in a water-tunnel flume over a wide range of speeds. Fish were instrumented with sonomicrometers to measure shortening of red and white myotomal muscle. Muscle strain was also calculated from simultaneous overhead views of the swimming fish. This allowed us to test the hypothesis that the muscle shortens in phase with local body bending. The fish swam at slow speeds [U<2.6 fork lengths s-1 (=FL s-1)] where only peripheral red muscle was powering body movements, and also at higher speeds (2. 6>U>4.6 FL s-1) where they adopted a sprinting gait in which the white muscle is believed to power the body movements. For all combinations of speeds and body locations where we had simultaneous measurements of muscle strain and body bending (0.5 and 0.7FL), both techniques were equivalent predictors of muscle strain histories. Cross-correlation coefficients for comparisons between these techniques exceeded 0.95 in all cases and had temporal separations of less than 7 ms on average. Muscle strain measured using sonomicrometry within the speed range 0.9-2.6 FL s-1 showed that muscle strain did not increase substantially over that speed range, while tail-beat frequency increased by 140 %. While using a sprinting gait, muscle strains became bimodal, with strains within bursts being approximately double those between bursts. Muscle strain calculated from local body bending for a range of locations on the body indicated that muscle strain increases rostrally to caudally, but only by less than 4 %. These results suggest that swimming muscle, which forms a large fraction of the body volume in a fish, undergoes a history of strain that is similar to that expected for a homogeneous, continuous beam. This has been an implicit assumption for many studies of muscle function in many fish, but has not been tested explicitly until now. This result is achieved in spite of the presence of complex and inhomogeneous geometry in the folding of myotomes, collagenous myosepta and tendon, and the anatomical distinction between red and white muscle fibers.

Water skating in the larvae of dixella aestivalis (Diptera) and hydrobius fuscipes (Coleoptera)

1999 ◽  
Vol 202 (7) ◽  
pp. 845-853
Author(s):  
J. Brackenbury
Keyword(s):  
High Speed ◽  
The Body ◽  
Water Interface ◽  
Body Movements ◽  
Chironomid Larvae ◽  
High Speed Video ◽  
Adhesive Organ ◽  
Video Recordings ◽  
Air Water Interface

The kinematics of locomotion was investigated in the aquatic larvae of Dixella aestivalis and Hydrobius fuscipes with the aid of high-speed video recordings. Both insects are able to skate on the surface of the water using the dorso-apical tracheal gill as an adhesive organ or ‘foot’. Progress relies on the variable adhesion of the foot between ‘slide’ and ‘hold’ periods of the locomotory cycle. The flexural body movements underlying skating in D. aestivalis can be derived directly from the figure-of-eight swimming mechanism used in underwater swimming. The latter is shown to be similar to figure-of-eight swimming in chironomid larvae. This study shows how the deployment of a ‘foot’ enables simple side-to-side flexural movements of the body to be converted into effective locomotion at the air-water interface.

Light Dance

Leonardo ◽  
2020 ◽  
Vol 53 (1) ◽  
pp. 90-91
Author(s):  
Seth Riskin
Keyword(s):  
Simple Approach ◽  
The Body ◽  
Speed Of Light ◽  
Body Movements ◽  
Room Light ◽  
Shared Space ◽  
Surrounding Space ◽  
The Individual ◽  
Individual Body ◽  
Movement Expression

The author discusses the origin and meaning of his Light Dance artwork. The simple approach—placing a source of light on the body and thereby manipulating the illumination of the surrounding space through body movements—alters the viewer’s perception of space and time. Architecture appears malleable as the performer affects the size, shape and speed of light forms that reach from the body to the boundaries of the room. Light, in this perceptual environment, is not a mere transmitter of information between the invariant material surroundings and the eye of the viewer; light is a space-defining extension of the performer’s body that transposes movement expression from the individual body to the shared space. An inversion of subjective and objective “spaces” is realized in the experience of Light Dance wherein the prevailing conceptual hierarchy of light and vision is overcome.

Consolidation Effects in a Full-Body Diving Task

2017 ◽  
Vol 5 (2) ◽  
pp. 291-303
Author(s):  
Maxime Trempe ◽  
Jean-Luc Gohier ◽  
Mathieu Charbonneau ◽  
Jonathan Tremblay
Keyword(s):  
Skill Acquisition ◽  
Training Session ◽  
Video Camera ◽  
The Body ◽  
Initial Training ◽  
Body Movements ◽  
Training Tool ◽  
Significant Performance ◽  
The Moment ◽  
Full Body

In recent years, it has been shown that spacing training sessions by several hours allows the consolidation of motor skills in the brain, a process leading to the stabilization of the skills and, sometimes, further improvement without additional practice. At the moment, it is unknown whether consolidation can lead to an improvement in performance when the learner performs complex full-body movements. To explore this question, we recruited 10 divers and had them practice a challenging diving maneuver. Divers first performed an initial training session, consisting of 12 dives during which visual feedback was provided immediately after each dive through video replay. Two retention tests without feedback were performed 30 min and 24 hr after the initial training session. All dives were recorded using a video camera and the participants’ performance was assessed by measuring the verticality of the body segments at water entry. Significant performance gains were observed in the 24-hr retention test (p < .05). These results suggest that the learning of complex full-body movements can benefit from consolidation and that splitting practice sessions can be used as a training tool to facilitate skill acquisition.

Numerical Analysis of a Surface Ship in Waves

2020 ◽  
Vol 142 (3) ◽  
Author(s):  
Shawn Aram
Keyword(s):  
Stokes Equations ◽  
Body Motion ◽  
Irregular Waves ◽  
Design Stage ◽  
Fluid Viscosity ◽  
Sea Waves ◽  
Added Resistance ◽  
Physical Mechanisms ◽  
Strip Theory ◽  
Seakeeping Analysis

Abstract Ship's resistance and engine power to sustain ship's speed in seaways are augmented due to complex non-linear interactions between the ship and the ambient sea (waves). Ship designers, in early design stage, use an ad hoc "sea margin" to account for the effects of seaways in selecting propeller and engine. A numerical tool capable of accurately predicting added resistance and power of a ship cruising in waves would greatly help select its powering (margin) requirement and determine the optimal operating point that can maximize the energy efficiency. For seakeeping analysis, strip theory-based methods have long been used. More recently, nonlinear time-domain three-dimensional (3D) panel methods have started being used widely. A more physics-based avenue to seakeeping analysis is offered by coupled solutions of two-phase unsteady Reynolds-Averaged Navier-Stokes equations and six degrees-of-freedom rigid-body motion (RBM) equations. The URANS approach also avails itself of including the effects of propulsors, either explicitly or approximately. By accounting for all the nonlinear effects in hydrodynamic forces and moments and the resulting ship motions, and the effects of fluid viscosity and turbulence, the coupled URANS-RBM method is believed not only able to predict added resistance and speed loss more accurately, but also to provide valuable insights into the physical mechanisms underlying added resistance and power. The objectives of this study are: (1) to validate a coupled URANS-RBM solver developed for high-fidelity prediction of added resistance, speed loss and added power on ships cruising in regular head sea and irregular waves, and (2) to conduct a detailed analysis of the interactions among ship hull, propeller and waves for a 1/49 scaled model of the ONR Tumblehome (ONRT) (Model 5613) in order to shed light on the physical mechanisms leading to added resistance, speed loss and added power. Figure 1 depicts the ONRT self-propellers with two 4-bladed propellers in regular waves. The main flow features such as the free surface, the hub vortices and blade-tip vortices from the propeller, as well as vortices generated by the sonar dome, shafts, shaft brackets and bilge keels are captured.

Unstable Motion of a Floating Structure in Surface Waves

2011 ◽  
Author(s):  
Hongmei Yan ◽  
Yuming Liu ◽  
Yile Li
Keyword(s):  
Natural Frequencies ◽  
Wave Structure ◽  
The Body ◽  
Body Motion ◽  
Irregular Waves ◽  
Nonlinear Instability ◽  
Physical Factors ◽  
Floating Structure ◽  
Practical Applications ◽  
Sum Frequency

Unstable resonant heave and pitch motions of a floating deep draft platform, under the action of a regular wave with the frequency equal to the sum of the heave and pitch natural frequencies, can be developed by nonlinear instability (Liu, Yan & Yung 2010). The instability is associated with difference-frequency interactions between the body motion and the ambient wave. In this work, we study the effect of the nonlinear instability upon floating platforms with relatively shallow drafts whose wave damping at heave/pitch natural frequencies may not be small. Direct time-domain numerical simulations of wave-structure interactions, which can take into account different levels of nonlinearity effects, are applied to understand the characteristics of the unstable coupled heave/pitch (or heave/roll) resonant motion and its dependence on the key physical factors. In particular, it is found that such a nonlinear instability at other wave conditions involving sum-frequency interactions between the body motion and the ambient wave can also occur. For practical applications, long-time nonlinear simulations with irregular waves are also performed. The results show that depending on the sea conditions and damping in the system, the unstable resonant motion associated with the nonlinear instability can be significant for platforms with shallow drafts.

Sign in / Sign up

Export Citation Format

Share Document