Experimental Estimation of Size Effect and Formability in Microscale Deep Drawing Process Using Copper Sheet

2014 ◽  
Author(s):  
Jung Soo Nam ◽  
Sang Won Lee ◽  
Hong Seok Kim
Keyword(s):  
Deep Drawing ◽  
Metal Sheet ◽  
Process Conditions ◽  
Drawing Process ◽  
Copper Sheet ◽  
Feature Size ◽  
Blank Holder ◽  
Deep Drawing Process ◽  
Plastic Deformation Behavior ◽  
Tooling System

In this study, the size dependence of metal sheet on the plastic deformation behavior was investigated in microscale deep drawing process. In order to perform deep drawing experiments, a tooling system was first developed. Then, a series of microscale deep drawing experiments were performed in various process conditions. The blank holder gap between the blank and blankholder was controlled to eliminate the possible defect such as wrinkling. In particular, the effects of feature size were analyzed by comparing the normalized deformation loads at different values of the scale factor λ. It was found that the maximum value of the normalized deformation load and the failure instant were strongly influenced by the feature size of metal sheet.

Blank holder force optimisation strategy in deep drawing process

2007 ◽  
Vol 1 (2) ◽  
pp. 226 ◽  
Author(s):  
Hossam H. Gharib ◽  
Abdalla S. Wifi ◽  
Maher Y.A. Younan ◽  
Ashraf O. Nassef
Keyword(s):  
Deep Drawing ◽  
Drawing Process ◽  
Blank Holder Force ◽  
Blank Holder ◽  
Deep Drawing Process

Study of the Parameters of Deep Drawing Process Based on the Simulation of Dynaform

2012 ◽  
Vol 249-250 ◽  
pp. 51-58
Author(s):  
Qing Wen Qu ◽  
Tian Ke Sun ◽  
Shao Qing Wang ◽  
Hong Juan Yu ◽  
Fang Li
Keyword(s):  
Friction Coefficient ◽  
Sheet Metal ◽  
Deep Drawing ◽  
Drawing Process ◽  
Blank Holder Force ◽  
Blank Holder ◽  
Deep Drawing Process ◽  
Drawing Die ◽  
Drawing Speed

A simulation of deep drawing process on the sheet metal was done by using Dynaform, the influence of blank holder force, deep drawing speed and friction coefficient on the forming speed of sheet metal in the deep drawing process were got. The forming speed of sheet metal determines the quality of deep drawing, in the deep drawing process the blank holder force and the deep drawing speed are controllable parameters, the friction coefficient can be intervened and controlled, and it’s a manifestation of the interaction of all parameters, the main factors which influence the friction coefficient just have blank holder force, deep drawing speed and lubrication except the material. The conclusion of this study provides the basic data for the analysis of the lubrication of mould, the study of lubricant and the prediction of the service life of deep drawing die.

Effect of Blank Holder Force with Low Frequency Vibration Technique in Circular-Cup Deep-Drawing Using AZ31 Magnesium Alloy Sheet

2011 ◽  
Vol 383-390 ◽  
pp. 2785-2789
Author(s):  
Naoki Horiike ◽  
Shoichiro Yoshihara ◽  
Yoshitaka Tsuji ◽  
Yusuke Okude
Keyword(s):  
Deep Drawing ◽  
Low Frequency ◽  
Lubricating Oil ◽  
Drawing Process ◽  
Blank Holder Force ◽  
Forming Process ◽  
Blank Holder ◽  
Deep Drawing Process ◽  
Low Frequency Vibration ◽  
Friction Performance

In the deep-drawing process, the application of low-frequency vibration to the blank material has recently been focused on with the aim of improving the friction performance between the die and the blank material. A servo-controlled press machine is suitable for applying low-frequency vibration to the blank during the deep-drawing process, because the punch speed and blank holder force (BHF) are easily controlled as process parameters by using the servo motors. In this study, a BHF with low-frequency vibration was proposed as a technique for improving deep-drawability, which is mainly affected by the friction performance and the lubricant condition. We found that the friction performance between the blank surface and the blank holder was decreased in the case of a BHF with low-frequency vibration since the lubricating oil rapidly flowed into the clearance during the forming process. Furthermore, for a BHF with low-frequency vibration, the punch force and the deformation resistance were lower than those in a deep-drawing test without low-frequency vibration.

318 Optimization of variable blank holder force trajectory in deep drawing process

2016 ◽  
Vol 2016.53 (0) ◽  
pp. _318-1_-_318-5_
Author(s):  
Hiroki KOYAMA ◽  
Satoshi KITAYAMA ◽  
Takuya NODA ◽  
Ken YAMAMICHI ◽  
Kiichiro KAWAMOTO
Keyword(s):  
Deep Drawing ◽  
Drawing Process ◽  
Blank Holder Force ◽  
Blank Holder ◽  
Deep Drawing Process ◽  
Variable Blank Holder Force

scholarly journals 2111 Study on Effect of Blank Holder Gap on Cylindrical Cup Deep Drawing Process

2010 ◽  
Vol 2010.20 (0) ◽  
pp. _2111-1_-_2111-5_
Author(s):  
Jirasak Srirat ◽  
Koetsu Yamazaki ◽  
Satoshi Kitayama
Keyword(s):  
Deep Drawing ◽  
Drawing Process ◽  
Blank Holder ◽  
Deep Drawing Process ◽  
Cylindrical Cup

scholarly journals Experimental and Numerical Assessment of the Hot Sheet Formability of Martensitic Stainless Steels

2020 ◽  
Vol 4 (4) ◽  
pp. 122
Author(s):  
Peter Birnbaum ◽  
Enrique Meza-García ◽  
Pierre Landgraf ◽  
Thomas Grund ◽  
Thomas Lampke ◽  
...  
Keyword(s):  
Stainless Steels ◽  
Deep Drawing ◽  
Sheet Material ◽  
Uniaxial Tensile ◽  
Process Conditions ◽  
Uniaxial Tensile Test ◽  
Drawing Process ◽  
Deep Drawing Process ◽  
Martensitic Stainless Steels ◽  
Sheet Formability

Hot formed sheet components made of Martensitic Stainless Steels (MSS) can achieve ultra-high strengths in combination with very high corrosion resistance. This enables to manufacture complex lightweight sheet components with longer lifespan. Nevertheless, the hot formability of MSS sheets has not been accurately evaluated considering high temperatures and complex stress and strain states. In this work, the hot sheet formability of three MSS alloys under thermomechanical process conditions was investigated. Initially, mechanical properties of this sheet material were determined by uniaxial tensile test. Finite Element Method (FEM) simulation of a hot deep drawing process was performed under consideration of thermo physical calculated material models using the software JMatPro® and Simufact Forming® 15.0. The resulting strains and cooling rates developed locally in the work piece during the forming process were estimated. The numerical results were validated experimentally. Round cups were manufactured by hot deep drawing process. The resulting maximum drawing depth and hardness were measured. In general, all three alloys developed very good formability at forming temperatures between 700 and 900 °C and increased hardness values. However, they are highly susceptible to chemical composition, austenitization temperature, dwell time, and flange gap. A statistic approach is given to explain the correlation between hardness and its influencing factors.

scholarly journals b EXPERIMENTAL AND FINITE ELEMENT ANALYSIS OF SQUARE DEEP DRAWING PROCESS FOR LAMINATED STEEL-BRASS SHEET METALS

2020 ◽  
Vol 20 (1) ◽  
pp. 12-24
Author(s):  
Hani Aziz Ameen
Keyword(s):  
Deep Drawing ◽  
Thickness Distribution ◽  
Low Carbon Steel ◽  
High Strength ◽  
Experimental Tests ◽  
Drawing Process ◽  
Low Carbon ◽  
Element Analysis ◽  
Blank Holder ◽  
Deep Drawing Process

In this paper, the drawability of two-layer (steel-brass) sheets to produce square cup, is investigated through numerical simulations, and experimental tests. Each material has its own benefits and drawbacks in terms of its physical, chemical and mechanical properties, so that the point of this investigation is taking the benefits of different materials, like (low density, high strength and resistibility of corrosion), at the same time and in a one part. ANSYS18 software is used to simulate the deep drawing process of laminated sheet. The deep drawing processes for square cup were carried out under various blank holder loads with different lubrication conditions (dry and lubricant) and with variable layer arrangement. The materials were low carbon steel st1008 and brass CuZn30 sheets with thickness of 0.5mm0and 0.58mm respectively. The thickness of laminated sheet blank was 1.1 mm and its diameter was 83 mm. The drawn cups with less imperfections and satisfactory thickness distribution were formed in this study. It is concluded the greatest thinning appear in the corner of the cup near the punch radius due to extreme stretching take place in this area. Experimental forming load, blank holder load, and thickness distribution are compared with simulation results. Good agreement between experimental and numerical is evident.

Sign in / Sign up

Export Citation Format

Share Document