Thermal Viscous Dissipative Couette Flow in a Porous Medium Filled Microchannel

2016 ◽  
Author(s):  
Farrukh Mirza Baig ◽  
G. M. Chen ◽  
B. K. Lim
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Nusselt Number ◽  
Couette Flow ◽  
Viscous Dissipation ◽  
Saturated Porous Medium ◽  
Local Thermal Equilibrium ◽  
Uniform Heat Flux ◽  
Brinkman Number ◽  
Essential Information

The increasing demand for high-performance electronic devices and surge in power density accentuates the need for heat transfer enhancement. In this study, a thermal viscous dissipative Coeutte flow in a micochannel filled with fluid saturated porous medium is looked into. The study explores the fluid flow and heat transfer phenomenon for a Coeutte flow in a microchannel as well as to establish the relationship between the heat convection coefficient and viscous dissipation. The moving boundary in this problem is subjected to uniform heat flux while the fixed plate is assumed adiabatic. In order to simplify the problem, we consider a fully developed flow and assume local thermal equilibrium in the analysis. An analytical Nusselt number expression is developed in terms of Brinkman number as a result of this study, thus providing essential information to predict accurately the thermal performance of a microchannel. The results obtained without viscous dissipation are in close agreement with published results whereas viscous dissipation has a more significant effect on Nusselt number for a porous medium with higher porous medium shape factor. The Nusselt number versus Brinkman number plot shows an asymptotic Brinkman number, indicating a change in sign of the temperature difference between the bulk mean temperature and the wall temperature. The effects of Reynolds number on the two dimensional temperature profile for a Couette flow in a microchannel are investigated. The temperature distribution of a microscale duct particularly along the axial direction is a strong function of viscous dissipation. The significance of viscous dissipation to a microscale duct as compared to a conventional scale duct is also discussed and compared in this study.

Natural convective heat transfer in a hemispherical cavity filled with ZnO–H2O nanofluid saturated porous medium

2018 ◽  
Vol 29 (10) ◽  
pp. 1850097 ◽  
Author(s):  
Abderrahmane Baïri ◽  
Najib Laraqi
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Nusselt Number ◽  
Rayleigh Number ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Volume Fraction ◽  
Saturated Porous Medium ◽  
Physical Parameters ◽  
Numerical Work

This three-dimensional (3D) numerical work based on the volume control method quantifies the convective heat transfer occurring in a hemispherical cavity filled with a ZnO–H2O nanofluid saturated porous medium. Its main objective is to improve the cooling of an electronic component contained in this enclosure. The volume fraction of the considered monophasic nanofluid varies between 0% (pure water) and 10%, while the cupola is maintained isothermal at cold temperature. During operation, the active device generates a heat flux leading to high Rayleigh number reaching [Formula: see text] and may be inclined with respect to the horizontal plane at an angle ranging from 0[Formula: see text] to 180[Formula: see text] (horizontal position with cupola facing upwards and downwards, respectively) by steps of 15[Formula: see text]. The natural convective heat transfer represented by the average Nusselt number has been quantified for many configurations obtained by combining the tilt angle, the Rayleigh number, the nanofluid volume fraction and the ratio between the thermal conductivity of the porous medium’s solid matrix and that of the base fluid. This ratio has a significant influence on the free convective heat transfer and ranges from 0 (without porous media) to 70 in this work. The influence of the four physical parameters is analyzed and commented. An empirical correlation between the Nusselt number and these parameters is proposed, allowing determination of the average natural convective heat transfer occurring in the hemispherical cavity.

Non-Darcy Mixed Convection With Thermal Dispersion in a Saturated Porous Medium

2009 ◽  
Vol 132 (1) ◽  
Author(s):  
V. V. Sobha ◽  
R. Y. Vasudeva ◽  
K. Ramakrishna ◽  
K. Hema Latha
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Porous Media ◽  
Nusselt Number ◽  
Mixed Convection ◽  
Vertical Plate ◽  
Saturated Porous Medium ◽  
Thermal Dispersion ◽  
Convection In Porous Media ◽  
Infinite Vertical Plate

Thermal dispersion due to local flows is significant in heat transfer with forced convection in porous media. The effects of parametrized melting (M), thermal dispersion (D), inertia (F), and mixed convection (Ra/Pe) on the velocity distribution, temperature, and Nusselt number on non-Darcy, mixed convective heat transfer from an infinite vertical plate embedded in a saturated porous medium are examined. It is observed that the Nusselt number decreases with increase in melting parameter and increases with increase in thermal dispersion.

Thermal Optimization of a Circular-Sectored Finned Tube Using a Porous Medium Approach

2002 ◽  
Vol 124 (6) ◽  
pp. 1026-1033 ◽  
Author(s):  
Sung Jin Kim ◽  
Jae Wook Yoo ◽  
Seok Pil Jang
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Fluid Flow ◽  
Analytical Solutions ◽  
Numerical Solutions ◽  
Effective Conductivity ◽  
Saturated Porous Medium ◽  
Finned Tube ◽  
Uniform Heat Flux ◽  
Total Thermal Resistance

The present work investigates the heat transfer characteristics of a laminar fully developed forced convection in a circular-sectored finned tube with axially uniform heat flux and peripherally uniform wall temperature. The tubes with circular-sectored fins are modeled as a fluid-saturated porous medium. Using the Brinkman-extended Darcy model for fluid flow and the two-equation model for heat transfer, the analytical solutions for both velocity and temperature distributions are obtained and compared with the exact solution for fluid flow and the numerical solutions for conjugate heat transfer in order to validate the porous medium approach. The agreement between the solutions based on the porous medium approach and the conventional method is close within 5.3 percent. Based on the analytical solutions, parameters of engineering importance are identified to be the angle of the circular sector α and the effective conductivity ratio C, and their effects on fluid flow and heat transfer are studied. Also, the total thermal resistance is derived from the analytical solutions and minimized in order to optimize the thermal performance of a tube with circular-sectored fins.

Semi-Analytical Solution of the Heat Transfer Including Viscous Dissipation in the Steady Flow of a Sisko Fluid in Cylindrical Tubes

2018 ◽  
Vol 140 (7) ◽  
Author(s):  
Sumanta Chaudhuri ◽  
Prasanta Kumar Das
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Fluid Flow ◽  
Analytical Solution ◽  
Viscous Dissipation ◽  
Cylindrical Tube ◽  
Least Square ◽  
Convective Term ◽  
Brinkman Number ◽  
Sisko Fluid

Hydrodynamically and thermally fully developed flow of a Sisko fluid through a cylindrical tube has been investigated considering the effect of viscous dissipation. The effect of the convective term in the energy equation has been taken into account, which was neglected in the earlier studies for Sisko fluid flow. This convective term can significantly affect the temperature distribution if the radius of the tube is relatively large. The equations governing the flow and heat transfer are solved by the least square method (LSM) for both heating and cooling of the fluid. The results of the LSM solution are compared with that of the closed form analytical solution of the Newtonian fluid flow case and are found to match exactly. The results indicate that Nusselt number decreases with the increase in Brinkman number and increases with the increase in the Sisko fluid parameter for the heating of the fluid. In case of cooling, Nusselt number increases with the increase in the Brinkman number asymptotically to a very large value, changes its sign, and then decreases with the increase in Brinkman number. With the increase in the non-Newtonian index, Nusselt number is observed to increase.

Study on Natural Convection in Horizontal Parallel Plate Channels Heated on Upper Wall and Partially Filled With Metal Foam

2020 ◽  
Author(s):  
Bernardo Buonomo ◽  
Vincenzo Fardella ◽  
Oronzio Manca ◽  
Sergio Nardini ◽  
Salvatore Pragliola
Keyword(s):  
Porous Medium ◽  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Average Nusselt Number ◽  
Metal Foam ◽  
Open Cavity ◽  
Temperature Fields ◽  
Local Thermal Equilibrium ◽  
Uniform Heat Flux

Abstract In this work, a numerical investigation on two-dimensional steady state natural convection in a horizontal channel partially filled with a porous medium and heated at uniform heat flux from above is carried out. The lower plate is adiabatic. The porous medium is modeled using the Brinkman–Forchheimer-extended Darcy model and the local thermal equilibrium (LTE) hypothesis is assumed. The structure of the porous medium is homogenous and isotropic, the thermophysical properties of the air and the porous medium are temperature independent and the fluid flow is laminar and incompressible. The aluminum foam has 10, 20 and 40 pore per inches (PPI) and its porosity ranges from 0.90 and 0.95. Rayleigh number values are examined, from 6.0 × 104 and 1.2 × 107. Results are presented in terms of velocity and temperature fields, temperature and velocity profiles at different significant sections are shown, to obtain a description of the natural convection inside the open-ended cavity. Finally, Average Nusselt number values are evaluated. The horizontal open cavity partially filled with metal foam presents improved heat transfer behavior for higher Rayleigh numbers. The enhancement depends on the porosity and pore density. The average Nusselt number for the partially filled open cavity is the double of the configuration without the foam, clear configuration, for the highest considered Rayleigh number.

scholarly journals Effect of constant suction and injection on MHD three dimensional couette flow and heat transfer through a porous medium

2010 ◽  
Vol 6 (1) ◽  
pp. 41-51 ◽  
Author(s):  
S. S. Das
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Nusselt Number ◽  
Temperature Field ◽  
Skin Friction ◽  
Couette Flow ◽  
Three Dimensional ◽  
Injection Parameter ◽  
Constant Suction ◽  
Permeability Parameter

The objective of this paper is to analyzethe effect of constant suction and sinusoidal injection on three dimensional couette flow of a viscous incompressible electrically conducting fluid through a porous medium between two infinite horizontal parallel porous flat plates in presence of a transverse magnetic field. The stationary plate and the plate in uniform motion are, respectively, subjected to a transverse sinusoidal injection and uniform suction of the fluid .The flow becomes three dimensional due to this type of injection velocity distribution. The governing equations of the flow field are solved by using series expansion method and the expressions for the velocity field, the temperature field, skin friction and the rate of heat transfer in terms of Nusselt number are obtained. The effects of the flow parameters on the velocity field, temperature field, skin friction and the Nusselt number have been studied and analyzed with the help of figures and tables. It is observed that a growing magnetic parameter (M) retards the main velocity (u) and accelerates the cross flow velocity (w1) of the flow field and a growing permeability parameter (Kp) or suction / injection parameter (Re) reverses the effect. Both Prandtl number (Pr) and the suction / injection parameter have retarding effect on the temperature field. Further, a growing suction / injection parameter diminishes both the components of skin friction at the wall while the permeability parameter enhances the x-component and reduces the z-component of the skin friction at the wall. The effect of increasing permeability parameter is to enhance the magnitude of rate of heat transfer at the wall while a growing Prandtl number (Pr) reverses the effect.Keywords: MHD; couette flow; heat transfer; suction; sinusoidal injection; porous mediumDOI: 10.3329/jname.v5i2.2570Journal of Naval Architecture and Marine Engineering 6(1)(2009) 41-51 

scholarly journals Thermal Viscous Dissipative Couette-Poiseuille Flow in a Porous Medium Saturated Channel

Symmetry ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 869
Author(s):  
G. M. Chen ◽  
M. Farrukh B. ◽  
B. K. Lim ◽  
C. P. Tso
Keyword(s):  
Reynolds Number ◽  
Porous Medium ◽  
Nusselt Number ◽  
Temperature Field ◽  
Viscous Dissipation ◽  
Poiseuille Flow ◽  
Temperature Fields ◽  
Uniform Heat Flux ◽  
Parallel Plates ◽  
Moving Wall

A Couette-Poiseuille flow between parallel plates saturated with porous medium is studied with emphasis on viscous dissipation effect on the temperature field; assuming a fully developed flow, with both plates subjected to unequal and uniform heat flux. Temperature field and Nusselt number are derived as a function of Brinkman number and porous medium shape factor. By specifying the ratio of wall to mean velocity as one, the resulting velocity and temperature fields attribute to a significant increase in Nusselt number for the moving wall as the permeability of porous medium increases. Increased permeability signifies competing effect between enhanced convection in the proximity of the moving wall and higher local viscous dissipation. When the former effect dominates, heat transfer coefficient increases. Effects of Reynolds number on the temperature field is elucidated, including a comparison between a microchannel and conventional duct to evaluate the characteristic length scale effect. As Reynolds number goes up in a microchannel, heat generation in the form of viscous dissipation intensifies and overrides the convection effect, causing an increase in the highest temperature along the duct on the contrary to the findings in conventional duct.

Sign in / Sign up

Export Citation Format

Share Document