A Predicted Approach for Determining Effective Constants of Fiber Composite With Graded Interphase

2007 ◽  
Author(s):  
Jianhui Zhao ◽  
Zhiying Ou
Keyword(s):  
Fiber Composite ◽  
Fiber Composites ◽  
Effective Moduli ◽  
Concentric Cylinder ◽  
Shear Moduli ◽  
Surrounding Matrix ◽  
Mechanics Of Materials ◽  
Special Case ◽  
Force Equilibrium ◽  
Effective Constants

A predicted approach for determining moduli, which include extensional moduli, shear moduli and Poisson’s ratio is presented for fiber composites with graded interphase. The approach is derived based on a mechanics of materials formulations for the concentric cylinder assembles model of a single fiber, surrounding matrix, and a graded interphase to account for the chemical reaction and diffuseness which commonly occurs between fiber and matrix. The principles of the displacement compatibility and force equilibrium for each constitutes of the representative volume element, converted to those of Equivalent Square assembles, are used in the process of the derived predicted approach without complicated computations. The validity of the predicted approach is demonstrated versus comparisons with experimental data and some other models existing in the literature. Synchronously, it shows that determining effective moduli of fiber composite with graded interphase by micromechanics equations is a special case of the predicted approach.

Effect of Interphases on Micro and Macromechanical Behavior of Hexagonal-Array Fiber Composites

1990 ◽  
Vol 57 (4) ◽  
pp. 956-963 ◽  
Author(s):  
J. D. Achenbach ◽  
H. Zhu
Keyword(s):  
Fiber Composite ◽  
Volume Ratio ◽  
Fiber Composites ◽  
Effective Moduli ◽  
Hexagonal Array ◽  
Fiber Volume ◽  
Unidirectional Fiber Composite ◽  
Circumferential Tensile Stress ◽  
The Matrix ◽  
Stress And Deformation

The effect of interphase stiffness on microstresses and macromechanical behavior has been investigated for transverse loading of an hexagonal-array unidirectional fiber composite. The interphase is modeled by a layer which resists radial extension and circumferential shear deformation. Taking advantage of the periodicity of the medium, the states of stress, and deformation in a basic cell have been analyzed numerically by the use of the boundary element method. The circumferential tensile stress along the matrix side of the interphase and the radial stress in the interphase have been analyzed for various values of the interphase parameters and the fiber volume ratio. The micromechanical results have also been used to determine the effect of interphase stiffness on the effective moduli. The calculated values have been compared with analytical results that were adjusted for interphase stiffness.

scholarly journals Impact Resistance of Epoxy Composites Reinforced with Amazon Guaruman Fiber: A Brief Report

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2264
Author(s):  
Raphael H. M. Reis ◽  
Fabio C. Garcia Filho ◽  
Larissa F. Nunes ◽  
Veronica S. Candido ◽  
Alisson C. R. Silva ◽  
...  
Keyword(s):  
Fiber Composite ◽  
Impact Resistance ◽  
Fiber Composites ◽  
Epoxy Composites ◽  
Impact Performance ◽  
Electron Microscopy Analysis ◽  
Ballistic Properties ◽  
Microscopy Analysis ◽  
Izod Impact ◽  
The Impact

Fibers extracted from Amazonian plants that have traditionally been used by local communities to produce simple items such as ropes, nets, and rugs, are now recognized as promising composite reinforcements. This is the case for guaruman (Ischinosiphon körn) fiber, which was recently found to present potential mechanical and ballistic properties as 30 vol% reinforcement of epoxy composites. To complement these properties, Izod impact tests are now communicated in this brief report for similar composites with up to 30 vol% of guaruman fibers. A substantial increase in impact resistance, with over than 20 times the absorbed energy for the 30 vol% guaruman fiber composite, was obtained in comparison to neat epoxy. These results were statistically validated by Weibull analysis, ANOVA, and Tukey’s test. Scanning electron microscopy analysis disclosed the mechanisms responsible for the impact performance of the guaruman fiber composites.

scholarly journals Characterizing Mat Formation of Bamboo Fiber Composites: Horizontal Density Distribution

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1198
Author(s):  
Yu’an Hu ◽  
Mei He ◽  
Kate Semple ◽  
Meiling Chen ◽  
Hugo Pineda ◽  
...  
Keyword(s):  
Density Distribution ◽  
Fiber Composite ◽  
Fiber Composites ◽  
Density Variation ◽  
Bamboo Fiber ◽  
Wood Composites ◽  
Forming Process ◽  
Bamboo Culm ◽  
Basic Understanding ◽  
Panel Thickness

Bamboo fiber composite (BFC) is a unidirectional and continuous bamboo fiber composite manufactured by consolidation and gluing of flattened, partially separated bamboo culm strips into thick and dense panels. The composite mechanical properties are primarily influenced by panel density, its variation and uniformity. This paper characterized the horizontal density distribution (HDD) within BFC panels and its controlling factors. It revealed that HDD follows a normal distribution, with its standard deviation (SD) strongly affected by sampling specimen size, panel thickness and panel locations. SD was lowest in the thickest (40 mm) panel and largest-size (150 × 150-mm2) specimens. There was also a systematic variation along the length of the BFC due to the tapering effect of bamboo culm thickness. Density was higher along panel edges due to restraint from the mold edges during hot pressing. The manual BFC mat forming process is presented and found to effectively minimize the density variation compared to machine-formed wood composites. This study provides a basic understanding of and a quality control guide to the formation uniformity of BFC products.

Predictions of the Mechanical Performance of Leaf Fiber Thermoplastic Composites by FEA

2021 ◽  
Author(s):  
Faris M. AL-Oqla
Keyword(s):  
Composite Materials ◽  
Cantilever Beam ◽  
Mechanical Performance ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Fiber Composites ◽  
Fiber Types ◽  
Natural Fiber Composites ◽  
Pull Out ◽  
Structural Applications

The available potential plant waste could be worthy material to strengthen polymers to make sustainable products and structural components. Therefore, modeling the natural fiber polymeric-based composites is currently required to reveal the mechanical performance of such polymeric green composites for various green products. This work numerically investigates the effect of various fiber types, fiber loading, and reinforcement conditions with different polymer matrices towards predicting the mechanical performance of such natural fiber composites. Cantilever beam and compression schemes were considered as two different mechanical loading conditions for structural applications of such composite materials. Finite element analysis was conducted to modeling the natural fiber composite materials. The interaction between the fibers and the matrices was considered as an interfacial friction force and was determined from experimental work by the pull out technique for each polymer and fiber type. Both polypropylene and polyethylene were considered as composite matrices. Olive and lemon leaf fibers were considered as reinforcements. Results have revealed that the deflection resistance of the natural fiber composites in cantilever beam was enhanced for several reinforcement conditions. The fiber reinforcement was capable of enhancing the mechanical performance of the polymers and was the best in case of 20 wt.% polypropylene/lemon composites due to better stress transfer within the composite. However, the 40 wt.% case was the worst in enhancing the mechanical performance in both cantilever beam and compression cases. The 30 wt.% of polyethylene/olive fiber was the best in reducing the deflection of the cantilever beam case. The prediction of mechanical performance of natural fiber composites via proper numerical analysis would enhance the process of selecting the appropriate polymer and fiber types. It can contribute finding the proper reinforcement conditions to enhance the mechanical performance of the natural fiber composites to expand their reliable implementations in more industrial applications.

Effect of alkali treatment on the flexural properties of a Luffa cylindrica-reinforced epoxy composite

2018 ◽  
Vol 25 (1) ◽  
pp. 85-93 ◽  
Author(s):  
Niharika Mohanta ◽  
Samir K. Acharya
Keyword(s):  
Flexural Strength ◽  
Treatment Time ◽  
Saline Water ◽  
Fiber Composite ◽  
Alkali Treatment ◽  
Fiber Composites ◽  
Subzero Temperature ◽  
Flexural Properties ◽  
Luffa Cylindrica ◽  
Untreated Fiber

AbstractThis experimental study was conducted to investigate the effect of NaOH concentration and treatment time on the flexural properties ofLuffa cylindricafiber-reinforced epoxy composites. Significant improvement (up to 84.92%) in the flexural properties for the treated fiber composite compared with the untreated fiber composite was observed. Both treated and untreated fiber composites were then subjected to different environmental treatments (saline water, distilled water, and subzero temperature). To find out the changes in flexural strength immediately after treatment, the same test was carried out on the composites. Degradation in the flexural strength of both treated and untreated fiber composites, when subjected to environmental treatments, was observed. They were found within the range of 2%–20% and were found to be least in subzero treatment. The SEM micrograph indicates that alkali treatment is effective in improving the adhesion between the fiber and matrix.

Damage Mechanism Analysis of Carbon Fiber Composites under Compressive Load

2018 ◽  
Vol 775 ◽  
pp. 36-42 ◽  
Author(s):  
Xun Lai He ◽  
Jun Hui Yin ◽  
Zhen Qian Yang ◽  
Hong Wei Liu
Keyword(s):  
Carbon Fiber ◽  
Failure Mode ◽  
Fiber Composite ◽  
Testing Machine ◽  
Compressive Load ◽  
Damage Mechanism ◽  
Fiber Composites ◽  
Carbon Fiber Composites ◽  
Carbon Fiber Composite ◽  
Static Compression

Carbon fiber composite material with light weight, high strength, corrosion resistance and other characteristics of its impact damage mechanism is different from the traditional metal materials. In this paper, the quasi-static compression of carbon fiber composites was carried out by using a material testing machine to analyze the damage mechanism. The Hopkinson bar technology was used to test the dynamic mechanical properties. The damage mechanism of the carbon fiber composites under dynamic compressive loading was studied. Stress - Strain relationship of composites under Quasi - static and dynamic compressive load. It is found that the main failure mode of out-of-plane direction of carbon fiber composite laminates is brittle shear failure, while the in-plane failure mode shows the properties of brittle materials.

Study on Enhancement of Mechanical Strength by Knotted Shape Memory Alloy Fiber in TiNi Fiber Composites

2008 ◽  
Vol 385-387 ◽  
pp. 421-424
Author(s):  
Yong Li Zhao ◽  
Jie Li ◽  
Ming Jin
Keyword(s):  
Shape Memory Alloy ◽  
Mechanical Strength ◽  
Shape Memory ◽  
Fiber Composite ◽  
Stress Transfer ◽  
Fiber Composites ◽  
Tension Test ◽  
Fiber Tension ◽  
The Matrix ◽  
Straight Fiber

In this paper, the experimental investigation into the enhancement of mechanical strength in shape memory alloy (SMA) fiber composites is made by using knotted fiber at the two ends instead of straight fiber. TiNi SMA fiber with both ends knotted is used for purpose of better ensuring stress transfer from the matrix to the fiber than straight fiber. Tension test is carried out above the austenitic finish temperature in air. Specimens are heated by means of electrical resistive lamplight heating. The results indicate that the mechanical strength is larger in the knotted fiber composite than in the straight fiber composite. Knotted fiber exerts the superiority of TiNi SMA fiber composite.

scholarly journals Study on the flexure performance of fine concrete sheets reinforced with textile and short fiber composites

2019 ◽  
Vol 275 ◽  
pp. 02006
Author(s):  
Qiao-chu Yang ◽  
Qin Zhang ◽  
Su-su Gong ◽  
San-ya Li
Keyword(s):  
Glass Fiber ◽  
Fiber Composite ◽  
Basalt Fiber ◽  
Fiber Composites ◽  
Short Fiber ◽  
Calcium Carbonate Whisker ◽  
Flexural Tests ◽  
Short Fiber Composite ◽  
Fiber Mesh ◽  
Concrete Matrix

In order to study the influences of the contents of short fiber on the mechanical properties of concrete matrix, the properties of compressive, flexure and splitting of concrete matrix reinforced by alkali resistant glass fiber and calcium carbonate whisker were tested. To study the reinforced effect of different scale fibers on the flexure behavior of fine concrete sheets, the flexural tests of concrete sheet of fine concrete reinforced with basalt fiber mesh and short fiber composites were carried out. The results show that the properties of the compressive, flexure and splitting of fine concrete reinforced with appropriate amount of alkali resistant glass fiber and carbonate whisker are improved compared with that of concrete reinforced by one type of fiber. The flexure properties of the concrete sheets are improved obviously when continuous fiber textile and short fiber composite are adopted to reinforce.

A Mechanistic Approach to Matrix Cracking Coupled with Fiber–Matrix Debonding in Short-Fiber Composites

2005 ◽  
Vol 127 (3) ◽  
pp. 337-350 ◽  
Author(s):  
Ba Nghiep Nguyen ◽  
Brian J. Tucker ◽  
Mohammad A. Khaleel
Keyword(s):  
Damage Mechanics ◽  
Fiber Composite ◽  
Fiber Composites ◽  
Short Fiber ◽  
Matrix Cracking ◽  
Element Analysis ◽  
Pull Out ◽  
Stiffness Reduction ◽  
Mechanistic Approach ◽  
Fiber Matrix

A micro–macro mechanistic approach to damage in short-fiber composites is developed in this paper. At the microscale, a reference aligned fiber composite is considered for the analysis of the damage mechanisms such as matrix cracking and fiber–matrix debonding using the modified Mori–Tanaka model. The associated damage variables are defined, and the stiffness reduction law dependent on these variables is established. The stiffness of a random fiber composite containing random matrix microcracks and imperfect interfaces is then obtained from that of the reference composite, which is averaged over all possible orientations and weighted by an orientation distribution function. The macroscopic response is determined using a continuum damage mechanics approach and finite element analysis. Final failure resulting from saturation of matrix microcracks, fiber pull-out and breakage is modeled by a vanishing element technique. The model is validated using the experimental results found in literature as well as the results obtained for a random chopped fiber glass–vinyl ester system. Acoustic emission techniques were used to quantify the amount and type of damage during quasi-static testing.

Sign in / Sign up

Export Citation Format

Share Document