Properties of HDPE/Clay/Wood Nanocomposites

2007 ◽  
Author(s):  
Q. Wu ◽  
Y. Lei ◽  
F. Yao ◽  
Y. Xu ◽  
K. Lian
Keyword(s):  
Thermal Stability ◽  
Tensile Elongation ◽  
Tensile Modulus ◽  
Crystallization Rate ◽  
Clay Content ◽  
Melt Compounding ◽  
Storage And Loss Moduli ◽  
Organic Clay ◽  
The Impact ◽  
Thermal Stability Of

Composites based on high density polyethylene (HDPE), pine flour, and organic clay were made by melt compounding and injection molding. The influence of clay on crystallization behavior, mechanical properties, water absorption, and thermal stability of HDPE/pine composites were investigated. The HDPE/pine composites containing exfoliated clay were made by a two-step melt compounding procedure with a maleated polyethylene (MAPE) as a compatibilizer. Adding 2% clay to a HDPE/pine composite without MAPE decreased the crystallization temperature (Tc) and rate, and the crystallinity level. When 2% MAPE was added, the Tc and crystallization rate increased, but the crystallinity level was lowered. The flexural strength and the tensile strength of HDPE/pine composites increased 19.6% and 24.2% respectively with addition of 1% clay but then decreased slightly as the clay content was increased to 3%. The tensile modulus and tensile elongation were increased 11.8% and 13% respectively with addition of 1% clay but the storage and loss moduli barely change as the clay content was increased to 3%. The impact strength was lowered 7.5% by adding 1% clay, but did not decrease further as more clay was added. The moisture content and thickness swelling of the HDPE/pine composites was reduced by the clay, but did not improve the thermal stability.

The Effects of Oil Palm Fruit Bunch (OPFB) Fiber and Coupling Agent Loadings on the Performance of Hybrid Composites

2012 ◽  
Vol 535-537 ◽  
pp. 154-160 ◽  
Author(s):  
Anizah Kalam ◽  
M.N. Berhan ◽  
Hanafi Ismail
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Oil Palm ◽  
Hybrid Composites ◽  
Tensile Modulus ◽  
Palm Fruit ◽  
Degradation Tests ◽  
Mechanical Performances ◽  
The Impact ◽  
Thermal Stability Of

Hybrid composites were prepared by incorporating oil palm fruit bunch (OPFB) fibre in the mixture of clay and polypropylene as secondary filler. OPFB and MAPP loadings were varied to investigate it effects on the performance. Tensile and impact tests were performed on the hybrid composites to evaluate their mechanical performances. Water absorption and thermal degradation tests were also conducted on the hybrid composites. Results indicated that the incorporation of OPFB in PP/PPnanoclay has decreased the thermal stability of hybrid composites. Tensile modulus of hybrid composites increased as the OPFB loading increases and further increased with the increasing of MAPP loading. Generally the tensile strength has decreased with the addition of OPFB, however slight increased was observed when the MAPP loading was increased. The impact strength has also increased with the increasing of OPFB for higher MAPP loading.

Evaluation of the Impact of Fatty Acid Methyl Ester (FAME) Contamination on the Thermal Stability of Jet A

2013 ◽  
Author(s):  
Jr Morris ◽  
Shardo Robert W. ◽  
Higgins James ◽  
Cook Kim ◽  
Tanner Rhonda ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Fatty Acid ◽  
Methyl Ester ◽  
Fatty Acid Methyl Ester ◽  
Acid Methyl Ester ◽  
Acid Methyl ◽  
The Impact ◽  
Thermal Stability Of

Effect of Clay on the Properties of Polyoxymethylene/Clay Nanocomposites

2012 ◽  
Vol 488-489 ◽  
pp. 82-86 ◽  
Author(s):  
Sirirat Wacharawichanant ◽  
Paramaporn Sahapaibounkit ◽  
Unchana Saeueng
Keyword(s):  
Filler Content ◽  
Clay Content ◽  
Morphological Properties ◽  
Clay Nanocomposites ◽  
Clay Surface ◽  
Degradation Temperature ◽  
Surface Modified ◽  
The Impact ◽  
Thermal Stability Of ◽  
Thermal Degradation Temperature

This work investigated the effect of montmorillonite clay surface modified with 25-30 wt% trimethyl stearyl ammonium (clay) on mechanical, thermal and morphological properties of polyoxymethylene (POM)/clay nanocomposites were investigated. The results showed that POM/clay nanocomposites could maintain or decrease their tensile strength for a certain clay loading range. The Young’s modulus of the nanocomposites increased by adding clay in a range of 0.5-4 wt% while the impact strength showed an increase in a range of 0.5-2 wt%. The percent strain at break of the nanocomposites decreased with increasing filler content. The thermal degradation temperature decreased with an increase of clay content thus the addition of clay did not improve the thermal stability of POM. The microstructure of neat POM and POM/clay nanocomposites was observed that the dispersion of clay was a good in POM matrix at low clay content. The nanocomposites formed the intercalated structure with clay, and the intercalated clay stacks were distributed uniformly in the nanocomposite. The increase of clay content observed increasing of brittleness in POM/clay nanocomposites.

Vinyl-terminated butadiene acrylonitrile improves the toughness, processing window, and thermal stability of bismaleimide resin

2016 ◽  
Vol 29 (10) ◽  
pp. 1199-1208 ◽  
Author(s):  
Dezhi Wang ◽  
Xin Wang ◽  
Lizhu Liu ◽  
Chunyan Qu ◽  
Changwei Liu ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Mechanical Performance ◽  
Resin System ◽  
Excellent Performance ◽  
Bismaleimide Resin ◽  
Processing Window ◽  
Low Viscosity ◽  
Isothermal Test ◽  
The Impact ◽  
Thermal Stability Of

Structural materials with excellent toughness, a wide processing window, outstanding mechanical performance, and high thermal stability are highly desired in engineering. This work reports a novel bismaleimide (BMI) resin system fabricated using bis[4-(4-maleimidephen-oxy)phenyl)]propane (BMPP), 1-(2-methyl-5-(2,5-dioxo-2H-pyrrol-1(5 H)-yl) phenyl)-1H-pyrrole-2,5-dione (BTM), and diallyl bisphenol A (DABPA) by a melt method. The behaviors of the BTM/BMPP/DABPA resin were modified by adding vinyl-terminated butadiene acrylonitrile (VTBN) in various amounts. The cured BTM/BMPP/DABPA/VTBN resin system exhibited all of the abovementioned desirable properties. Excellent performance was achieved by the post-cured BMI resin containing 6 phr of VTBN (VTBN-6). The glass transition temperature ( Tg) and the 5% weight loss temperature of VTBN-6 were 278°C and 408°C, respectively. Relative to VTBN-0 (BMI resin without VTBN), the impact strength of cured VTBN-6 (12.32 KJ/m2) improved by 45.6%, and the fracture toughness values, KIC and GIC, increased by 48.7% and 26%, respectively. Moreover, the prepolymer of VTBN-6 exhibited low viscosity over a wide temperature range (70–200°C) under dynamic conditions and for an extended time (70 min; 75% improvement over VTBN-0) in an isothermal test. These results confirm the wide processing window of VTBN-6. The high toughness of the VTBN-containing BMI resin was compatible with other excellent performances of the modified resin.

Thermal stability, crystallization and mechanical properties of nylon11/montmorillonite nanocomposites

e-Polymers ◽  
2011 ◽  
Vol 11 (1) ◽  
Author(s):  
Yingchun Li ◽  
Guosheng Hu ◽  
Bin He
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Crystallization Behavior ◽  
Nucleating Agent ◽  
Avrami Equation ◽  
Melt Compounding ◽  
Izod Impact ◽  
Nylon 11 ◽  
Thermal Stability Of ◽  
Montmorillonite Nanocomposites

AbstractNylon 11 nanocomposites with different montmorillonite loadings were successfully prepared by melt compounding. XRD and TEM show the exfoliated nanocomposites are formed at low montmorillonite concentration (less than 2 wt%) and the intercalated nanocomposites are obtained at higher montmorillonite contents. TGA shows that the thermal stability of the nanocomposites is improved by 27 °C when the montmorillonite content is only 2wt%. At the same time, The crystallization behavior of nylon11/montmorillonite nanocomposites has been studied by means of XRD, DSC.The Avrami equation described well the isothermal crystallization behavior of nylon11 and nylon11/montmorillonite nanocomposites. The results showed that the montmorillonite acted as the nucleating agent and facilitated the crystal growth rate of nylon 11 matrix. The incorporation of montmorillonite did not change the crystal morphology of nylon 11 but increased the crystallization temperature and decreased the crystallization activation energy, which lead to a easy crystallization of nylon11. Mechanical testing shows that the Izod impact strength of all nanocomposites are higher than that of the neat nylon 11, but the tensile strength of the nanocomposites decrease at low nanofiller concentrations (less than 8wt%) and then increased, when the montmorillonite content is 10wt% ,the tensile strength of the nanocomposite is 5% improved than neat nylon 11. This is may be due to the strong interaction between the nylon 11 matrix and the montmorillonite interface.

The impact of calendar aging on the thermal stability of a LiMn2O4–Li(Ni1/3Mn1/3Co1/3)O2/graphite lithium-ion cell

2014 ◽  
Vol 268 ◽  
pp. 315-325 ◽  
Author(s):  
Patrick Röder ◽  
Barbara Stiaszny ◽  
Jörg C. Ziegler ◽  
Nilüfer Baba ◽  
Paul Lagaly ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Lithium Ion ◽  
Lithium Ion Cell ◽  
The Impact ◽  
Thermal Stability Of

Thermal and Thermomechanical Properties of Poly(butylene succinate) Nanocomposites

2008 ◽  
Vol 8 (4) ◽  
pp. 1679-1689 ◽  
Author(s):  
Mamookho E. Makhatha ◽  
Suprakas Sinha Ray ◽  
Joseph Hato ◽  
Adriaan S. Luyt
Keyword(s):  
Thermal Stability ◽  
Tensile Modulus ◽  
Melting Behavior ◽  
Mechanical Analysis ◽  
Thermomechanical Properties ◽  
Scanning Calorimetry ◽  
Melt Mixing ◽  
Butylene Succinate ◽  
Modulated Differential Scanning Calorimetry ◽  
Thermal Stability Of

This article describes the thermal and thermomechanical properties of poly(butylene succinate) (PBS) and its nanocomposites. PBS nanocomposites with three different weight ratios of organically modified synthetic fluorine mica (OMSFM) have been prepared by melt-mixing in a batch mixer at 140 °C. The structure and morphology of the nanocomposites were characterized by X-ray diffraction (XRD) analyses and transmission electron microscopy (TEM) observations that reveal the homogeneous dispersion of the intercalated silicate layers into the PBS matrix. The thermal properties of pure PBS and the nanocomposite samples were studied by both conventional and temperature modulated differential scanning calorimetry (DSC) analyses, which show multiple melting behavior of the PBS matrix. The investigation of the thermomechanical properties was performed by dynamic mechanical analysis. Results reveal significant improvement in the storage modulus of neat PBS upon addition of OMSFM. The tensile modulus of neat PBS is also increased substantially with the addition of OMSFM, however, the strength at yield and elongation at break of neat PBS systematically decreases with the loading of OMSFM. The thermal stability of the nanocomposites compared to that of the pure polymer sample was examined under both pyrolytic and thermooxidative environments. It is shown that the thermal stability of PBS is increased moderately in the presence of 3 wt% of OMSFM, but there is no significant effect on further silicate loading in the oxidative environment. In the nitrogen environment, however, the thermal stability systematically decreases with increasing clay loading.

Crystallization Behaviours of Poly(vinylidene fluoride) (PVDF) Nanocomposites with MoS2 Nanosheets with Different Surface Functional Groups

2020 ◽  
Vol 20 (12) ◽  
pp. 7535-7543
Author(s):  
Guihai Gan ◽  
Cheng Wang ◽  
Pengpeng Chen ◽  
Jichang Liu
Keyword(s):  
Thermal Stability ◽  
Crystallization Temperature ◽  
Vinylidene Fluoride ◽  
Crystallization Rate ◽  
Cold Crystallization ◽  
Degree Of Crystallinity ◽  
Mos2 Nanosheets ◽  
Surface Functional Groups ◽  
Poly Vinylidene Fluoride ◽  
Thermal Stability Of

The crystallization behaviours of amorphous poly(vinylidene fluoride) (PVDF) nanocompositesmodified with two different kinds of molybdenum disulfide (MoS2) at different filler loadings were investigated in detail in this work. The crystallinity, melting temperature and crystallization temperature of the PVDF/MoS2 nanocomposites were transformed from α-phase to β-phase with the addition of MoS2, MoS2-COOH and MoS2-NH2. During isothermal cold crystallization, the overall crystallization rate of PVDF was slowed with increased MoS2 loading relative to that of neat PVDF. Moreover, the crystallization temperature of the PVDF nanocomposites increased with the addition of MoS2 despite the cooling rate during nonisothermal cold crystallization. DMA tests showed that the storage modulus of PVDF was decreased with the addition of MoS2, while those of PVDF/MoS2-COOH and PVDF/MoS2-NH2 were enhanced to different degrees. The decomposition of the PVDF/MoS2 nanocomposites were also discussed. Relative to neat PVDF, the thermal stability of PVDF was obviously improved with the addition of MoS2, MoS2-COOH and MoS2-NH2, which could be ascribed to the increased degree of crystallinity.

Commingled composites of polypropylene/coir-sisal yarn: effect of chemical treatments on thermal and tensile properties

e-Polymers ◽  
2015 ◽  
Vol 15 (3) ◽  
pp. 169-177 ◽  
Author(s):  
Anil Arya ◽  
Jose E. Tomlal ◽  
George Gejo ◽  
Joseph Kuruvilla
Keyword(s):  
Thermal Stability ◽  
Tensile Properties ◽  
Tensile Modulus ◽  
Fiber Surface ◽  
Metal Plate ◽  
Stability Study ◽  
Reinforced Composites ◽  
Chemical Treatments ◽  
The Matrix ◽  
Thermal Stability Of

AbstractEco-friendly bio-composite of polypropylene (PP)/coir-sisal blended yarn was prepared using commingling technique, in which both the fibers are wound onto a metal plate and then compression molded. Various chemical treatments have been done in order to improve the interfacial adhesion between the matrix and reinforcement, thereby to increase the properties of the composite. Thermal stability study was done using thermogravimetric analysis. The resulting thermogram reveals that chemical treatments increase the thermal stability of the commingled composite to a considerable extent. A significant increase is observed in the tensile properties of the treated composite especially maleic anhydride modified PP (MAPP) treated composite as compared to the untreated one. The tensile strength and tensile modulus of MAPP treated composite was found to be 29.24 MPa and 1330 MPa, respectively, which was found to be 7.5% and 6.4% greater than that of untreated composite. The experimentally observed tensile properties of the composites were compared with the existing models of reinforced composites. The surface morphology and fiber surface treatments were characterized by scanning electron microscopy and Fourier transform infrared spectroscopy.

Sign in / Sign up

Export Citation Format

Share Document