Influence Factors of Energy Consumption in All Cold Outdoor Air Systems

Solar Energy ◽  
2006 ◽  
Author(s):  
Bing Wei ◽  
Li Li ◽  
Jiang Lu ◽  
Luxiang Zong ◽  
Zhiwei Wang
Keyword(s):  
Energy Consumption ◽  
Energy Conservation ◽  
Influence Factors ◽  
Operation Time ◽  
Dew Point ◽  
Coefficient Of Performance ◽  
Equivalent Weight ◽  
Outdoor Air ◽  
Full Load ◽  
Full Load Operation

Nowadays the safety of the air conditioning systems is paid more attention to. All cold outdoor air systems due to their particular advantages such as credible safety, better indoor air quality, saving more building space and being in favor of the energy conservation in some given conditions [1] are discussed in this paper. The composing of all cold outdoor air system is outlined and the mathematical models of energy consumption evaluation are presented. With an actual example by using the method of equivalent weight full load operation time, the influence factors to the annual primary energy consumptions in all cold outdoor air systems, such as: the dew point temperature, the COP (Coefficient of Performance) of chiller, the equivalent weight full load operation time of chiller and the efficiency of enthalpy exchanger etc. are compared and analyzed. And the optimal application modes for energy conservation of all cold outdoor air systems are proposed. These can be good references for the application of all cold outdoor air systems.

scholarly journals Analytical Investigation of a Novel System for Combined Dew Point Cooling and Water Recovery

2021 ◽  
Vol 11 (4) ◽  
pp. 1481
Author(s):  
Aleksandra Cichoń ◽  
William Worek
Keyword(s):  
Energy Consumption ◽  
Convective Heat Transfer Coefficient ◽  
Specific Energy Consumption ◽  
Analytical Investigation ◽  
Dew Point ◽  
Energy Utilization ◽  
Coefficient Of Performance ◽  
Air Cooling ◽  
Water Recovery ◽  
Utilization Factor

This paper presents the analytical investigation of a novel system for combined Dew Point Cooling and Water Recovery (DPC-WR system). The operating principle of the presented system is to utilize the dew point cooling phenomenon implemented in two stages in order to obtain both air cooling and water recovery. The system performance is described by different indicators, including the coefficient of performance (COP), gained output ratio (GOR), energy utilization factor (EUF), specific energy consumption (SEC) and specific daily water production (SDWP). The performance indicators are calculated for various climatic zones using a validated analytical model based on the convective heat transfer coefficient. By utilizing the dew point cooling phenomenon, it is possible to minimize the heat and electric energy consumption from external sources, which results in the COP and GOR values being an order of magnitude higher than for other cooling and water recovery technologies. The EUF value of the DPC-WR system ranges from 0.76 to 0.96, with an average of 0.90. The SEC value ranges from 0.5 to 2.0 kWh/m3 and the SDWP value ranges from 100 to 600 L/day/(kg/s). In addition, the DPC-WR system is modular, i.e., it can be multiplied as needed to achieve the required cooling or water recovery capacity.

scholarly journals Energy Conservation Potential of Economizer Controls Using Optimal Outdoor Air Fraction Based on Field Study

Energies ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 5038
Author(s):  
Goopyo Hong ◽  
Chul Kim ◽  
Jun Hong
Keyword(s):  
Energy Consumption ◽  
Energy Conservation ◽  
Temperature Control ◽  
Energy Savings ◽  
Cooling System ◽  
Energy Performance ◽  
Outdoor Air ◽  
Humid Climate ◽  
Differential Enthalpy ◽  
The Impact

In commercial buildings, HVAC systems are becoming a primary driver of energy consumption, which already account for 45% of the total building energy consumption. In the previous literature, researchers have studied several energy conservation measures to reduce HVAC system energy consumption. One of the effective ways is an economizer in air-handling units. Therefore, this study quantified the impact of the outdoor air fraction by economizer control type in cooling system loads based on actual air-handling unit operation data in a hospital. The optimal outdoor air fraction and energy performance for economizer control types were calculated and analyzed. The result showed that economizer controls using optimal outdoor air fraction were up to 45% more efficient in cooling loads than existing HVAC operations in the hospital. The energy savings potential was 6–14% of the differential dry-bulb temperature control, 17–27% of the differential enthalpy control, 8–17% of the differential dry-bulb temperature and high-limit differential enthalpy control, and 16–27% of the differential enthalpy and high-limit differential dry-bulb temperature control compared to the no economizer control. The result of this study will contribute to providing a better understanding of economizer controls in the hospital when the building operates in hot-humid climate regions.

scholarly journals Energy Performance Comparison between Two Liquid Desiccant and Evaporative Cooling-Assisted Air Conditioning Systems

Energies ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 522
Author(s):  
Su Liu ◽  
Jae-Weon Jeong
Keyword(s):  
Energy Consumption ◽  
Air Conditioning ◽  
Evaporative Cooling ◽  
Dew Point ◽  
Outdoor Air ◽  
Liquid Desiccant ◽  
Energy Saving Potential ◽  
Evaporative Cooler ◽  
Air Conditioning Systems ◽  
Direct Evaporative Cooler

This study investigated the annual energy saving potential and system performance of two different evaporative cooling-based liquid desiccant and evaporative cooling-assisted air conditioning systems. One system used an indirect and direct evaporative cooler with a two-stage package to match the target supply air point. The other was equipped with a single-stage, packaged dew-point evaporative cooler that used a portion of the process air, which had been dehumidified in advance. Systems installed with the two evaporative coolers were compared to determine which one was more energy efficient and which one could provide better thermal comfort for building occupants in a given climate zone, using detailed simulation data. The detailed energy consumption data of these two systems were estimated using an engineering equation solver with each component model. The results showed that the liquid desiccant and dew-point evaporative-cooler-assisted 100% outdoor air system (LDEOAS) resulted in approximately 34% more annual primary energy consumption than that of the liquid desiccant and the indirect and direct evaporative-cooler-assisted 100% outdoor air system (LDIDECOAS). However, the LDEOAS could provide drier and cooler supply air, compared with the LDIDECOAS. In conclusion, LDIDECOAS has a higher energy saving potential than LDEOAS, with an acceptable level of thermal comfort.

Research on the Energy Saving Performance of the Enthalpy Recovery Ventilator in Chinese Residential Buildings

Solar Energy ◽  
2006 ◽  
Author(s):  
Junjie Liu ◽  
Bin Wang ◽  
Youhao Xu
Keyword(s):  
Energy Saving ◽  
Residential Buildings ◽  
Influence Factors ◽  
Coefficient Of Performance ◽  
Weather Data ◽  
Outdoor Air ◽  
Enthalpy Recovery ◽  
Save Energy ◽  
Definition Of ◽  
Almost All

In order to fulfill the indoor comfort and health requirements, people need to supply a large amount of outdoor fresh air into the indoor environment. In the past, because of the poor airtight performance of the residential buildings in China, there is usually no mechanical ventilator installed, almost all of the outdoor air infiltrates from the leaks through the windows and doors. Recently, in order to improve the energy saving performance, the windows and doors of the residential buildings become more and more airtight so that the outdoor air can’t infiltrate into the rooms easily, but it results in the worse and worse indoor air quality. People need supply enough outdoor fresh air into the rooms without increasing the energy consumption greatly. The installation of the enthalpy recovery ventilator (ERV) is an effective method. It can transfer heat and moisture from the exhaust air into the outdoor fresh air to save energy. Nowadays, ERV has been widely used in the commercial and industry buildings, and started in the residential buildings in China. But ERV is not always energy saving in anywhere and anytime. Its energy saving performance depends on a lot of factors, such as the outdoor environmental condition, the enthalpy effectiveness of the enthalpy recovery medium, the Coefficient of Performance (COP) of the air condition system and so on. Based on the weather data, this paper calculates the hourly energy saving performance of ERV for residential buildings that are hypothetically located in five Chinese representative cities of five different climate zones in summer. It gives the definition of the cooling ventilation season and studies the influence factors related to the energy saving performance of ERV.

The Strategies of Passive Energy-Efficiency Design in Low Energy Building

2013 ◽  
Vol 368-370 ◽  
pp. 1318-1321
Author(s):  
Xin Bin Wang ◽  
Jia Ping Liu ◽  
Yu Fu
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Conservation ◽  
Air Conditioning ◽  
Influence Factors ◽  
Building Design ◽  
Building Energy ◽  
Low Energy ◽  
Paper Briefly ◽  
Low Energy Consumption

This paper briefly analyzes the structure and conservation approaches of building energy consumption, analyzes the forming reason and influence factors of heating and air-conditioning energy consumption and proposes the passive energy conservation designing strategies of low energy consumption building. Through the passive methods of building design, envelop enclosure and planning landscape, the goal of last year building low energy conservation can be achieved.

scholarly journals Economical aspects of water-mist assisted air-cooled chillers usage in the temperate climate

2018 ◽  
Vol 245 ◽  
pp. 06013
Author(s):  
Arturs Brahmanis ◽  
Anatolijs Borodinecs ◽  
Jelena Tihana ◽  
Jurgis Zemitis ◽  
Daria Monastyreva
Keyword(s):  
Energy Consumption ◽  
Power Distribution ◽  
Cooling System ◽  
Influence Factors ◽  
Water Mist ◽  
Temperate Climate ◽  
Base Temperature ◽  
Outdoor Air ◽  
Global Trends ◽  
The Baltic

The prices for energy resources, global trends for greenhouse gases emission limitation makes the application of higher efficient chillers with process air evaporative cooling more common. In order to determine the economical feasibility for choosing the particular type of cooling unit for the specific building, many factors should be taken into account, which are not always available. One of these factors is the European seasonal energy efficiency ratio (ESEER) defined by the Eurovent Certification Company. It overtakes the outdoor air temperatures from +20° to +35°C with different cooling loads, which is not completely suitable for the Baltic States. Within the research monitoring of cooling system and air parameters was performed during the cooling season. It was indicated that the distribution of the energy generated by the investigated object differs significantly from the distribution of influence factors according to ESEER test methodology. The calculation of the annual energy consumption for the particular historic building according to the recorded power distribution within the outdoor air temperature ranges was performed. Using the proposed method the results are much closer to the actual annual energy consumption of the cooling plant than the one performed using the seasonal efficiency with the base temperature of 18°C.

Impact of roof shading on building energy performance in warm & humid climatic places of India

2020 ◽  
pp. 50-64
Author(s):  
Kuladeep Kumar Sadevi ◽  
Avlokita Agrawal
Keyword(s):  
Energy Consumption ◽  
Energy Conservation ◽  
Energy Performance ◽  
General Assumption ◽  
Climatic Conditions ◽  
Building Envelope ◽  
Passive Cooling ◽  
Base Case ◽  
U Value ◽  
The Impact

With the rise in awareness of energy efficient buildings and adoption of mandatory energy conservation codes across the globe, significant change is being observed in the way the buildings are designed. With the launch of Energy Conservation Building Code (ECBC) in India, climate responsive designs and passive cooling techniques are being explored increasingly in building designs. Of all the building envelope components, roof surface has been identified as the most significant with respect to the heat gain due to the incident solar radiation on buildings, especially in tropical climatic conditions. Since ECBC specifies stringent U-Values for roof assembly, use of insulating materials is becoming popular. Along with insulation, the shading of the roof is also observed to be an important strategy for improving thermal performance of the building, especially in Warm and humid climatic conditions. This study intends to assess the impact of roof shading on building’s energy performance in comparison to that of exposed roof with insulation. A typical office building with specific geometry and schedules has been identified as base case model for this study. This building is simulated using energy modelling software ‘Design Builder’ with base case parameters as prescribed in ECBC. Further, the same building has been simulated parametrically adjusting the amount of roof insulation and roof shading simultaneously. The overall energy consumption and the envelope performance of the top floor are extracted for analysis. The results indicate that the roof shading is an effective passive cooling strategy for both naturally ventilated and air conditioned buildings in Warm and humid climates of India. It is also observed that a fully shaded roof outperforms the insulated roof as per ECBC prescription. Provision of shading over roof reduces the annual energy consumption of building in case of both insulated and uninsulated roofs. However, the impact is higher for uninsulated roofs (U-Value of 3.933 W/m2K), being 4.18% as compared to 0.59% for insulated roofs (U-Value of 0.33 W/m2K).While the general assumption is that roof insulation helps in reducing the energy consumption in tropical buildings, it is observed to be the other way when insulation is provided with roof shading. It is due to restricted heat loss during night.

Spatial-temporal data collection process models using mobile sinks

2019 ◽  
Vol 942 (12) ◽  
pp. 22-28
Author(s):  
A.V. Materuhin ◽  
V.V. Shakhov ◽  
O.D. Sokolova
Keyword(s):  
Energy Consumption ◽  
Operation Time ◽  
Point Of View ◽  
Process Models ◽  
Temporal Data ◽  
Network Nodes ◽  
Mobile Sinks ◽  
Autonomous Operation ◽  
Data Collection Process ◽  
Spatio Temporal

Optimization of energy consumption in geosensor networks is a very important factor in ensuring stability, since geosensors used for environmental monitoring have limited possibilities for recharging batteries. The article is a concise presentation of the research results in the area of increasing the energy consumption efficiency for the process of collecting spatio-temporal data with wireless geosensor networks. It is shown that in the currently used configurations of geosensor networks there is a predominant direction of the transmitted traffic, which leads to the fact that through the routing nodes that are close to the sinks, a much more traffic passes than through other network nodes. Thus, an imbalance of energy consumption arises in the network, which leads to a decrease in the autonomous operation time of the entire wireless geosensor networks. It is proposed to use the possible mobility of sinks as an optimization resource. A mathematical model for the analysis of the lifetime of a wireless geosensor network using mobile sinks is proposed. The model is analyzed from the point of view of optimization energy consumption by sensors. The proposed approach allows increasing the lifetime of wireless geosensor networks by optimizing the relocation of mobile sinks.

scholarly journals Energy Saving Quantitative Analysis of Passive, Active, and Renewable Technologies in Different Climate Zones

2021 ◽  
Vol 11 (15) ◽  
pp. 7115
Author(s):  
Chul-Ho Kim ◽  
Min-Kyeong Park ◽  
Won-Hee Kang
Keyword(s):  
Renewable Energy ◽  
Energy Consumption ◽  
Energy Saving ◽  
High Performance ◽  
Energy Systems ◽  
Outdoor Air ◽  
Climate Zones ◽  
Renewable Energy Systems ◽  
Active Systems ◽  
High Performance Buildings

The purpose of this study was to provide a guideline for the selection of technologies suitable for ASHRAE international climate zones when designing high-performance buildings. In this study, high-performance technologies were grouped as passive, active, and renewable energy systems. Energy saving technologies comprising 15 cases were categorized into passive, active, and renewable energy systems. EnergyPlus v9.5.0 was used to analyze the contribution of each technology in reducing the primary energy consumption. The energy consumption of each system was analyzed in different climates (Incheon, New Delhi, Minneapolis, Berlin), and the detailed contributions to saving energy were evaluated. Even when the same technology is applied, the energy saving rate differs according to the climatic characteristics. Shading systems are passive systems that are more effective in hot regions. In addition, the variable air volume (VAV) system, combined VAV–energy recovery ventilation (ERV), and combined VAV–underfloor air distribution (UFAD) are active systems that can convert hot and humid outdoor temperatures to create comfortable indoor environments. In cold and cool regions, passive systems that prevent heat loss, such as high-R insulation walls and windows, are effective. Active systems that utilize outdoor air or ventilation include the combined VAV-economizer, the active chilled beam with dedicated outdoor air system (DOAS), and the combined VAV-ERV. For renewable energy systems, the ground source heat pump (GSHP) is more effective. Selecting energy saving technologies that are suitable for the surrounding environment, and selecting design strategies that are appropriate for a given climate, are very important for the design of high-performance buildings globally.

Sign in / Sign up

Export Citation Format

Share Document